An open-sourced Alice/Arisu style keyboard case. Modified from FateNozomi's Arisu
- Designed for 3d printing
- Gasket Mounted Desgin using gasket strips on the side of the plate
- Strip material: Poron Foam or Silicon Rubber
- Includes dxf files of sound dampening material between PCB and plate
- Compatible with FateNozomi's PCB
- Dimensions: 30x142x375mm (DxHxW)
- Front Height: 16.5mm
- 5 degree typing angle
If you just want to build your own Blossom using the easiest steps just skip to DIY Guide Below is the contents of the respected folders in this GitHub Repo:
PCB files- contains the Kicad project of the experimental version of the PCB(with underglow), modified from original FateNozomi's one.Renders- contains image assets.blender- contain Blender file of the case in case you need to do some edits to the model.case_stls- stl files exported from Blender.plate_dxfs- contains dxf files for plate and gasketproduction- contains files necessary for DIY or productionqmk- Modified keyboard firmware from arisu with added RGB underglow functionality.
- Use the files at your own risk
- PCB files are still under development,you can use it, but also at your own risk
| Item | Image | Description | Related Files | Place to Buy |
|---|---|---|---|---|
| Upper Case * 1 |  |
Upper section of the case | U_Case.stl | PCBWay |
| Lower Case * 1 |  |
Lower Section of the case | B_Case.stl | PCBWay |
| PCB * 1 |  |
Can be chosed from experimental version, which have backlight. Or original FateNozomi's version. | Original: gerber bom CPL Experimental: gerber BOM CPL | JLPCB PCBWay |
| Gasket & Sound Dampening Foam * 1 |  |
Can be Poron or Silicon | gasket_n_sdl.dxf | TaoBao |
| Plate * 1 |  |
/ | plate.dxf | Ponoko TaoBao(PC) SendCutSend |
| M2.5 Screws * 8 | / | / | / | Ebay Taobao |
| M2.5 Insert * 8 | / | / | / | Amazon Taobao |
Step 1 - Install the switches into the plate
Step 2 - place the sound dampening material between the plate and PCB
Step 3 - Solder the switches
Step 4 - Stick the gasket of the material of your choice to the extended positions on the plate
Step 5 - Install the M2.5 inserts in the 8 positions on the upper case shown below
Step 6 - Place the plate with the pcb on top of the bottom case
Step 7 - Cover it with the upper case
Step 8 - Install screw in the following positions to fix both upper and bottom case
Final Step - Connect your keyboard to a computer. Download the Arisu Firmware from VIA and fiash it to your keyboard. Tools such as QMK Toolbox Is recommended. Here is a quick guide on how to use QMK toolbox just for reference.
If you are using the experimental version. you need to change the config.h file's RGB_DI_PIN's value to F4