nixos-router

This project has an ambitious goal of creating a framework for writing NixOS router configurations - in other words, being the simple-nixos-mailserver of the networking world, but without the "simple" part, because networking is hard. This may include complex features like running multiple DHCP servers, using network namespaces, having interfaces turn on and off while the rest of the system keeps working, etc.

Sadly, NixOS is written without such requirements in mind. That means this project has to create the code from scratch. This is both a blessing and a curse - we can't reuse the existing code, but we can write new, better code that is more flexible.

That said, I'm not using this at an enterprise or an ISP, this is simply for my home router config (yes, overkill, I know). So this is bound to not fit everybody's needs right now. Obviously, I'm willing to add more features even at the cost of breaking existing configs if necessary (after all, this project is in its infancy).

I'll try to keep breaking changes to a minimum, but as I said, I can't guarantee they won't happen (even NixOS has them).

Use the 23.11 branch for NixOS 23.11. I'll backport what I can to it. For nixos-unstable, use the master branch.

I doubt it would be easy to upstream these changes to nixpkgs, as it would introduce many breaking changes on top of breaking changes, so I am not willing to work on it. Some parts are more upstreamable, such as allowing JSON nftables rulesets, while other are less upstreamable, like... most parts of this repo, which are a reimplementation of scripted networking, which some nixpkgs members want to get rid of in general (in favor of systemd-networkd).

When this gets closed, I might be able to migrate to systemd-networkd. This may be the time when networking.interfaces and this repo become compatible again.

This module expects you to use nftables, so it modifies NixOS's default settings to use nftables. Firewall is still set to use iptables, but if you set networking.nftables.enable to true, it should use nftables.

Roadmap

I think the next logical step for this project is adding nftables options for common scenarios like NAT, so this is what I want to do next. Right now you're expected to create the nftables rules from scratch, but something like networking.nat (but with more customizability) could be nice. Another potential way to improve this is adding the missing virtual device types (currently only bridges and veth pairs are supported; networking has bridge, bond, MacVLAN, 6-to-4, VLAN, Open vSwitch device support).

See also

• notnft - a Nix DSL for writing JSON nftables rules. If you use the included NixOS module, it is automatically used for type checking JSON nftables rules.
• My router config using this framework.

Options

See the wiki for an automatically built option list. This is a manually condensed version of the option list.

• router.enable - whether to do anything at all
• router.networkNamespaces - per-network namespace config.
  • A special namespace default is available for configuring the default namespace.
  • <namespace>.extraStartCommands - extra commands to execute at network namespace start
  • <namespace>.extraStopCommands - extra commands to execute at network namespace stop
  • <namespace>.rules - IP routing rules to add for this namespace via ip rule
    • <route>.ipv6 - whether this rule is an IPv6 rule
    • <route>.extraArgs - arguments to pass to the ip rule command. May be a list or a string.
  • <namespace>.nftables - nftables config to run in this namespace (see router.nftables for options)
    • Difference from networking.nftables - this supports JSON rulesets, and lets you specify custom stop/reload rules, while networking.nftables always flushes the ruleset on stop. Also, it supports loading static rules and file-based rules at the same time. One-way networking.nftables operability is supported.
    • <namespace>.nftables.textFile - .nft file to load
    • <namespace>.nftables.textRules - nft rules to load
    • <namespace>.nftables.jsonFile - .json file to load
    • <namespace>.nftables.jsonRules - JSON rules to load
    • <namespace>.nftables.{stopTextFile,stopTextRules,stopJsonFile,stopJsonRules} - same as above, but get executed before first start and at stop/reload time. Basically, they are supposed to undo the changes this ruleset applies, or do nothing if it's not applied anyway. They default to flush ruleset if no stop rules are set.
• router.veths.<name> - veth pairs
  • <veth>.peerName - peer name (second device to be created at the same time)
• router.interfaces.<name> - per-interface config
  • Difference from networking.interfaces - it's just subtly different... Many features were added that networking.interfaces is incompatible with. This means you can't use it together with networking.interfaces, as both router.interfaces and networking.interfaces expect having to set the interfaces up.
  • <iface>.bridge - bridge name to enslave this device to
  • <iface>.vlans.* - VLAN filtering configuration
    • <vlan>.vid - VLAN id filter
    • <vlan>.untagged - whether this should match untagged traffic (defaults to false)
  • <iface>.extraInitCommands - extra commands to execute before bridge/address configuration
  • <iface>.networkNamespace - the network namespace where this device and all dependent services will run
  • <iface>.dependentServices - services that should depend on this interface
    • each is either a string (service name) or an attrset with the key service and the rest being attrs to to pass to router-lib.mkServiceForIf', for example, you can set inNetns to false to not use this interface's network namespace.
  • <iface>.systemdLink.linkConfig - values to add to systemd.link(5) [Link] config for this interface
  • <iface>.systemdLink.matchConfig - values to add to systemd.link(5) [Match] config for this interface. Defaults to { OriginalName = "<interface name>"; }
  • <iface>.hostapd - run hostapd to turn this device into a wireless access point
    • <iface>.hostapd.enable - enable hostapd
    • <iface>.hostapd.settings - hostapd settings (attrset). See example hostapd.conf for a list of options. Personally, I copied OpenWRT configs for my router.
    • There's a way to host multiple ssids on a single interface in hostapd (on supported interfaces), this module doesn't currently support it
  • <iface>.dhcpcd - run dhcpcd on this interface.
    • The reasons for adding it here:
      • dhcpcd may fail in rare cases when not specifing the interface list in the command line, which I do here.
      • Strong caution is needed when running a single dhcpcd on many interfaces, as settings may "leak" into other interfaces. Example of an option you need to be careful with is IPv6 router solicitation (ipv6rs).
    • <iface>.dhcpcd.enable - enable dhcpcd on this interface
    • <iface>.dhcpcd.extraConfig - extra text config for dhcpcd
  • <iface>.ipv4 - IPv4-specific config:
    • <iface>.ipv4.enableForwarding - sets forwarding sysctl for this device so it can forward packets it receives.
    • <iface>.ipv4.rpFilter - set rp_filter value for this device to check reverse path and block non-existent IPs (value 2) or IPs coming from the wrong interfaces (value 1). Alternatively, you can ignore this and query fib in nftables.
    • <iface>.ipv4.addresses - IPv4 addresses of this device
      • <addr>.address - the address
      • <addr>.prefixLength - network prefix length
      • <addr>.assign - whether to actually assign the address to this device (defaults to false if the first octet is zero and true otherwise). If not, it will simply be used as default value for service config.
      • <addr>.gateways - for DHCP servers - the IPv4 gateways for this network. If not set, address is used as the sole gateway.
      • <addr>.dns - for DHCP servers - IPv4 DNS servers for this network.
      • <addr>.keaSettings - prefix-specific Kea settings (only used if Kea is enabled). pools has sane defaults (reserve 16 addresses before and after the interface address and before and after prefix start/end, make the rest available for DHCP clients), option-data defaults to whatever you set in gateways and dns. If you want to unset those settings, overwrite pools and option-data with empty (or non-empty) lists.
    • <iface>.ipv4.routes - List of IPv4 route to add when this device is online.
      • <route>.extraArgs - arguments to pass to the ip -4 add command. May be a list or a string.
      • There is no other options for routes, that's it.
    • <iface>.ipv4.kea - Kea settings (maintained replacement for dhcpd)
      • <iface>.ipv4.kea.enable - enable Kea
      • <iface>.ipv4.kea.extraArgs - extra args to pass to Kea
      • <iface>.ipv4.kea.configFile - Kea config file (if this is set, all other Kea settings are ignored)
      • <iface>.ipv4.kea.settings - Kea settings. Defaults to one subnet4 (see addresses.keaSettings for a way to configure it), valid-lifetime = 4000, lease-database set to a file at /var/lib/kea/dhcp4-${interface}.leases, and obviously interfaces-config set. You may overwrite any of it.
  • <iface>.ipv6 - IPv6-specific config:
    • <iface>.ipv6.enableForwarding - sets forwarding sysctl for this device so it can forward packets it receives. Obviously, you better setup a firewall if you do this.
    • <iface>.ipv6.addresses - List of IPv6 addresses of this device
      • <addr>.address - the address
      • <addr>.prefixLength - network prefix length
      • <addr>.assign - whether to actually assign the address to this device (defaults to false if the first octet is zero and true otherwise). Otherwise, it will simply be used as default value for service config.
      • <addr>.gateways - for DHCP servers - the IPv6 gateways for this network. If empty, I don't know what happens, you guess.
        • Each gateway may be a string in the CIDR notation. Alternatively, it may be an attrset with the following attrs:
        • <gateway>.address - the address
        • <gateway>.prefixLength - network prefix length
        • <gateway>.radvdSettings - radvd route settings for this gateway (attrset)
        • <gateway>.coreradSettings - CoreRAD route settings for this gateway (attrset)
      • <addr>.dns - for DHCP servers - IPv6 DNS servers for this network.
        • Each DNS server may be a string (the DNS address). Alternatively, if may be an attrset with the following attrs:
          • address - the DNS server address
          • radvdSettings - radvd RDNSS settings for this DNS server (attrset)
          • coreradSettings - CoreRAD rdnss settings for this DNS server (attrset)
      • <addr>.keaSettings - prefix-specific Kea settings (only used if Kea is enabled). pools has sane defaults (reserve 16 addresses before and after the interface address and before and after prefix start/end, make the rest available for DHCP clients), option-data defaults to whatever you set in dns. If you want to unset it settings, overwrite pools and option-data with empty (or non-empty) lists.
      • <addr>.radvdSettings - radvd per-prefix settings (attrset). AdvAutonomous defaults to true if AdvManagedFlag is set to true in per-interface radvd settings.
      • <addr>.coreradSettings - CoreRAD per-prefix settings (attrset). autonomous defaults to true if managed is set to true in per-interface CoreRAD settings.
    • <iface>.ipv6.routes - List of IPv6 routes to add when this device is online.
      • <route>.extraArgs - arguments to pass to the ip -6 add command. May be a list or a string.
      • There is no other options for routes, that's it.
    • <iface>.ipv6.kea - Kea settings (maintained replacement for dhcpd)
      • <iface>.ipv6.kea.enable - enable Kea
      • <iface>.ipv6.kea.extraArgs - extra args to pass to Kea
      • <iface>.ipv6.kea.configFile - Kea config file (if this is set, all other Kea settings are ignored)
      • <iface>.ipv6.kea.settings - Kea settings. Defaults to one subnet6 (see addresses.*.keaSettings for a way to configure it), valid-lifetime = 4000, preferred-lifetime = 3000 lease-database set to a file at /var/lib/kea/dhcp6-${interface}.leases, and obviously interfaces-config set. You may overwrite any of it.
    • <iface>.ipv6.radvd - radvd settings (IPv6 router advertisement daemon)
      • <iface>.ipv6.radvd.enable - enable radvd
      • <iface>.ipv6.radvd.interfaceSettings - per-interface settings (attrs). Defaults to AdvSendAdvert = true, if any DHCP server (e.g. Kea) is enabled then AdvManagedFlag and AdvOtherConfigFlag default to true as well.
    • <iface>.ipv6.corerad - CoreRAD settings (IPv6 router advertisement daemon)
      • <iface>.ipv6.corerad.enable - enable radvd
      • <iface>.ipv6.corerad.interfaceSettings - per-interface settings (attrs). Defaults to advertise = true, if any DHCP server (e.g. Kea) is enabled then managed and other_config default to true as well.
      • <iface>.ipv6.corerad.settings - general CoreRAD settings (useful for setting debug options)