Setup Guide: Raspberry Pi | Raspberry Pi Shutdown Button & LED Script
Install & Setup for RaspPi GPIO Pendant: cncjs-pendant-raspi-gpio
Gracefully shutdown the Raspberry Pi using a hardware button.
- http://www.banggood.com/Power-Symbol-Latching-Switch-LED-Light-Push-Button-SPST-p-1064278.html
- https://cad.onshape.com/documents/94796d1c35c5a20444b82aa2/w/23a4445409a14a7f19bbd918/e/306a16744c5d0f265eb26f3c
NOTE: Jumping pins 5 & 6 (grounding GPIO3) will power on the RPi. So I altered the script to use GPIO3, rather than pin 40. Now I can use the same button to turn on and off the Pi!
See RaspPi GPIO Pendant: cncjs-pendant-raspi-gpio
Site: https://cnc.js.org
- Introduction
- Installation
- Using Pendants
-
Raspberry Pi Setup Guide
- System Setup & Preparation
- Install Node.js & CNCjs
- Install Node.js via Package Manager (Recommended)
- Install Node.js via Node Version Manager (NVM) (Alternative)
- Install Node.js Manually (Alternative)
- Use PM2 to auto-start CNCjs (Optional)
- Use Port 80 (Optional)
- Maintain
- Additional Setup Options:
- CNCjs UI on Pi - Adventures in PiLand
- Pi with Arduino Due
- Electron App
- User Guide
- Tool Change
- Troubleshooting
-
FAQ
- Forgot your password?
- How can I enable WebGL in my browser?
- Raspberry Pi: Error opening serial port "ttyAMA0"
- Webcam Streaming with Raspberry Pi
- Restream RTSP to M-JPEG
- Connect to an Arduino using WiFi
- Install Native Addons with Node.js v4
- Install Serialport on OS X El Capitan
- Kernel panic issue on macOS Sierra for devices using the CH340G, CH34G or CH34X chipset
- Testing without Arduino board
- Development
- API
- Wiki History
- Resources
- About