Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Pause and Pause Mode Settings Not Working Correctly with Horizon 7.4-AT-03 #2303

Closed
hellobensalt opened this issue Apr 22, 2024 · 9 comments
Closed

Pause and Pause Mode Settings Not Working Correctly with Horizon 7.4-AT-03 #2303

hellobensalt opened this issue Apr 22, 2024 · 9 comments
Assignees
@cagnulein
Labels
bug Something isn't working wontfix This will not be worked on

Comments

@hellobensalt
Copy link

Hardware/software: Horizon 7.4AT-03 treadmill, Pixel 6 phone running latest Android version, QZ 2.16.50

  • QZ always connects to my treadmill in pause mode. The General and Horizon Treadmills pause mode settings are set to the default (off). Turning them on and off does nothing.

  • If I pause my treadmill manually, QZ goes into pause mode. But I cannot restart my treadmill from QZ and if I restart my treadmill manually, QZ does not restart. I have to start a new activity.

  • If I stop a QZ activity, my treadmill continues running (perhaps this is the normal, expected behaviour?).

I've attached an HCI snoof using Horizon's AFG Pro app. I did the following:

  1. Start the treadmill in the AFG Pro app.
  2. Pause the treadmill in the AFG Pro app.
  3. Restart the treadmill in the AFG Pro app.
  4. Pause the treadmill in the AFG Pro app.
  5. Start the treadmill manually.
  6. Pause the treadmill manually.
  7. Start the treadmill manually.
  8. Stop the treadmill in the AFG Pro app.
  9. Start a new activity
  10. Start the treadmill in the AFG Pro app.
  11. Pause the treadmill manually.
  12. Stop the treadmill manually.

Everything worked as expected. However, I realise there are a lot of steps above, so you may need separate logs for the different steps. Please let me know.
btsnoop_hci.log
@hellobensalt hellobensalt added the bug Something isn't working label Apr 22, 2024
@cagnulein
Copy link
Owner

cagnulein commented Apr 22, 2024 via email

@cagnulein
Copy link
Owner

hi @hellobensalt I checked the pause frame used by the AFG app and it's the same that I implemented. Could you please create a debug log from QZ while you are trying to pause and unpause the treadmill from QZ directly?

The "Disable Pause" setting in the horizon treadmill must be disabled.

So follow this:

  • start qz
  • wait a minute for the connection with the treadmill
  • start the treadmill as you usually do with qz
  • try to pause it with qz
  • try to unpause

Let me know
Thanks!

@hellobensalt
Copy link
Author

I'll check later.

But it's not just pausing the treadmill in QZ. The app always starts the treadmill in pause mode. Every time. The General and Horizon Treadmill pause settings do not work. Also, once the treadmill is paused, the treadmill will not restart.

So, there are many issues. I can try to capture a debug log for each one, but I'm not sure what to do about the settings. I can turn them on/off and restart the app, then connect to the treadmill, if that helps?

Anyway, I'll start with what you asked for.

@cagnulein
Copy link
Owner

cagnulein commented Apr 23, 2024 via email

@hellobensalt
Copy link
Author

Here it is:

debug-Fri_Apr_26_17_23_54_2024.log

Sorry for the delay. I'm going to try to look at all this during the next few days.

@cagnulein
Copy link
Owner

cagnulein commented Apr 26, 2024 via email

@hellobensalt
Copy link
Author

Many thanks.

@cagnulein
Copy link
Owner

@hellobensalt i checked your debug log and the main issue of this is that you're pressing the pause/play button in QZ while the treadmill is still initializing.

Consider that your treadmill took at least 1m 30s second to boot up.
Try to wait so 2 minutes (to be sure) and let's try to replicate the issue after this.

Let me know

@stale Stale
Copy link

stale bot commented May 17, 2024

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

@stale stale bot added the wontfix This will not be worked on label May 17, 2024
@stale stale bot closed this as completed May 26, 2024
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@cagnulein cagnulein

Labels
bug Something isn't working wontfix This will not be worked on
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@cagnulein @hellobensalt