BIP 388: Wallet Policies for Descriptor Wallets #1389

bigspider · 2022-11-16T15:34:23Z

Initial version posted to bitcoin-dev in May.

Wallet policies are implemented in the Ledger bitcoin app (since version 2.1.0).

The following PR experimenting with an HWI integration might provide more context and an end-to-end demo:

[PoC] Wallet policies (and miniscript support) bitcoin-core/HWI#647

darosior

Good to see progress on this! Just a small comment about only mentioning Bitcoin Core: i know of several projects using descriptors, and even more of them using descriptors without Miniscript.

bip-wallet-policies.mediawiki

darosior · 2022-11-30T09:55:19Z

bip-wallet-policies.mediawiki

+
+A more native, compact representation of the wallet receive/change might also benefit the UX of software wallets using descriptors to represent software wallets using descriptors (possibly with miniscript) for complex locking conditions.
+
+We remark that wallet policies are not related to the ''policy'' language, a higher level language that can be compiled to miniscript.


Still open to suggestions for a less-ambiguous name!

If the suggestions below to reduce/remove malleability are taken, I'd suggest wallet patterns as these strings describe the pattern of derivation without including the keys.

I am wondering if signing policy/pattern as a name can be useful too. Thinking of constraining outputs to spend to a predefined wallet, which isn't necessarily the wallet that is being spend from.

For example a policy that only allows spending to cold storage addresses derived from a pre-registered xpub.

bigspider · 2023-01-24T09:25:35Z

In dfa2645, I added the possibility of using unhardened derivation steps in the key origin information (while keeping the restriction for change/address_index in the key placeholders).
While most wallets use hardened derivations for all but the last two steps, there are deployed use cases with unhardened derivations, and this only adds negligible implementation complexity to wallet policies.

@n

Policies are simply a restriction on the general variable substitution mechanism that wally already supports; (a) the variables can only be of the form @n where n is an integer, and (b) the substitution data must be an xpub. See bitcoin/bips#1389 WIP: Requires tests and documentation (and the BIP to be accepted).

@n

Policies are simply a restriction on the general variable substitution mechanism that wally already supports; (a) the variables can only be of the form @n where n is an integer, and (b) the substitution data must be an xpub. See bitcoin/bips#1389 WIP: Requires tests and documentation (and the BIP to be accepted).

bip-wallet-policies.mediawiki

jgriffiths · 2023-02-13T11:40:47Z

bip-wallet-policies.mediawiki

+
+TODO: reference BIP-389 for multipath descriptors (not yet merged into the bips repository at time of writing).
+
+The <tt>/**</tt> in the placeholder template represents commonly used paths for receive/change addresses, and is equivalent to <tt><0;1>/*</tt>.


While /** is shorter, it also looks to be easy to mistype/confuse with /*. Compare with something like /+ or /++ for example.

I prefer /** as it has a similar meaning in other languages (and was used in BIP-0129 for almost the same meaning).

As the /* alone is invalid for wallet policies, I don't see the risk of confusing it as very dangerous.

It's been pointed out in the past that /** is redundant since the /<M;N>/* expression is already more general, but in practice my expectation is that the vast majority of the use cases will just be happy with using /** for all the key expressions (which makes it a lot easier to inspect).
Complex taproot scripts with many leaves might find the /<M;N>/* notation more interesting, perhaps.

Ah, that's fair enough, I wasn't aware of BIP-0129. I'm OK with /** in that case. Given that:

It's been pointed out in the past that /** is redundant since the /<M;N>/* expression is already more general

I think you should disallow <0;1>/* within wallet policies and require they be expressed as /**. Can't recall if that's already the case.

In fact I think you should go further and mandate the hardened indicator be only ' (or 'h, but only one or the other) in wallet policies. At the moment, the primary source of descriptor malleability (two textually different descriptors that describe the same thing, but have different checksums) is the key paths (plus no lexicographical sorting in the source sortedmulti key expression order). Given that you are replacing the keys with @n and enforcing monotonic numbering from left to right, doing the above will make it much simpler to identify standard policies/templates by not requiring all possible variants to be stored and compared. What do you think?

edit: Forgot about multi-path. You need additionally to state that multi-path extensions of length 3 and greater must be sorted in numerical order.

Mandating ' instead of h sounds good to me, but completely fixing malleability is probably a lost battle.
For example, impossible to make sure are not reused if descriptors are different because of multi/sortedmulti, as you pointed out. More crucially, you might or might not know the key origin info of some external xpub (although this is only within the key info vector, not in the descriptor template).

I'm not sure about disallowing the /<M;N>/* notation; for one thing, it's already adopted for descriptors and used in many multisig wallets. Moreover, I suspect using <M;N> other than 0;1 will have use cases: you might have the same root xpub in different spending conditions, but using different values for M;N. One use case might be delegation: or(and(Alice1,Bob),and(Alice2,Carl)): Alice might want to allow Bob to sign, but not Carl, so she only signs with Alice1. If only the /** notations is present, then the only option for Alice is to use two different xpubs; instead, one could have or(and(Alice/<0;1>/*,Bob),and(Alice/<2;3>/*, Carl)) and have a single xpub for Alice.

but completely fixing malleability is probably a lost battle.

Agreed, it wasn't baked in at the start and can't be reliably added now. My goal is just to make sure that the common cases are all represented with the same pattern as much as possible.

I'm not sure about disallowing the /<M;N>/* notation

To be clear, I'm only suggesting this when M=0 and N=1, not in the general case! its just a simple text substitution much as the hardening indicator would be, that would go a long way to making common patterns trivially identifiable. Agreed that there are use cases for other values here.

jgriffiths · 2023-02-13T11:47:25Z

bip-wallet-policies.mediawiki

+
+=== Implementation guidelines ===
+
+Implementations must not necessarily implement all the possible wallet policies defined by this standard, but it is recommended to clearly document any limitation.


Would it not be better to avoid listing the miniscript/descriptor elements that are supported, and just define this bip in terms of :

A change to bip32 KEY expressions against miniscript/descriptors; they must be replaced with @ placeholders

Non-bip32 keys (e.g. raw and private keys) are not allowed (not sure if this is specified here)

/** (or /+ or whatever is decided on) is used for <0;1>/*, and presumably multi-path is disallowed elsewhere.

Given that implementations may only support a subset of elements, you might as well open it up to future elements and avoid needing to update this bip.

That's an option, indeed.

I opted for a bottom-up definition (explicitly whitelisting the parts of the descriptor language that we adopt) because there are some inherent incompatibilities, plus it is hard to predict if more will come in the future. For example:

The combo descriptor seems inherently not fitting for wallet policies

Likewise, extensions like this would have to be "blacklisted" explicitly

On the other hand, the bottom-up approach leaves the exact spec for miniscript descriptors templates in the air, until there is no corresponding BIP...

Yeah, we have to hope that at some point we stop shoe-horning in descriptor extensions for obsolete cases. Doing so makes a complete implementation prohibitively difficult, makes universal descriptor support less likely, and disincentivizes the eventual/priority movement of coins to modern UTXO/key derivation schemes.

combo, and the linked extension both have in common that they change the cardinality of the solved descriptor. I think you could get the benefit of forward compatibility for this BIP by just stating that final wildcards and multi-path are the only supported key expressions that change cardinality, and all others are forbidden. Then any future extensions to the path syntax, and any expression fragments that return multiple variants would automatically be excluded.

My understanding is that the plan is for extending descriptors liberally, but then implementations can choose which subset to implement. So the bottom-up approach is imho more likely to stay well-defined (but it's certainly more work and will need updates in the future).

I'll leave the approach here to your judgement, since there are arguments for both sides. My view is that descriptors become less useful the more incompatible implementations there are. In wally I'm likely just going to accept anything that looks like a correct pattern as long as it parses and doesn't change the cardinality when solved (assuming this BIP is accepted).

bip-wallet-policies.mediawiki

bigspider · 2023-02-21T08:55:05Z

Thanks @jgriffiths and @bucko13 for the reviews!
I addressed most of the comments in da3e117.

In bb98f80 I deleted the examples coming from HTLC miniscripts; they don't quite make sense as wallet policies.

joostjager · 2023-05-02T14:54:22Z

bip-wallet-policies.mediawiki

+
+* replacing each key placeholder with the corresponding key origin
+information;
+* replacing every <tt>/**</tt> with <tt>/<0;1>/*</tt>.


Could an alternative to using the /** suffix be to separate define the wallet policies for the inputs and outputs? The input policy can then specify /0/* and the output policy /1/*. Both would still reference the same entry in the key info vector. The added flexibility may also be useful to constrain outputs to a known-but-different wallet.

Maybe I am misunderstanding you, but: inputs can be /0/* or /1/* (changes can be spent too)

joostjager · 2023-05-02T15:02:34Z

bip-wallet-policies.mediawiki

+** Exactly 8 hex characters for the fingerprint of the master key from which this key is derived from (see [[bip-0032.mediawiki|BIP-32]] for details)
+** Followed by zero or more <tt>/NUM'</tt> or <tt>/NUM</tt> path elements to indicate hardened or unhardened derivation steps between the fingerprint and the xpub that follows
+** A closing bracket <tt>]</tt>
+* Followed by the actual key, which is a serialized extended public key (as defined in [[bip-0032.mediawiki|BIP-32]]).


Echoing the discussion in LedgerHQ/app-bitcoin-new#153:

It would be great if a wallet policy can support 2-of-2 multisig transactions where one of the keys is ephemeral (completely random). This is useful when using presigned transactions to simulate covenants, for example to implement time-locked vaults.

benma · 2023-06-13T08:49:08Z

bip-wallet-policies.mediawiki

+== Test Vectors ==
+
+[[bip-0044.mediawiki|BIP-44]], first account
+ Descriptor template: pkh(@0)


The spec above says that the @N must always be followed by /** or /<NUM:NUM>/*, but some examples and test vectors don't have that suffix.

followed by a non-negative decimal number, with no leading zeros (except for <tt>@0</tt>) * ''always'' followed by either: ** the string <tt>/**</tt>, or ...

Is @0 the same as @0/**? Would be good to fix either the specification or the examples/test vectors.

We have to also allow /* following @n (i.e. a single asterisk instead of two), since not all wallets use 0/1 paths to differentiate change addresses.

I'm OK with @n alone expanding to @0/** but this does add even more malleability to expressions. Regardless, the always section should be updated to allow single asterisks.

The naked @N was an oversight, I don't think it should be allowed as it would be confusing (Ledger's implementation doesn't permit it). I will fix it.

--

If we generalize the suffix to expressions other than <0;1>/*, then we have to make sure that no pubkey is repeated.
In practice, for /*, that would mean that all the placeholders must be followed by the exact suffix /*.

Out of curiosity, what software wallets use that scheme?

If we generalize the suffix to expressions other than <0;1>/*

I'm not sure I follow. I'm not suggesting generalizing the suffix, at least in the sense of allowing general path expressions to be used as suffixes. I'm saying the only key expression suffixes that should be allowed are /**, /<m;n>/* and /*.

If we generalize the suffix to expressions other than <0;1>/*, then we have to make sure that no pubkey is repeated.

I assume you mean here that a key expression could be given as [/a/b/c]foo/** and then elsewhere as [/a/b/c/0]bar/* and/or [/a/b/c/1]bar/* giving rise to the same derived keys with different key identifiers.

In practice, for /, that would mean that all the placeholders must be followed by the exact suffix /

For a given key expression, yes. I'm fine with supporting /* being optional, and if present the implementation must ensure this.

Note also that at present this BIP does not state that implementations must ensure that KP expressions refer to distinct keys when substituting them into a policy, although that appears to be a requirement. I think it would also be clearer to state that all key expressions in a policy must be replaced by KP expressions (i.e. that no non-KP keys are allowed).

Also missing are that <m;n> expressions should be numerically sorted, and that explicit <0;1> should be disallowed.

I'm happy to make individual commits with suggested changes for the above for you to review/cherry-pick. Should I create a PR against your repo for this?.

Out of curiosity, what software wallets use that scheme?

Blockstream Green multisig wallets do not use bip44 style paths (the wallet predates the BIP). Also descriptors themselves do not enforce bip44 derivation.

I'm not sure I follow. I'm not suggesting generalizing the suffix, at least in the sense of allowing general path expressions to be used as suffixes. I'm saying the only key expression suffixes that should be allowed are /**, /<m;n>/* and /*.

What I mean is that if we allow mixing things like @0/* with @1/<m;n>/*, then we for the xpub of @1 we would need to derive @1/m and @1/n and compare with the pubkey of the xpub in @0, which is quite expensive on a hardware wallet.

With no mixing, for any two placeholders like @0/<m;n>/* and @0/<p;q>/*, I can just check that the sets {m, n} and {p, q} are disjoint.

For a given key expression, yes. I'm fine with supporting /* being optional, and if present the implementation must ensure this.

Not just for a given key expression, I mean it across the entire wallet policy. That is, either the KPs all end with /*, or they all end with some /<NUM;NUM>/*.

Note also that at present this BIP does not state that implementations must ensure that KP expressions refer to distinct keys when substituting them into a policy, although that appears to be a requirement.

Good point, worth adding explicitly the "Additional rules", with the motivation that it's required in miniscript (and it's simpler to add this restriction globally, rather than on the individual miniscript parts of the policy).

So basically:

all the public keys (deserialized from the corresponding xpubs in the keys information vector) must be distinct

all the derivations in each KP expression referring to the same index in the keys information vector must be distinct

In order to allow optional extensions like /*, perhaps I could mention that possibility in a separate section?

I think it would also be clearer to state that all key expressions in a policy must be replaced by KP expressions (i.e. that no non-KP keys are allowed).

A wallet policy is the pair (descriptor_template, keys_information_vector), so not sure what you mean here. The grammar seems to specify exactly what are the allowed KP and KEY expressions, as far as I can tell.

Also missing are that <m;n> expressions should be numerically sorted, and that explicit <0;1> should be disallowed.

I like suggesting to sort <m;n> numerically, but not sure about disallowing <0;1>. I expect people to prefer not mixing @0/** with @0/<2;3>/*, as it's more explicit in that case to just write @0/<0;1>/*.

I'm happy to make individual commits with suggested changes for the above for you to review/cherry-pick. Should I create a PR against your repo for this?.

Sure, feel free to propose changes, but I'll try to incorporate the comments now. I'm also hoping to find the time for a general pass over the whole document to improve the Motivation section, as that was written before the BtcPrague meeting and it can surely be improved in hindsight.

Agreed, this ship along with other malleability concerns has unfortunately sailed. Although it would be nice to enforce ' rather than h for hardening in policies at least, @bigspider?

I agree; Ledger's implementation only allows ' (choice mostly because it looks better on a small screen).
The current specs indeed don't mention h.

I'll go over the other comments (and add the failure cases, thanks!) next week.

4b1f826 should address all the remaining comments from this thread, thanks @jgriffiths!

Suggested invalid test vectors:

sh(multi(1,@0/<0;1>/*,@1/<1;2>/*)) Non-disjoint multipath expressions

This is actually valid as @0 and @1 are independent; added an example where both are @0 instead.

For the miniscript reference, I suppose https://bitcoin.sipa.be/miniscript/ is the only one, although the mention of separate keys is quite buried in the page in the section on malleability.

@bigspider Thanks!

The wally implementation (ElementsProject/libwally-core#369) is now complete and is being tested for addition to Jade. Once merged it would be good to add to the implementations section. At this stage it looks like this BIP has support in 3 HWW so getting a BIP number assigned should not be an issue.

It would be good IMO to squash all commits at this stage. I'll do a final review following wally code review and Jade testing. Many thanks for your responsiveness in addressing review comments.

FYI policy support has been merged into wally now and support in Jade is now being tested.

We will support miniscript as part of output descriptors. Descriptors are an expression language to specify Bitcoin outputs. For example, `wsh(multi(2,<pubkey1>,<pubkey2>,<pubkey3>))` is a 2-of-3 multisig wrapped in a P2WSH (pay-to-witness-script-hash) output. Descriptors specification: https://github.com/bitcoin/bitcoin/blob/8f402710371a40c5777dc3f9c4ba6ca8505a2f90/doc/descriptors.md In fragments wrapping SCRIPT expressions, SCRIPT can also be a miniscript expression, for example: `wsh(or_b(pk(<pubkey1>),s:pk(<pubkey2>)))`. With hardware signers, we want to use xpubs with derivations instead of raw pubkeys, and also have a shorter representation than inlining the xpubs for readability. That is why we will follow the 'Wallet Policies for Descriptor Wallets' proposal specied here: https://github.com/bigspider/bips/blob/bip-wallet-policies/bip-wallet-policies.mediawiki (bitcoin/bips#1389). The above example then become `wsh(or_b(pk(@0/**),s:pk(@1/**)))`. The `@NUM` references a key provided in the keys list. For the policy with the keys, one can then derive pkScripts for receive and change addresses and use these to create addresses.

@0

We add a policies.rs file with functions to parse and validate a policy containing miniscript. Policy specification: bitcoin/bips#1389 We only support `wsh(<miniscript>)` policies for now. Taproot or other policy fragments could be added in the future. More validation checks are coming in later commits, such as: - At least one key must be ours - No duplicate keys possible in the policy - No duplicate keys in the keys list - All keys in the keys list are used, and all key references (@0, ...) are valid. - ...? Also coming in later commits: - Derive a pkScript at a keypath, generate receive address from that - Policy registration (very similar to how multisig registration works today) - Signing transactions

@0

We add a policies.rs file with functions to parse and validate a policy containing miniscript. Policy specification: bitcoin/bips#1389 We only support `wsh(<miniscript>)` policies for now. Taproot or other policy fragments could be added in the future. More validation checks are coming in later commits, such as: - At least one key must be ours - No duplicate keys possible in the policy - No duplicate keys in the keys list - All keys in the keys list are used, and all key references (@0, ...) are valid. - ...? Also coming in later commits: - Derive a pkScript at a keypath, generate receive address from that - Policy registration (very similar to how multisig registration works today) - Signing transactions

@0

We add a policies.rs file with functions to parse and validate a policy containing miniscript. Policy specification: bitcoin/bips#1389 We only support `wsh(<miniscript>)` policies for now. Taproot or other policy fragments could be added in the future. More validation checks are coming in later commits, such as: - At least one key must be ours - No duplicate keys possible in the policy - No duplicate keys in the keys list - All keys in the keys list are used, and all key references (@0, ...) are valid. - ...? Also coming in later commits: - Derive a pkScript at a keypath, generate receive address from that - Policy registration (very similar to how multisig registration works today) - Signing transactions

@0

We add a policies.rs file with functions to parse and validate a policy containing miniscript. Policy specification: bitcoin/bips#1389 We only support `wsh(<miniscript>)` policies for now. Taproot or other policy fragments could be added in the future. More validation checks are coming in later commits, such as: - At least one key must be ours - No duplicate keys possible in the policy - No duplicate keys in the keys list - All keys in the keys list are used, and all key references (@0, ...) are valid. - ...? Also coming in later commits: - Derive a pkScript at a keypath, generate receive address from that - Policy registration (very similar to how multisig registration works today) - Signing transactions

We will support miniscript as part of output descriptors. Descriptors are an expression language to specify Bitcoin outputs. For example, `wsh(multi(2,<pubkey1>,<pubkey2>,<pubkey3>))` is a 2-of-3 multisig wrapped in a P2WSH (pay-to-witness-script-hash) output. Descriptors specification: https://github.com/bitcoin/bitcoin/blob/8f402710371a40c5777dc3f9c4ba6ca8505a2f90/doc/descriptors.md In fragments wrapping SCRIPT expressions, SCRIPT can also be a miniscript expression, for example: `wsh(or_b(pk(<pubkey1>),s:pk(<pubkey2>)))`. With hardware signers, we want to use xpubs with derivations instead of raw pubkeys, and also have a shorter representation than inlining the xpubs for readability. That is why we will follow the 'Wallet Policies for Descriptor Wallets' proposal specied here: https://github.com/bigspider/bips/blob/bip-wallet-policies/bip-wallet-policies.mediawiki (bitcoin/bips#1389). The above example then become `wsh(or_b(pk(@0/**),s:pk(@1/**)))`. The `@NUM` references a key provided in the keys list. For the policy with the keys, one can then derive pkScripts for receive and change addresses and use these to create addresses.

@0

We add a policies.rs file with functions to parse and validate a policy containing miniscript. Policy specification: bitcoin/bips#1389 We only support `wsh(<miniscript>)` policies for now. Taproot or other policy fragments could be added in the future. More validation checks are coming in later commits, such as: - At least one key must be ours - No duplicate keys possible in the policy - No duplicate keys in the keys list - All keys in the keys list are used, and all key references (@0, ...) are valid. - ...? Also coming in later commits: - Derive a pkScript at a keypath, generate receive address from that - Policy registration (very similar to how multisig registration works today) - Signing transactions

@0

We add a policies.rs file with functions to parse and validate a policy containing miniscript. Policy specification: bitcoin/bips#1389 We only support `wsh(<miniscript>)` policies for now. Taproot or other policy fragments could be added in the future. More validation checks are coming in later commits, such as: - At least one key must be ours - No duplicate keys possible in the policy - No duplicate keys in the keys list - All keys in the keys list are used, and all key references (@0, ...) are valid. - ...? Also coming in later commits: - Derive a pkScript at a keypath, generate receive address from that - Policy registration (very similar to how multisig registration works today) - Signing transactions

We will support miniscript as part of output descriptors. Descriptors are an expression language to specify Bitcoin outputs. For example, `wsh(multi(2,<pubkey1>,<pubkey2>,<pubkey3>))` is a 2-of-3 multisig wrapped in a P2WSH (pay-to-witness-script-hash) output. Descriptors specification: https://github.com/bitcoin/bitcoin/blob/8f402710371a40c5777dc3f9c4ba6ca8505a2f90/doc/descriptors.md In fragments wrapping SCRIPT expressions, SCRIPT can also be a miniscript expression, for example: `wsh(or_b(pk(<pubkey1>),s:pk(<pubkey2>)))`. With hardware signers, we want to use xpubs with derivations instead of raw pubkeys, and also have a shorter representation than inlining the xpubs for readability. That is why we will follow the 'Wallet Policies for Descriptor Wallets' proposal specied here: https://github.com/bigspider/bips/blob/bip-wallet-policies/bip-wallet-policies.mediawiki (bitcoin/bips#1389). The above example then become `wsh(or_b(pk(@0/**),s:pk(@1/**)))`. The `@NUM` references a key provided in the keys list. For the policy with the keys, one can then derive pkScripts for receive and change addresses and use these to create addresses.

@0

We add a policies.rs file with functions to parse and validate a policy containing miniscript. Policy specification: bitcoin/bips#1389 We only support `wsh(<miniscript>)` policies for now. Taproot or other policy fragments could be added in the future. More validation checks are coming in later commits, such as: - At least one key must be ours - No duplicate keys possible in the policy - No duplicate keys in the keys list - All keys in the keys list are used, and all key references (@0, ...) are valid. - ...? Also coming in later commits: - Derive a pkScript at a keypath, generate receive address from that - Policy registration (very similar to how multisig registration works today) - Signing transactions

darosior · 2023-08-09T16:27:39Z

@luke-jr can this be assigned a BIP number?

@n

See bitcoin/bips#1389 Policies are a restriction on the general variable substitution mechanism that wally already supports, combined with a shorthand notation for path derivation. 1 - Key variables can only be named @n where n is an integer 2 - Key variable names must increase sequentially from 0 to n 3 - Key variables names must be followed by '/*', '/**', or '/<m;n>/*' 4 - Key variables can only be serialized BIP32 public keys without paths 5 - All key expressions to substitute must be unique 6 - Al least one key expression must be present 7 - Key variables must appear in the policy in order from 0 to n (back-references are allowed for repeated keys) 8 - All key expressions in a policy must be in the form of Key variables 9 - All key expression must share the same solved cardinality (keys using '/*', cannot be mixed with those using '/**' or '/<m;n>/*') 10 - The solved cardinality of a policy must be 1 or 2 (e.g. no combo())`. 11 - All repeated references to the same key must use distinct derivations. This initial change implements and tests points 1-4. This implementation will ignore the whitelisted expression lists given in the BIP, and instead accept any valid descriptor that doesn't have a solved cardinality greater than 2. See the above linked github PR discussion for the rationale behind this decision.

luke-jr

Assigned BIP 388

bip-wallet-policies.mediawiki

bigspider · 2024-01-08T10:51:56Z

I squashed the history, rebased and updated BIP number and type in ~~3bb2cfe~~ d4c650b.

bigspider · 2024-02-05T16:21:55Z

@luke-jr, is there any other further change that I missed?

Otherwise, it would be great to have this merged so I can start linking to it in docs.

darosior · 2024-04-02T13:59:25Z

@luke-jr could you merge this when you've got a minute?

murchandamus

This looks ready for merge to me, although I have a few nits that you might want to address.

ACK d4c650b

bip-0388.mediawiki

murchandamus · 2024-04-22T19:19:07Z

bip-0388.mediawiki

+<pre>
+tr(musig(xpubA,xpubB,xpubC,xpubD,xpubE)/<0;1>/*), {
+  {
+    {
+      pk(musig(xpubA,xpubB,xpubC)/<2;3>/*),
+      {
+        pk(musig(xpubA,xpubB,xpubD)/<4;5>/*)
+        pk(musig(xpubA,xpubB,xpubE)/<6;7>/*),
+      }
+    },
+    {
+      pk(musig(xpubA,xpubC,xpubD)/<8;9>/*),
+      {
+        pk(musig(xpubA,xpubC,xpubE)/<10;11>/*),
+        pk(musig(xpubA,xpubD,xpubE)/<12;13>/*)
+      }
+    }
+  },
+  {
+    {
+      pk(musig(xpubB,xpubC,xpubD)/<14;15>/*),
+      pk(musig(xpubB,xpubC,xpubE)/<16;17>/*)
+    },
+    {
+      pk(musig(xpubB,xpubD,xpubE)/<18;19>/*),
+      {
+        pk(musig(xpubC,xpubD,xpubE)/<20;21>/*),
+        sortedmulti_a(3,
+          xpubA/<22;23>/*,
+          xpubB/<22;23>/*,
+          xpubC/<22;23>/*,
+          xpubD/<22;23>/*,
+          xpubE/<22;23>/*)
+      }
+    }
+  }
+})
+</pre>


This example is hard to access since the format it uses is only introduced later in the Specification section.

Agreed; moreover, plus this is using musig which is not even part of the standard. A text description is probably sufficient: 95cf539.

bip-0388.mediawiki

murchandamus · 2024-04-22T19:26:06Z

bip-0388.mediawiki

+ Descriptor:wsh(or_d(pk([6738736c/48'/0'/0'/100']xpub6FC1fXFP1GXQpyRFfSE1vzzySqs3Vg63bzimYLeqtNUYbzA87kMNTcuy9ubr7MmavGRjW2FRYHP4WGKjwutbf1ghgkUW9H7e3ceaPLRcVwa),and_v(v:multi(2,[b2b1f0cf/44'/0'/0'/100']xpub6EYajCJHe2CK53RLVXrN14uWoEttZgrRSaRztujsXg7yRhGtHmLBt9ot9Pd5ugfwWEu6eWyJYKSshyvZFKDXiNbBcoK42KRZbxwjRQpm5Js,[a666a867/44'/0'/0'/100']xpub6Dgsze3ujLi1EiHoCtHFMS9VLS1UheVqxrHGfP7sBJ2DBfChEUHV4MDwmxAXR2ayeytpwm3zJEU3H3pjCR6q6U5sP2p2qzAD71x9z5QShK2,[bb641298/44'/0'/0'/100']xpub6Dz8PHFmXkYkykQ83ySkruky567XtJb9N69uXScJZqweYiQn6FyieajdiyjCvWzRZ2GoLHMRE1cwDfuJZ6461YvNRGVBJNnLA35cZrQKSRJ),older(65535))))
+<br>
+
+TBD: add examples with taproot scripts and miniscript.


This looks like an open todo.

Indeed; added a taproot example in 95cf539.

bip-0388.mediawiki

murchandamus · 2024-04-22T21:32:02Z

I also noticed that this BIP does not have a Rationale section, although it seems to me that the rationale is sufficiently covered in Motivation and Specification (and therefore no change is necessary in that regard).

murchandamus

One of the automated checks is failing, because the BIP is not added to the overview table. Please add your BIP to the table in README.mediawiki. You can find the expected table entry in the error message of the failed check.

jonatack · 2024-05-06T15:59:29Z

Yes, it's nice that the check is working now. Here's the entry it suggests:

+> | [[bip-0388.mediawiki|388]]
+> | Applications
+> | Wallet Policies for Descriptor Wallets
+> | Salvatore Ingala
+> | Standard
+> | Draft
+> |-

Co-authored-by: Mark "Murch" Erhardt <murch@murch.one>

- Removed large example of taproot policy; replaced with the textual description - Added an example of a taproot wallet policy containing miniscript

bigspider · 2024-05-07T09:06:25Z

Rebased, and addressed the final comments (thank you!).
Please let me know if you prefer me to squash the new commits.

murchandamus

I did another thorough read and noticed a few style and grammar nits. I did not review the examples or technical details of the proposal. I do not consider any of these comments to be blockers, please feel free to adopt or ignore them at your leisure.

It is not necessary to squash the commits, please follow your own preference.

bip-0388.mediawiki

Co-authored-by: Mark "Murch" Erhardt <murch@murch.one>

bigspider · 2024-05-07T20:30:18Z

Thanks @murchandamus for the thorough suggestions!
I accepted almost all directly, and slightly modified the remaining ones in 7d0c08e.

murchandamus

ACK 7d0c08e

bigspider mentioned this pull request Nov 16, 2022

[PoC] Wallet policies (and miniscript support) bitcoin-core/HWI#647

Draft

darosior reviewed Nov 30, 2022

View reviewed changes

kallewoof added the New BIP label Jan 4, 2023

bigspider force-pushed the bip-wallet-policies branch from 25da615 to 162c675 Compare January 24, 2023 09:19

jgriffiths mentioned this pull request Feb 13, 2023

descriptor: Implement wallet-policies BIP ElementsProject/libwally-core#369

Merged

jgriffiths reviewed Feb 13, 2023

View reviewed changes

bucko13 reviewed Feb 15, 2023

View reviewed changes

bip-wallet-policies.mediawiki Outdated Show resolved Hide resolved

bigspider force-pushed the bip-wallet-policies branch from 307112f to bb98f80 Compare February 21, 2023 08:30

ariard mentioned this pull request Apr 15, 2023

Add BumpTransaction event handler lightningdevkit/rust-lightning#2089

Merged

bigspider mentioned this pull request May 2, 2023

2-of-2 multisig spends without co-signer key constraint LedgerHQ/app-bitcoin-new#153

Closed

joostjager reviewed May 2, 2023

View reviewed changes

benma reviewed Jun 13, 2023

View reviewed changes

benma mentioned this pull request Jul 11, 2023

Output Script Descriptor (with Miniscript) support BitBoxSwiss/bitbox02-firmware#911

Closed

bigspider mentioned this pull request Dec 11, 2023

Output descriptor with both receiving and change paths bitcoinerlab/descriptors#31

Open

luke-jr reviewed Dec 26, 2023

View reviewed changes

bip-wallet-policies.mediawiki Outdated Show resolved Hide resolved

luke-jr changed the title ~~[New BIP] Wallet Policies~~ BIP 388: Wallet Policies for Descriptor Wallets Dec 26, 2023

bitschmidty mentioned this pull request Jan 2, 2024

Newsletters: add 283 (2024-01-03) bitcoinops/bitcoinops.github.io#1451

Merged

1 task

bigspider mentioned this pull request Jan 5, 2024

Handle compatibility w/ airgapped QRCode communicant wallet wizardsardine/liana#539

Open

bigspider force-pushed the bip-wallet-policies branch from 07f0fcf to 3bb2cfe Compare January 8, 2024 10:50

bigspider force-pushed the bip-wallet-policies branch from 3bb2cfe to d4c650b Compare January 8, 2024 11:18

seedhammer mentioned this pull request Feb 9, 2024

Add bip-psbt-descriptors #1548

Draft

seedhammer mentioned this pull request Mar 16, 2024

Adding Type code for Descriptor coinkite/BBQr#1

Open

murchandamus reviewed Apr 22, 2024

View reviewed changes

murchandamus requested changes May 6, 2024

View reviewed changes

bigspider and others added 5 commits May 7, 2024 10:58

New BIP: Wallet Policies

44798a2

Update assigned BIP number; change type to "Standards Track"

25657cb

Apply suggestions from code review

40c7760

Co-authored-by: Mark "Murch" Erhardt <murch@murch.one>

Improvements from PR review.

95cf539

- Removed large example of taproot policy; replaced with the textual description - Added an example of a taproot wallet policy containing miniscript

Added BIP-388 to README

a0c8501

bigspider force-pushed the bip-wallet-policies branch from ff61433 to a0c8501 Compare May 7, 2024 09:00

murchandamus approved these changes May 7, 2024

View reviewed changes

bigspider and others added 2 commits May 7, 2024 22:10

Apply suggestions from code review

cf2250e

Co-authored-by: Mark "Murch" Erhardt <murch@murch.one>

More nits from PR review

7d0c08e

murchandamus approved these changes May 8, 2024

View reviewed changes

murchandamus merged commit 56575ff into bitcoin:master May 8, 2024
3 checks passed

bucko13 mentioned this pull request May 8, 2024

May 2024 austinbitdevs/austinbitdevs.com#33

Closed


		A more native, compact representation of the wallet receive/change might also benefit the UX of software wallets using descriptors to represent software wallets using descriptors (possibly with miniscript) for complex locking conditions.

		We remark that wallet policies are not related to the ''policy'' language, a higher level language that can be compiled to miniscript.


		TODO: reference BIP-389 for multipath descriptors (not yet merged into the bips repository at time of writing).

		The <tt>/*</tt> in the placeholder template represents commonly used paths for receive/change addresses, and is equivalent to <tt><0;1>/</tt>.


		=== Implementation guidelines ===

		Implementations must not necessarily implement all the possible wallet policies defined by this standard, but it is recommended to clearly document any limitation.

BIP 388: Wallet Policies for Descriptor Wallets #1389

BIP 388: Wallet Policies for Descriptor Wallets #1389

Conversation

bigspider commented Nov 16, 2022 • edited

darosior left a comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

joostjager May 2, 2023 • edited

Choose a reason for hiding this comment

bigspider commented Jan 24, 2023

jgriffiths Feb 13, 2023 • edited

Choose a reason for hiding this comment

Choose a reason for hiding this comment

jgriffiths Feb 22, 2023 • edited

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

bigspider commented Feb 21, 2023

joostjager May 2, 2023 • edited

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

jgriffiths Sep 1, 2023 • edited

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

darosior commented Aug 9, 2023

luke-jr left a comment

Choose a reason for hiding this comment

bigspider commented Jan 8, 2024 • edited

bigspider commented Feb 5, 2024

darosior commented Apr 2, 2024

murchandamus left a comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

murchandamus commented Apr 22, 2024 • edited

murchandamus left a comment

Choose a reason for hiding this comment

jonatack commented May 6, 2024

bigspider commented May 7, 2024

murchandamus left a comment • edited

Choose a reason for hiding this comment

bigspider commented May 7, 2024

murchandamus left a comment

Choose a reason for hiding this comment

bigspider commented Nov 16, 2022 •

edited

joostjager May 2, 2023 •

edited

jgriffiths Feb 13, 2023 •

edited

jgriffiths Feb 22, 2023 •

edited

joostjager May 2, 2023 •

edited

jgriffiths Sep 1, 2023 •

edited

bigspider commented Jan 8, 2024 •

edited

murchandamus commented Apr 22, 2024 •

edited

murchandamus left a comment •

edited