Setup Guide: Raspberry Pi | Wireless Setup
Austin St. Aubin edited this page Nov 10, 2017
·
1 revision
https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=139866 https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=139486
# Bring Wireless Up
sudo ifup wlan0
# Scan for wireless networks
sudo iwlist wlan0 scan
# Open the wpa-supplicant configuration file in nano:
sudo nano /etc/wpa_supplicant/wpa_supplicant.conf
# ----------
network={
ssid="YOUR_SSID"
scan_ssid=1
psk="YOUR_PASSKEY"
mode=0
proto=WPA2
key_mgmt=WPA-PSK
pairwise=CCMP
group=CCMP
auth_alg=OPEN
id_str="raspi"
priority=1
}
# ----------
# Restart Interface
sudo ifdown wlan0
sudo ifup wlan0
# Check Interface for IP
ifconfig wlan0
Join CNCjs Users Group on Facebook to share your experiences with other people.
Site: https://cnc.js.org
- Introduction
- Installation
- Using Pendants
-
Raspberry Pi Setup Guide
- System Setup & Preparation
- Install Node.js & CNCjs
- Install Node.js via Package Manager (Recommended)
- Install Node.js via Node Version Manager (NVM) (Alternative)
- Install Node.js Manually (Alternative)
- Use PM2 to auto-start CNCjs (Optional)
- Use Port 80 (Optional)
- Maintain
- Additional Setup Options:
- CNCjs UI on Pi - Adventures in PiLand
- Pi with Arduino Due
- Electron App
- User Guide
- Tool Change
- Troubleshooting
-
FAQ
- Forgot your password?
- How can I enable WebGL in my browser?
- Raspberry Pi: Error opening serial port "ttyAMA0"
- Webcam Streaming with Raspberry Pi
- Restream RTSP to M-JPEG
- Connect to an Arduino using WiFi
- Install Native Addons with Node.js v4
- Install Serialport on OS X El Capitan
- Kernel panic issue on macOS Sierra for devices using the CH340G, CH34G or CH34X chipset
- Testing without Arduino board
- Development
- API
- Wiki History
- Resources
- About