2023 Sole E35 compatibility

[realericmc]

I see Sole E25 in the compatibility list, but has anyone used a 2023 Sole E35 elliptical? It looks like the SW in those is fairly different than the older models.

[cagnulein]

hi @realericmc send here a nrfconnect screenshot about your elli and i will check it. nrfconnect is a free app on the store

let me know!

[cagnulein]

@realericmc does your elliptical has a 0.5 step for inclination or only 1% grade?

[realericmc]

It has 20 "levels" and I have not seen any indication that it can increment in half steps. The levels are not equivalent to percent grade though. I couldn't find that in their specs, but I measured it at 2º for level 1 through 15º for level 20.

[cagnulein]

perfect! that's the issue so! set the "Inclination Step:" under the treadmill setting to 1 and i guess it will work on both direction! i'm also doing this in the code for this particular model. Let me know!

[realericmc]

yep, nailed it. Changing that to 1 worked. Thanks!

[cagnulein]

amazing!

[realericmc]

Thanks @cagnulein! I am in the shopping phase so don't have one yet. I will try to find one in a store and get you the screenshot.

[cagnulein]

Thanks I will check it tomorrow Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno gio 21 mar 2024 alle 19:12 Eric McMurry ***@***.***> ha scritto:

…

on version 771- -cadence is reading, but looks to be double. What was sent to swift was double that (so 4x the rpm) -speed is staying zero -odometer is updating at a bit less than 2x what is shown on elliptical -resistance is shown in the app and is updating when changed on the elliptical. The buttons on the tile are not changing it (it briefly changes, then goes back to what the elliptical already had) -inclination is staying zero -HR is showing 0-4 and I can’t correlate it to actual HR -fan speed is not updating when the fan is turned on (no biggie, just for completeness) -power is staying zero debug-Thu_Mar_21_13_03_59_2024.log <https://github.com/cagnulein/qdomyos-zwift/files/14705360/debug-Thu_Mar_21_13_03_59_2024.log> — Reply to this email directly, view it on GitHub <#2195 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWDKZ655ZATGD3T5RK3YZMPJ3AVCNFSM6AAAAABEJ5V24CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DQNRZGU3TE> . You are receiving this because you were mentioned.Message ID: ***@***.*** com>

[realericmc]

Thanks! Sent some coffee to drink while you look at it. Please let me know if there is something else you would like me to try.

…

On Mar 21, 2024, at 13:20, Roberto Viola ***@***.***> wrote: Thanks I will check it tomorrow Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno gio 21 mar 2024 alle 19:12 Eric McMurry ***@***.***> ha scritto: > on version 771- > -cadence is reading, but looks to be double. What was sent to swift was > double that (so 4x the rpm) > -speed is staying zero > -odometer is updating at a bit less than 2x what is shown on elliptical > -resistance is shown in the app and is updating when changed on the > elliptical. > The buttons on the tile are not changing it (it briefly changes, then goes > back to what the elliptical already had) > -inclination is staying zero > -HR is showing 0-4 and I can’t correlate it to actual HR > -fan speed is not updating when the fan is turned on (no biggie, just for > completeness) > -power is staying zero > > debug-Thu_Mar_21_13_03_59_2024.log > <https://github.com/cagnulein/qdomyos-zwift/files/14705360/debug-Thu_Mar_21_13_03_59_2024.log> > > — > Reply to this email directly, view it on GitHub > <#2195 (reply in thread)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AAALYWDKZ655ZATGD3T5RK3YZMPJ3AVCNFSM6AAAAABEJ5V24CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DQNRZGU3TE> > . > You are receiving this because you were mentioned.Message ID: > ***@***.*** > com> > — Reply to this email directly, view it on GitHub <#2195 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJ2NDX7FBVD7GDX5OCRETF3YZMQGVAVCNFSM6AAAAABEJ5V24CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DQNRZGY2DQ>. You are receiving this because you were mentioned.

[realericmc]

That is an easy call :-) Have a great weekend!

…

On Mar 22, 2024, at 09:06, Roberto Viola ***@***.***> wrote: thanks, i will check it ASAP, in the weekend i'm trying to stay with my family otherwise I'm risking a divorce :) — Reply to this email directly, view it on GitHub <#2195 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJ2NDXZADPPZHGIOT6PSYELYZQ3FXAVCNFSM6AAAAABEJ5V24CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DQNZYGY2DC>. You are receiving this because you were mentioned.

[realericmc]

Thanks Roberto! I’ll give that a go when the link comes by. Have a great weekend!

…

On Mar 22, 2024, at 10:00, Roberto Viola ***@***.***> wrote: last version before the weekend. i should have fixed he wattage and the cadence issue inclination should works too hopefully i tried to add the command for the resistance, let's see if it will work — Reply to this email directly, view it on GitHub <#2195 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJ2NDXZ4LN2N6BKSFI6YO2LYZRBSHAVCNFSM6AAAAABEJ5V24CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DQNZZGI3DM>. You are receiving this because you were mentioned.

[cagnulein]

Sent! Have a great weekend too! Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno ven 22 mar 2024 alle ore 16:05 Eric McMurry < ***@***.***> ha scritto:

…

Thanks Roberto! I’ll give that a go when the link comes by. Have a great weekend! > On Mar 22, 2024, at 10:00, Roberto Viola ***@***.***> wrote: > > > last version before the weekend. > > i should have fixed he wattage and the cadence issue > inclination should works too hopefully > i tried to add the command for the resistance, let's see if it will work > — > Reply to this email directly, view it on GitHub < #2195 (reply in thread)>, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AJ2NDXZ4LN2N6BKSFI6YO2LYZRBSHAVCNFSM6AAAAABEJ5V24CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DQNZZGI3DM>. > You are receiving this because you were mentioned. > — Reply to this email directly, view it on GitHub <#2195 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWEJUY37D7CT7SHWHCDYZRCEHAVCNFSM6AAAAABEJ5V24CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DQNZZGMZTO> . You are receiving this because you were mentioned.Message ID: ***@***.*** com>

[cagnulein]

perfect i will check hr tomorrow. why don't use the fan and the rower too? Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno lun 25 mar 2024 alle 19:47 Eric McMurry ***@***.***> ha scritto:

…

Thanks @cagnulein <https://github.com/cagnulein> ! Here is a log. the hr should be in the 70s and 80s. Poking around through the log, the most likely suspect to me is the third byte from the end in the packets. For example, the 4a in this one: Mon Mar 25 13:30:04 2024 1711391404711 Debug: /Users/cagnulein/qdomyos-zwift/src/devices/bluetooth.cpp void bluetooth::debug(const QString &) " << fc 0b 00 00 00 00 30 00 14 00 00 01 00 00 00 05 00 02 00 00 00 00 4a 32 00" Nice to have those features! for me it would still be more convenient though to direct connect with my fan, since I use that same fan with my rower in that fashion. To do it with the app, I would have to repair every time I switch machines since the kickr headwind I have only remembers the last pairing. debug-Mon_Mar_25_13_28_55_2024.log <https://github.com/cagnulein/qdomyos-zwift/files/14748108/debug-Mon_Mar_25_13_28_55_2024.log> — Reply to this email directly, view it on GitHub <#2195 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWAIBVPBRJJETBUQH4LY2BWKXAVCNFSM6AAAAABEJ5V24CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DSMBWGY2DK> . You are receiving this because you were mentioned.Message ID: ***@***.*** com>

[realericmc]

thanks! for the rower I pair the hr strap with it directly (ant), and then pair the rower directly to the exr app. I then use the bt pairing from my hr strap with the fan and run that in hr mode. That works well. If I were to use the qz app with the fan when I am on the elliptical though, I would have to re pair the fan each time I switch between machines, which can be in the same workout.

btw, on the pairing topic, I have been having to do repairing and restarting multiple times each time I come back to the elliptical to get it working with the qz app. I have not figured out yet what combination of things works best yet, but it has consistently not worked after the elliptical has gone to sleep without a minimum of forgetting the pairing.

[cagnulein]

i mean if you use the fan with qz you can connect the fan directly on qz all the time without repairing it each time. for the pairing issue just use the manual device in the advanced setting to set it to your sole device, for sure qz is connecting to the rower too you can use different profiles in the app to connect to one or the other Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno lun 25 mar 2024 alle 19:57 Eric McMurry ***@***.***> ha scritto:

…

thanks! for the rower I pair the hr strap with it directly (ant), and then pair the rower directly to the exr app. I then use the bt pairing from my hr strap with the fan and run that in hr mode. That works well. If I were to use the qz app with the fan when I am on the elliptical though, I would have to re pair the fan each time I switch between machines, which can be in the same workout. btw, on the pairing topic, I have been having to do repairing and restarting multiple times each time I come back to the elliptical to get it working with the qz app. I have not figured out yet what combination of things works best yet, but it has consistently not worked after the elliptical has gone to sleep without a minimum of forgetting the pairing. — Reply to this email directly, view it on GitHub <#2195 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWFR7YROQOKSKOKJDJLY2BXR5AVCNFSM6AAAAABEJ5V24CVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DSMBWG4ZTE> . You are receiving this because you were mentioned.Message ID: ***@***.*** com>

[realericmc]

yep, that would work. If I am just rowing I don't bring my phone though.

I did try the manual device in the advance setting, but I am still having to do multiple restarts and repairings. Perhaps it is an issue with the elliptical

Thanks!