QDomyos-Zwift can be installed from source on MacOs, Linux, Android and IOS.
Once you've installed QDomyos-Zwift, you can access the operation guide for more information.
These instructions build the app itself, not the test project.
$ sudo apt update && sudo apt upgrade # this is very important on raspberry pi: you need the bluetooth firmware updated!
$ sudo apt install git qtquickcontrols2-5-dev libqt5bluetooth5 libqt5widgets5 libqt5positioning5 libqt5xml5 qtconnectivity5-dev qtpositioning5-dev libqt5charts5-dev libqt5charts5 qt5-assistant libqt5networkauth5-dev libqt5websockets5-dev qml-module* libqt5texttospeech5-dev libqt5texttospeech5 libqt5location5-plugins qtlocation5-dev qtmultimedia5-dev libqt5multimediawidgets5 libqt5multimedia5-plugins libqt5multimedia5 g++ make
$ git clone https://github.com/cagnulein/qdomyos-zwift.git
$ cd qdomyos-zwift
$ git submodule update --init src/smtpclient/
$ git submodule update --init src/qmdnsengine/
$ git submodule update --init tst/googletest/
$ cd src
$ qmake qdomyos-zwift.pro
$ make -j4
$ sudo ./qdomyos-zwift
You will need to (at a minimum) to install the xcode Command Line Tools (CLI) thanks to @richardwait https://developer.apple.com/download/more/?=xcode
Download and install https://download.qt.io/archive/qt/5.12/5.12.12/qt-opensource-mac-x64-5.12.12.dmg and simply run the qdomyos-zwift release for MacOs
This guide will walk you through steps to setup an autonomous, headless raspberry bridge.
You can install a lightweight version of embedded OS to speed up your raspberry booting time.
Get the latest Raspberry Pi Imager and install, on a SD card, the Raspberry lite OS version.
Boot on the raspberry (default credentials are pi/raspberry)
sudo raspi-config > Password
sudo raspi-config
System Options > Wireless LAN
Enter an SSID and your wifi password.
Your raspberry will fetch a DHCP address at boot time, which can be painful :
- The IP address might change at every boot
- This process takes approximately 10 seconds at boot time.
It is recommended to set a fixed IP address
Edit /etc/dhcpcd.conf and insert the following content with your configuration.
# Example static IP configuration:
interface wlan0
static ip_address=192.168.1.99/24
static routers=192.168.1.1
static domain_name_servers=192.168.1.1 8.8.8.8 Apply the changes sudo systemctl restart dhcpcd.service and ensure you have internet access.
You might want to access your raspberry remotely while it is attached to your fitness equipment.
sudo raspi-config > Interface Options > SSH
This option allows a faster boot. sudo raspi-config > System Options > Network at boot > No
Reboot your raspberry sudo reboot now
Congratulations !
Your raspberry should be reachable from your local network via SSH.
Before installing qdomyos-zwift, let's ensure we have an up-to-date system.
sudo apt-get update
sudo apt-get upgrade
This operation takes a moment to complete.
sudo apt install git libqt5bluetooth5 libqt5widgets5 libqt5positioning5 libqt5xml5 qtconnectivity5-dev qtpositioning5-dev libqt5charts5-dev libqt5charts5 qt5-assistant libqt5networkauth5-dev libqt5websockets5-dev qtmultimedia5-dev libqt5multimediawidgets5 libqt5multimedia5-plugins libqt5multimedia5 qtlocation5-dev qtquickcontrols2-5-dev libqt5texttospeech5-dev libqt5texttospeech5 g++ make
git clone https://github.com/cagnulein/qdomyos-zwift.git
cd qdomyos-zwift
git submodule update --init src/smtpclient/
git submodule update --init src/qmdnsengine/
git submodule update --init tst/googletest/
cd src
qmake qdomyos-zwift.pro
make Please note :
- Don't build the application with
-j4option (this will fail) - Build operation is circa 45 minutes (subsequent builds are faster)
It is now time to check everything's fine
./qdomyos-zwift -no-gui -heart-service
Test your access from your fitness device.
You might want to have QDOMYOS-ZWIFT to start automatically at boot time.
Let's create a systemd service that we'll enable at boot sequence.
sudo vi /lib/systemd/system/qz.service
[Unit]
Description=qdomyos-zwift service
After=multi-user.target
[Service]
Type=idle
Restart=always
RestartSec=30
ExecStart=/home/pi/qdomyos-zwift/src/qdomyos-zwift -no-gui -no-log -heart-service
ExecStop=killall -9 qdomyos-zwift
User=root
[Install]
WantedBy=multi-user.target
Once your file saved, you need to reload the active systemd configuration.
sudo systemctl daemon-reload
Test your service to check if everything's fine :
sudo systemctl start qz
Check if your system is stopping correctly :
sudo systemctl stop qz
If everything is working as expected, enable your service at boot time :
sudo systemctl enable qz
Then reboot to check operations (sudo reboot)
Once that everything is working as expected, and if you dedicate your Raspberry pi to this usage, you might want to enable the read-only overlay FS.
By enabling the overlay read-only system, your SD card will be read-only only and every file written will be to RAM. Then at each reboot the RAM is erased and you'll revert to the initial status of the overlay file-system.
Why doing that ?
- Your SD card will not suffer any write operation and will life longer.
- The risk of corruption of your FS is reduced (in case of unproper shutdown in example)
- This operation is reversible.
ATTENTION
After enabling the overlay filesystem any change on your SDCard will become a temporary change.
In the case you need to update qdomyos-zwift (in example), you'll need to disable the overlay filesystem first.
sudo raspi-config > Performance > Overlay File system
"Would you like the overlay filesystem to be enabled ?" YES.
"Would you like the boot partition to be read-only ?" YES.
Reboot immediately.
I use some 3m magic scratches to attach my raspberry to my bike. I use the USB port from the bike console (always powered as long as the bike is plugged to main), maximum power is 500mA and this is enough for the raspberry.
You can easily remove the raspberry pi from the bike if required.