Skip to content
/ quda Public
forked from lattice/quda

QUDA is a library for performing calculations in lattice QCD on GPUs.

License

Notifications You must be signed in to change notification settings

drossetti/quda

 
 

Repository files navigation

Release Notes for QUDA v0.8.0                         1st February 2016
-----------------------------

Overview:

QUDA is a library for performing calculations in lattice QCD on
graphics processing units (GPUs), leveraging NVIDIA's CUDA platform.
The current release includes optimized Dirac operators and solvers for
the following fermion actions:

* Wilson
* Clover-improved Wilson
* Twisted mass (including non-degenerate pairs)
* Twisted mass with a clover term
* Staggered fermions
* Improved staggered (asqtad or HISQ)
* Domain wall (4-d or 5-d preconditioned)
* Mobius fermion

Implementations of CG, multi-shift CG, BiCGstab, and DD-preconditioned
GCR are provided, including robust mixed-precision variants supporting
combinations of double, single, and half (16-bit "block floating
point") precision.  The library also includes auxilliary routines
necessary for Hybrid Monte Carlo, such as HISQ link fattening, force
terms and clover-field construction.  Use of many GPUs in parallel is
supported throughout, with communication handled by QMP or MPI.


Software Compatibility:

The library has been tested under Linux (CentOS 5.8 and Ubuntu 14.04)
using releases 6.5, 7.0 and 7.5 of the CUDA toolkit.  CUDA 6.0 and
earlier are not supported (though they may continue to work fine).
The library also works on recent 64-bit Intel-based Macs.  Due to
issues with compilation using LLVM, under Mac OS X 10.9.x it is
required to install and use GCC instead of the default clang compiler,
though this is unnecesary with Mac OS X 10.10.x.

See also "Known Issues" below.


Hardware Compatibility:

For a list of supported devices, see

http://developer.nvidia.com/cuda-gpus

Before building the library, you should determine the "compute
capability" of your card, either from NVIDIA's documentation or by
running the deviceQuery example in the CUDA SDK, and pass the
appropriate value to QUDA's configure script.  For example, the Tesla
C2075 is listed on the above website as having compute capability 2.0,
and so to configure the library for this card, you'd run "configure
--enable-gpu-arch=sm_20 [other options]" before typing "make".

As of QUDA 0.8.0, only devices of compute capability 2.0 or greater
are supported.  See also "Known Issues" below.


Installation:

The recommended method for compiling QUDA is to use cmake, and build
QUDA in a separate directory from the source directory.  For
instructions on how to build QUDA using cmake see this page
https://github.com/lattice/quda/wiki/Building-QUDA-with-cmake.

Alternatively, QUDA can also be built using "configure" and "make",
though this build approach is considered deprecated and will be
removed in a subsequent QUDA release.  See "./configure --help" for a
list of configure options.  At a minimum, you'll probably want to set
the GPU architecture; see "Hardware Compatibility" above.

Enabling multi-GPU support requires passing the --enable-multi-gpu
flag to configure, as well as --with-mpi=<PATH> and optionally
--with-qmp=<PATH>.  If the latter is given, QUDA will use QMP for
communications; otherwise, MPI will be called directly.  By default,
it is assumed that the MPI compiler wrappers are <MPI_PATH>/bin/mpicc
and <MPI_PATH>/bin/mpicxx for C and C++, respectively.  These choices
may be overriden by setting the CC and CXX variables on the command
line as follows:

./configure --enable-multi-gpu --with-mpi=<MPI_PATH> \
[--with-qmp=<QMP_PATH>] [OTHER_OPTIONS] CC=my_mpicc CXX=my_mpicxx

Finally, with some MPI implementations, executables compiled against
MPI will not run without "mpirun".  This has the side effect of
causing the configure script to believe that the compiler is failing
to produce a valid executable.  To skip these checks, one can trick
configure into thinking that it's cross-compiling by setting the
--build=none and --host=<HOST> flags.  For the latter,
"--host=x86_64-linux-gnu" should work on a 64-bit linux system.

By default only the QDP and MILC interfaces are enabled.  For
interfacing support with QDPJIT, BQCD or CPS; this should be enabled
at configure time with the appropriate flag, e.g.,
--enable-bqcd-interface.  To keep compilation time to a minimum it is
recommended to only enable those interfaces that are used by a given
application.  The QDP and MILC interfaces can be disabled with the,
e.g., --disable-milc-interface flag.

The eigen-vector solvers (eigCG and incremental eigCG) require the
installation of the MAGMA dense linear algebra package.  It is
recommended that MAGMA 1.7.x is used, though versions are 1.5.x and
1.6.x should work.  MAGMA is available from
http://icl.cs.utk.edu/magma/index.html.  MAGMA is enabled using the
configure option --with-magma=MAGMA_PATH.

If Fortran interface support is desired, the F90 environment variable
should be set when configure is invoked, and "make fortran" must be
run explicitly, since the Fortran interface modules are not built by
default.

As examples, the scripts "configure.milc.titan" and
"configure.chroma.titan" are provided.  These configure QUDA for
expected use with MILC and Chroma, respectively, on Titan (the Tesla
K20X-powered Cray XK7 supercomputer at the Oak Ridge Leadership
Computing Facility).

Throughout the library, auto-tuning is used to select optimal launch
parameters for most performance-critical kernels.  This tuning
process takes some time and will generally slow things down the first
time a given kernel is called during a run.  To avoid this one-time
overhead in subsequent runs (using the same action, solver, lattice
volume, etc.), the optimal parameters are cached to disk.  For this
to work, the QUDA_RESOURCE_PATH environment variable must be set,
pointing to a writeable directory.  Note that since the tuned parameters
are hardware-specific, this "resource directory" should not be shared
between jobs running on different systems (e.g., two clusters
with different GPUs installed).  Attempting to use parameters tuned
for one card on a different card may lead to unexpected errors.


Using the Library:

Include the header file include/quda.h in your application, link
against lib/libquda.a, and study tests/invert_test.cpp (for Wilson,
clover, twisted-mass, or domain wall fermions) or
tests/staggered_invert_test.cpp (for asqtad/HISQ fermions) for
examples of the solver interface.  The various solver options are
enumerated in include/enum_quda.h.


Known Issues:

* For compatibility with CUDA, on 32-bit platforms the library is
  compiled with the GCC option -malign-double.  This differs from the
  GCC default and may affect the alignment of various structures,
  notably those of type QudaGaugeParam and QudaInvertParam, defined in
  quda.h.  Therefore, any code to be linked against QUDA should also
  be compiled with this option.

* When the auto-tuner is active in a multi-GPU run it may cause issues
  with binary reproducibility of this run. This is caused by the
  possibility of different launch configurations being used on
  different GPUs in the tuning run. If binary reproducibility is
  strictly required make sure that a run with active tuning has
  completed. This will ensure that the same launch configurations for
  a given Kernel is used on all GPUs and binary reproducibility.

Getting Help:

Please visit http://lattice.github.com/quda for contact information.
Bug reports are especially welcome.


Acknowledging QUDA:

If you find this software useful in your work, please cite:

M. A. Clark, R. Babich, K. Barros, R. Brower, and C. Rebbi, "Solving
Lattice QCD systems of equations using mixed precision solvers on GPUs,"
Comput. Phys. Commun. 181, 1517 (2010) [arXiv:0911.3191 [hep-lat]].

When taking advantage of multi-GPU support, please also cite:

R. Babich, M. A. Clark, B. Joo, G. Shi, R. C. Brower, and S. Gottlieb,
"Scaling lattice QCD beyond 100 GPUs," International Conference for
High Performance Computing, Networking, Storage and Analysis (SC),
2011 [arXiv:1109.2935 [hep-lat]].

Several other papers that might be of interest are listed at
http://lattice.github.com/quda .


Authors:

Ronald Babich (NVIDIA)
Kipton Barros (Los Alamos National Laboratory)
Richard Brower (Boston University)
Nuno Cardoso (NCSA)
Mike Clark (NVIDIA)
Justin Foley (University of Utah)
Joel Giedt (Rensselaer Polytechnic Institute)
Steven Gottlieb (Indiana University)
Balint Joo (Jefferson Laboratory)
Hyung-Jin Kim (Samsung Advanced Institute of Technology)
Claudio Rebbi (Boston University)
Guochun Shi (NCSA)
Alexei Strelchenko (Fermi National Accelerator Laboratory)
Alejandro Vaquero (INFN Sezione Milano Bicocca)
Mathias Wagner (NVIDIA)

Portions of this software were developed at the Innovative Systems Lab,
National Center for Supercomputing Applications
http://www.ncsa.uiuc.edu/AboutUs/Directorates/ISL.html

Development was supported in part by the U.S. Department of Energy
under grants DE-FC02-06ER41440, DE-FC02-06ER41449, and
DE-AC05-06OR23177; the National Science Foundation under grants
DGE-0221680, PHY-0427646, PHY-0835713, OCI-0946441, and OCI-1060067;
as well as the PRACE project funded in part by the EUs 7th Framework
Programme (FP7/2007-2013) under grants RI-211528 and FP7-261557.  Any
opinions, findings, and conclusions or recommendations expressed in
this material are those of the authors and do not necessarily reflect
the views of the Department of Energy, the National Science
Foundation, or the PRACE project.

About

QUDA is a library for performing calculations in lattice QCD on GPUs.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 32.0%
  • Cuda 31.0%
  • C++ 29.6%
  • Python 4.5%
  • Objective-C 2.1%
  • M4 0.2%
  • Other 0.6%