Skip to content

designer2k2/warpi

Repository files navigation

warpi

"GUI" script running on a Raspberry Pi 4 (and 3b), handling the startup, conversion and shutdown procedure.

Setup:

See the article on my website on how to setup the complete system: designer2k2.at Wardriving setup

warpi in action

User interface:

User Interface

  • Blue button: Shutdown. Stops Kismet, converts the file and then powers down the raspberry pi.
  • Red button: Reboot. Reboot from the raspberry pi without file conversion.
  • Yellow push direction: Stop. Stops Kismet. Useful to reload the config.
  • Green push direction: Start. Starts Kismet. Useful after it has been stopped.
  • Left arrow: switch between screens.

Screen information:

Screen

First line: CPU Load in % / Memory usage in % / CPU Temperature in °C
Second line: GPS Status (3=3D lock, 2=2D lock, 1=No lock) / Satellites in View / Satellites used / Status
Third line: Devices found by kismet
Fourth line: Memory used by kismet
Fifth line: Current time / Live blink