-
Notifications
You must be signed in to change notification settings - Fork 179
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Problem with 2,5 Gb speed on DS214Play #369
Comments
After a few days of testing my son finaly found the solution. He checked all the existing r8152 drivers on GitHub and told me to install the following version 2.15.0-4 DSM7.0. And tada I got my speed with Iperf3 tested to 140 MB/s instead of 80 MB/s Also I checked the MTU setting in my nas and was confirmed MTU 9000. So I am a happy guy. |
@bb-qq how is this possible? |
I released the version 2.17.1-2 which is almost same configuration as 2.15.0-4. Could you try it? |
Well, I just installed the version 2.17.1-2 and can confirm that the speed is up and around 140MB/s and the settings of MTU 9000 in my nas (networkinterface) is ok. So many thanks for adapting the old driver version. |
Description of the problem
I have my NAS connected with a Ugreen adapter (New with realtek RTL8156BG) through a 2,5 Gb 8 port switch to my PC with 2,5 Gb network connector.
But checking the speed with Iperf3 I get 80 MB as a maximum.
Checked the Ugreen adapter on another PC and there it has a speed of 275 MB (Amazing), so the adapter is ok.
Changing to the other USB 3.0 connections (front and rear), still have 80 MB.
Have another NAS (Asustor AS3202T) with a Asustor 2,5 Gb adapter on my PC and the speed is up to 280 MB.MTU settings on it = 9000 as on my PC.
Manualy I set the MTU of my DS214Play to MTU 9000,but checking with the command ip a, I see that it did not change to 9000, still is on MTU 1500.
Setting the MTU on the PC to 1500, the speed drops to 40 MB .
My question: Is there a possibility to force the DS214Play (with a script) to accept the MTU 9000, because I am very sure that this is the problem.
By the way : I followed all the instructions as mentioned on github. Driver r8152-2.17.1 for the 7.1 DSM and Evansport cpu properly installed and confirmed by my NAS.
The text was updated successfully, but these errors were encountered: