Skip to content

dilshan/avr-hv2

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

14 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

AVR High Voltage Programmer 2

AVR-HV2 Prototype with Arduino MEGA board

AVR-HV2 is Arduino based high voltage parallel programmer for AVR microcontrollers. This programmer can read, write, and erase both flash memory and EEPROM. Also, this can use to set fuse bits of AVR MCUs.

AVR-HV2 programmer is designed as an Arduino Mega shield. Dimensions of the AVR-HV2 are similar to the Arduino Mega board. It can be powered using a power source connected to the Arduino Mega board. The suggested power source for this programmer is a 12V 1A DC power adapter.

The control software of this programmer is design to work on both Windows and Linux operating systems. It supports the import and export of memory data in the Intel hex file format. The communication link between the programmer and the control software is established through the USB port.

The current firmware and control software of this programmer supports most of the generally available AVR MCUs which including ATmega8, ATmega328, ATmega32, ATmega16, etc. The AVR MCUs with extended addressing modes are currently not supported.

The PCB board used in this project is sponsored by the PCBWay. PCB of this project can directly order from PCBWay through this link.

This is a certified open-source hardware project. All the design files, documentation and firmware source code are available to download at the project source repository. All the content of this project are distributed under the terms of the following license:

OSHW-LK000007