Arduino-Pro-Micro-based-Refueling-System

Solo Project: Arduino Pro Micro-based Refueling System

Coming Soon...

Project Requirements

Part	Description
Development Board	Arduino Pro Micro Leonardo ATMEGA32U4
Code Editor	Arduino IDE
Driver	CH340 USB Driver
Programming Language	C/C++
Arduino Library	• LiquidCrystal_I2C • Keypad
Actuators	Submersible pump (x2)
Sensor	SEN-0009: Water Level (x1)
Display	LCD I2C (x1)
Other Components	• Micro USB cable - USB type A (x1) • Jumper cable (1 set) • Breadboard (x1) • Adaptor DC 5V (x1) • 4x4 keypad membrane button (x1) • Push button 12 x 12 mm (x1) • Mini water gallon (x2)

Download & Install

1. Arduino IDE

   https://bit.ly/ArduinoIDE_Installer

   
   

2. CH340 USB Driver

   https://bit.ly/CH340_USB_Driver

Project Designs

Block Diagram	Pictorial Diagram

Wiring

Arduino IDE Setup

1. Open the Arduino IDE first, then open the project by clicking File -> Open :

   Refueling_System.ino

   
   

2. Board Setup in Arduino IDE

   How to setup the Arduino Pro Micro board
   Click Tools -> Board -> Arduino AVR Boards -> Arduino Micro

   
   

3. Change the Board Speed in Arduino IDE

   Click Tools -> Upload Speed -> 9600

   
   

4. Install Library in Arduino IDE

   Download all the library zip files. Then paste it in the: C:\Users\Computer_Username\Documents\Arduino\libraries

   
   

5. Port Setup in Arduino IDE

   Click Port -> Choose according to your device port (you can see in device manager)

   
   

6. Before uploading the program please click: Verify.
   
   

7. If there is no error in the program code, then please click: Upload.
   
   

8. If there is still a problem when uploading the program, then try checking the driver / port / others section.

Get Started

1. Download and extract this repository.
   
   

2. Make sure you have the necessary electronic components.
   
   

3. Make sure your components are designed according to the diagram.
   
   

4. Configure your device according to the settings above.
   
   

5. Please enjoy [Done].

Highlights

Appreciation

If this work is useful to you, then support this work as a form of appreciation to the author by clicking the ⭐Star button at the top of the repository.

Disclaimer

This application has been created by including third-party sources. Third parties here are service providers, whose services are in the form of libraries, frameworks, and others. I thank you very much for the service. It has proven to be very helpful and implementable.

LICENSE

MIT License - Copyright © 2024 - Devan C. M. Wijaya, S.Kom

Permission is hereby granted without charge to any person obtaining a copy of this software and the software-related documentation files to deal in them without restriction, including without limitation the right to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons receiving the Software to be furnished therewith on the following terms:

The above copyright notice and this permission notice must accompany all copies or substantial portions of the Software.

IN ANY EVENT, THE AUTHOR OR COPYRIGHT HOLDER HEREIN RETAINS FULL OWNERSHIP RIGHTS. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, THEREFORE IF ANY DAMAGE, LOSS, OR OTHERWISE ARISES FROM THE USE OR OTHER DEALINGS IN THE SOFTWARE, THE AUTHOR OR COPYRIGHT HOLDER SHALL NOT BE LIABLE, AS THE USE OF THE SOFTWARE IS NOT COMPELLED AT ALL, SO THE RISK IS YOUR OWN.