OctoRelay

The plugin adds buttons to control GPIO pins of Raspberry Pi for switching relays and indicating their states.

In this screenshot, the black printer icon shows the ON state of its relay, and the gray ones indicate OFF. The plugin allows you to set your own icons and flexibly customize the way the relay states are displayed.

I use it with a 4 relay board, and printed this case for it. Just hooked up the GPIO pins with the relay board, and now I can turn the power of the printer, the fan and the light on and off with OctoPrint.

This plugin was based on the OctoLight Plugin by Žiga Kralj, thanks ;-)

— Boris Burgstaller

Requirements

• Python: at least 3.7,
• OctoPrint: at least 1.5.3.
  • For AutoConnect feature: at least 1.9.0.

Setup

Install via the bundled Plugin Manager or manually using this URL:

https://github.com/borisbu/OctoRelay/releases/latest/download/release.zip

In case you want to enable the plugin for user groups other than admins and users (operators), you need to grant them the permission "Relay switching" in the "Access control" section of OctoPrint settings.

After installing the plugin you need to configure it in order to see the control buttons in the navigation bar.

Configuration

Currently, OctoRelay supports up to 8 relays represented by the tabs on the top of the settings screen. Each relay has the following settings (in order of appearance):

Setting	Description
Active	Activates the relay control and indication on the navigation bar
Label	The relay description to show on tooltip and in dialogs
Icon ON / OFF	An image or emoji to indicate the relay state (supports HTML)
This is printer relay	Closes the printer connection when turning this relay OFF
AutoConnect delay	Printer relay feature adjustment when turning it ON
GPIO Number	The GPIO pin on the Raspberry Pi
Inverted output	For normally closed relay: the relay is ON without power
Confirm turning OFF	Enables a confirmation dialog when turning the relay OFF
Alert on switches ahead	Notifies on upcoming switch with an ability to cancel it
Events:	Behavior customization (automation)
on Startup	The state to switch the relay to when OctoPrint started
on Printing Started	The state to switch the relay to when started printing
on Printing Stopped	The state to switch the relay to when stopped printing
after Turned ON	The state to switch the relay to after it has been turned ON
skip (option)	No action should be taken
delay	Postpones the action for the time specified in seconds
Side effects:	Additional actions in certain cases
Command ON / OFF	An optional OS command to run when toggling the relay

Operation

You can toggle the relays ON and OFF the following ways:

• By clicking the control buttons on the navigation bar.
  • The icon you choose for the button will display the current state.
• By sending GCODE command @OCTORELAY r# [ON|OFF].
  • Where # is relay index from 1 to 8;
  • While [ON|OFF] is an optional target.
• Or by querying the API (see below).

OctoRelay API

Relays can be queried and updated through the OctoPrint API. Read that documentation on how to get an API Key.

Change the relay state

This query turns the relay r1 OFF:

curl 'http://octopi.local/api/plugin/octorelay' \
  -H 'X-Api-Key: YOUR_API_KEY' \
  -H 'Content-Type: application/json' \
  -X POST \
  -d '{ "command": "update", "subject": "r1", "target": false }'

# Sample response:
# {
#   "status": false
# }

The target entry in request payload is an optional boolean parameter. When it's null or omitted the relay will toggle. The status entry in the response payload reflects the relay state as the outcome of the request.

Request the relay state

This query provides the status or the relay r1:

curl 'http://octopi.local/api/plugin/octorelay' \
  -H 'X-Api-Key: YOUR_API_KEY' \
  -H 'Content-Type: application/json' \
  -X POST \
  -d '{ "command": "getStatus", "subject": "r1" }'

# Sample response:
# {
#   "status": true
# }

List all the relay states

This query provides the statuses of all the relays:

curl 'http://octopi.local/api/plugin/octorelay' \
  -H 'X-Api-Key: YOUR_API_KEY' \
  -H 'Content-Type: application/json' \
  -X POST \
  -d '{ "command": "listAllStatus" }'

# Sample response:
# [
#   {
#     "status": true,
#     "id": "r1",
#     "name": "Light"
#   },
#   {
#     "status": false,
#     "id": "r2",
#     "name": "Printer"
#   }
# ]

The status entry reflects the actual state of the relay.

Updates

Check out the versions, their features and bug fixes in the Changelog.