Betaflight 4.3.0 Release Candidate 7
Pre-release
This is our seventh release candidate (RC7) for Betaflight 4.3.
This release candidate is likely to be the final release candidate before we do a final, and move to start working on 4.4. We anticipate that the final release will be in approximately 7 days (if no major issues are discovered).
Remember some things may need fixing and fine tuning, and there may still be bugs. Please use it with caution and report back any issues at https://github.com/betaflight/betaflight/issues. Thank you!
**Note: Failsafe code has been updated extensively. See: https://github.com/betaflight/betaflight/blob/master/docs/Failsafe.md
**Note: The Betaflight side of CRSF baud rate negotiation has been improved, but it will require new RX firmware to be released for best results. If you're experiencing issues, crsf_use_negotiated_baud should be kept OFF(default) until further notice.
IMPORTANT: Make sure you install and use the latest version of the Betaflight Configurator (10.8-RC7 or higher) from https://github.com/betaflight/betaflight-configurator/releases/tag/10.8.0-RC7 before updating your firmware.
To get the best out of the flight performance improvements, please read the Tuning Notes.
If you want to talk about Betaflight, ask configuration questions, or just hang out with fellow pilots, you can do this in our Facebook group.
Betaflight also has a presence on the Discord messaging platform. Come and join us. Most developers hang out there, so this is a great place to talk about the things you are tinkering with in Betaflight, or get help with really complicated configuration problems.
Betaflight 4.3 Release Candidate 7 brings the following updates:
Improvements
- Adding standard SIGN function by @blckmn in #11566
- Changes in "crash flip" OSD warning by @limonspb in #11621
Fixes
- Reorder SPI_MOSI 1 and SPI_MISO 1 stream options by @haslinghuis in #11561
- BMI270 driver was reading 1 byte too many by @SteveCEvans in #11568
- CRSF use persistent object to retain baudrate by @klutvott123 in #11564
- Fix ICM-20689 initialisation by @SteveCEvans in #11584
- Change ACC Trim step to 1 (for stick commands) by @limonspb in #11588
- Revert BMI270 read length change, but keep typo fix by @SteveCEvans in #11609
- Fix SPI4 DMA assignment by @haslinghuis in #11604
- Add gyro lock/dma support to BMI160 by @SteveCEvans in #11549
- ELRS SPI Fix eeprom write and reboot for msp over telemetry by @klutvott123 in #11573
- Add CRCs to EEPROM PG records to enable check for dirty config by @SteveCEvans in #11597
- Simplify SPI CLK speed setting during gyro detection by @SteveCEvans in #11613
New Contributors
- @mituritsyn made their first contribution in #11559
Full Changelog: 4.3.0-RC6...4.3.0-RC7
