BWS VPS Masternode 1-Click setup script.

USe this script to install BWS masternode with convenience. This script will install the required components on VPS. While you still have to configure local BWS wallet to configure and start the masternode.

Masternode Basic Requirements

• 50,000 BWS

• Main Computer with BWS wallet installed

• Masternode Server

• A VPS account with a unique IP address for EACH masternode. It has been tesed with VULTR $5 Ubuntu 16.04 x64 server. You can choose any other VPS provider of your choice.

• Login to you VPS and run this command - wget https://github.com/bitcoinwspectrum/mn_install/releases/download/5/Bws_Setup.sh && chmod 755 Bws_Setup.sh && ./Bws_Setup.sh

• Using your main wallet, enter the debug console and type the following command:

• masternode genkey

-Record the output as you will need to proivde this at the end of VPS setup.

Local Wallet Procedure

Step 1) Download, install and sync your BWS wallet Download link for all Operating systems: https://github.com/raymaker/bitcoinwspectrum/releases

Step 2) Using your main wallet, enter the debug console and type the following command:

• masternode genkey

• Please save this on a Notepad

Step 3) Using your main wallet, enter the debug console and type the following command:

• getaccountaddress INSERT_MASTERNODE_NAME

• Please save this on a Notepad

Step 4) Send 50,000 BWS to Step 3 address.

Step 5) Using your main wallet, wait for 15 confirmations, and then enter the debug console and type the following command:

• masternode outputs
• Please save this on a Notepad 

Step 6) Locate your masternode.conf and add the following line:

<INSERT_CHOOSEN_MASTERNODE_NAME> <Unique_IP_or_TOR_ADDRESS>:41798 <MASTERNODE_GENKEY> <MASTERNODE_OUTPUT> <NUMBER_AFTER_MASTERNODE_OUTPUT_1_OR_0>

Note: Substitute it with your own values and without the “<>”s

Example: MN1 31.11.135.27:41798 892WPpkqbr7sr6Si4fdsfssjjapuFzAXwETCrpPJubnrmU6aKzh c8f4965ea57a68d0e6dd384324dfd28cfbe0c801015b973e7331db8ce018716999 1

Run and follow the instructions on the script

Linux CLI:

Command: ./bws-cli stop then: ./bwsd -reindex

Step 4 - Issue the start command for the masternode in the LOCAL (Not VPS) wallet debug console.

For example: startmasternode alias 0 MN01

Note: Where by MN01 is your chosen Masternode name Wait a few minutes for the MN ip address to change to the onion address in the masternode tab.

Step 5 - Restart the wallet on the VPS with the following commands.

Command: ./bws-cli stop

then: ./bwsd -reindex

Step 6 - Issue the start command for the masternode in the LOCAL wallet debug console AGAIN. ie follow step 4 again.

Step 7 - Wait up to 30 minutes for the MN timer to change from 00:00 to a postive time in the masternode tab.

Note: You can check to see if it updated to the onion address in the VPS using: ./bws-cli masternode status

Like this? Show your love for BWS by supporting BWS development

BWS

CmPSmZv9FYmkduCNXJa7A8QFmgaTbrrtu5

BTC

17gWaVCVrDcZwTtX9ejH8zncsYt9yN6YsY