Skip to content

Home

Jump to bottom
Coela Can't! edited this page Aug 19, 2021 · 8 revisions

Welcome to the ProtoTracer wiki! Here you will find information on how to set up the ProtoTracer, add 3d objects, and materials.

Recommendations

The following hardware requirements are recommendations and may not fit your specific use case:

  • Use a microcontroller with a 32-bit FPU
  • Use a microcontroller with a 200MHz+ processor
  • Use a microcontroller with at least 80KB of dynamic memory

Using the ProtoTracer

In the following pages you will learn everything you'll need to run this project:

Questions?

Any recommendations on additional information to add can be requested in the discussions tab. If you have additional questions, you can @ me in my Discord server or on direct message me on Twitter.

Clone this wiki locally