You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
DS1813+
Linux MINK 3.10.108 #42962 SMP Mon May 29 14:36:28 CST 2023 x86_64 GNU/Linux synology_cedarview_1813+
DSM version 7.1.1-42962 Update 6
J5create JCH474
Description of your environment
Connected through Netgear 1GB switch
Cat 6
Output of dmesg command
221.890942] usbcore: registered new interface driver aqc111
[ 303.678858] usb 8-1: USB disconnect, device number 2
[ 355.155634] usb 8-2: new SuperSpeed USB device number 3 using etxhci_hcd-170202
[ 394.180652] usb 8-2: USB disconnect, device number 3
[ 399.417308] usb 2-5: new high-speed USB device number 4 using ehci-pci
[ 952.240838] Module [aqc111] is removed.
[ 952.244831] usbcore: deregistering interface driver aqc111
[ 952.253618] Module [usbnet] is removed.
[ 952.260213] Module [mii] is removed.
[ 1930.978664] usb 2-5: USB disconnect, device number 4
[ 2231.715745] usb 7-1: new high-speed USB device number 3 using etxhci_hcd-170202
[ 2231.734333] usb 7-1: not running at top speed
[ 2235.199462] usb 7-1: new high-speed USB device number 3 using etxhci_hcd-170202
[ 2235.218036] usb 7-1: not running at top speed
[ 2238.683094] usb 7-1: new high-speed USB device number 3 using etxhci_hcd-170202
[ 2238.701740] usb 7-1: not running at top speed
[ 2242.166721] usb 7-1: new high-speed USB device number 3 using etxhci_hcd-170202
[ 2242.185320] usb 7-1: not running at top speed
[ 2245.650352] usb 7-1: new high-speed USB device number 3 using etxhci_hcd-170202
[ 2245.668900] usb 7-1: not running at top speed
[ 2249.133974] usb 7-1: new high-speed USB device number 3 using etxhci_hcd-170202
[ 2249.152478] usb 7-1: not running at top speed
[ 2249.160846] Got empty serial number. Generate serial number from product.
[ 2249.168589] ethub 7-1:1.0: USB hub found
[ 2249.172844] ethub 7-1:1.0: 4 ports detected
[ 2250.875412] usb 7-1.4: new high-speed USB device number 4 using etxhci_hcd-170202
[ 2363.302363] usbcore: registered new interface driver r8152
[ 2364.435569] usb 7-1.4: reset high-speed USB device number 4 using etxhci_hcd-170202
[ 2364.586249] r8152 7-1.4:1.0 eth4: v2.17.1 (2023/06/13)
[ 2364.591451] r8152 7-1.4:1.0 eth4: This product is covered by one or more of the following patents:
US6,570,884, US6,115,776, and US6,327,625.
[ 2364.607229] r8152 7-1.4:1.0 eth4: chip rev 6
[ 2364.611574] r8152 7-1.4:1.0 eth4: rx_buf_sz will be overridden to 16384
[ 2365.553836] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
[ 2368.216128] IPv6: ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
[ 2368.226534] r8152 7-1.4:1.0 eth4: carrier on
Yes, I needed another Ethernet port. Didn't care about the speed.
Sent from Yahoo Mail on Android
On Wed, Sep 13, 2023 at 3:43 PM, ***@***.***> wrote:
So you installed a 2,5gbit adapter on a 1gb switch?
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you authored the thread.Message ID: ***@***.***>
It's my backup nas. The 4 1 gig ports are bonded and connected directly to my other nas. Ds1819+ It replicates all my data. I needed 1 port for admin. Didn't need to be fast.
Sent from Yahoo Mail on Android
On Wed, Sep 13, 2023 at 4:32 PM, ***@***.***> wrote:
And you already had 4 gbit ports ... just out of curiosity... where do you need them for?
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you authored the thread.Message ID: ***@***.***>
Working
Description of your products
Description of your environment
Output of
dmesg
command221.890942] usbcore: registered new interface driver aqc111
[ 303.678858] usb 8-1: USB disconnect, device number 2
[ 355.155634] usb 8-2: new SuperSpeed USB device number 3 using etxhci_hcd-170202
[ 394.180652] usb 8-2: USB disconnect, device number 3
[ 399.417308] usb 2-5: new high-speed USB device number 4 using ehci-pci
[ 952.240838] Module [aqc111] is removed.
[ 952.244831] usbcore: deregistering interface driver aqc111
[ 952.253618] Module [usbnet] is removed.
[ 952.260213] Module [mii] is removed.
[ 1930.978664] usb 2-5: USB disconnect, device number 4
[ 2231.715745] usb 7-1: new high-speed USB device number 3 using etxhci_hcd-170202
[ 2231.734333] usb 7-1: not running at top speed
[ 2235.199462] usb 7-1: new high-speed USB device number 3 using etxhci_hcd-170202
[ 2235.218036] usb 7-1: not running at top speed
[ 2238.683094] usb 7-1: new high-speed USB device number 3 using etxhci_hcd-170202
[ 2238.701740] usb 7-1: not running at top speed
[ 2242.166721] usb 7-1: new high-speed USB device number 3 using etxhci_hcd-170202
[ 2242.185320] usb 7-1: not running at top speed
[ 2245.650352] usb 7-1: new high-speed USB device number 3 using etxhci_hcd-170202
[ 2245.668900] usb 7-1: not running at top speed
[ 2249.133974] usb 7-1: new high-speed USB device number 3 using etxhci_hcd-170202
[ 2249.152478] usb 7-1: not running at top speed
[ 2249.160846] Got empty serial number. Generate serial number from product.
[ 2249.168589] ethub 7-1:1.0: USB hub found
[ 2249.172844] ethub 7-1:1.0: 4 ports detected
[ 2250.875412] usb 7-1.4: new high-speed USB device number 4 using etxhci_hcd-170202
[ 2363.302363] usbcore: registered new interface driver r8152
[ 2364.435569] usb 7-1.4: reset high-speed USB device number 4 using etxhci_hcd-170202
[ 2364.586249] r8152 7-1.4:1.0 eth4: v2.17.1 (2023/06/13)
[ 2364.591451] r8152 7-1.4:1.0 eth4: This product is covered by one or more of the following patents:
US6,570,884, US6,115,776, and US6,327,625.
[ 2364.607229] r8152 7-1.4:1.0 eth4: chip rev 6
[ 2364.611574] r8152 7-1.4:1.0 eth4: rx_buf_sz will be overridden to 16384
[ 2365.553836] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
[ 2368.216128] IPv6: ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
[ 2368.226534] r8152 7-1.4:1.0 eth4: carrier on
Output of
lsusb
commandlsusb
|__usb1 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd 0000:00:1a.7) hub
|__usb2 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd 0000:00:1d.7) hub
|__2-1 f400:f400:0100 00 2.00 480MBit/s 200mA 1IF (Synology DiskStation 650045FD10852167)
|__usb3 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1a.0) hub
|__usb4 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.0) hub
|__usb5 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.1) hub
|__5-2 051d:0002:0090 00 2.00 12MBit/s 2mA 1IF (American Power Conversion Back-UPS ES 600M1 FW:928.a9 .D USB FW:a9 4B2216P16436 )
|__usb6 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.2) hub
|__usb7 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (Linux 3.10.108 etxhci_hcd-170202 Etron xHCI Host Controller 0000:05:00.0) hub
|__7-1 2109:2817:0214 09 2.10 480MBit/s 0mA 1IF (VIA Labs, Inc. USB2.0 Hub ffffff94ffffffb4ffffff94ffffffb4) hub
|__7-1.4 0bda:8153:3000 00 2.10 480MBit/s 200mA 1IF (Realtek USB 10/100/1000 LAN 000001)
|__usb8 1d6b:0003:0310 09 3.00 5000MBit/s 0mA 1IF (Linux 3.10.108 etxhci_hcd-170202 Etron xHCI Host Controller 0000:05:00.0) hub
Output of
ifconfig -a
commandifconfig -a
bond0 Link encap:Ethernet HWaddr 00:11:32:2E:D6:AE
inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:7434 errors:0 dropped:0 overruns:0 frame:0
TX packets:8139 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:894692 (873.7 KiB) TX bytes:839137 (819.4 KiB)
eth0 Link encap:Ethernet HWaddr 00:11:32:2E:D6:AC
inet addr:192.168.0.151 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::211:32ff:fe2e:d6ac/64 Scope:Link
inet6 addr: 2600:1008:a002:9b20:211:32ff:fe2e:d6ac/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:17829 errors:0 dropped:0 overruns:0 frame:0
TX packets:21438 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8711497 (8.3 MiB) TX bytes:17624691 (16.8 MiB)
eth1 Link encap:Ethernet HWaddr 00:11:32:2E:D6:AD
inet addr:169.254.175.56 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth2 Link encap:Ethernet HWaddr 00:11:32:2E:D6:AE
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:7434 errors:0 dropped:0 overruns:0 frame:0
TX packets:8139 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:894692 (873.7 KiB) TX bytes:839137 (819.4 KiB)
eth3 Link encap:Ethernet HWaddr 00:11:32:2E:D6:AE
UP BROADCAST SLAVE MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth4 Link encap:Ethernet HWaddr 00:E0:4F:82:4C:FB
inet addr:192.168.0.79 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: 2600:1008:a002:9b20:2e0:4fff:fe82:4cfb/64 Scope:Global
inet6 addr: fe80::2e0:4fff:fe82:4cfb/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3289 errors:0 dropped:0 overruns:0 frame:0
TX packets:4960 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:487152 (475.7 KiB) TX bytes:5860891 (5.5 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:13790 errors:0 dropped:0 overruns:0 frame:0
TX packets:13790 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1816916 (1.7 MiB) TX bytes:1816916 (1.7 MiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
The text was updated successfully, but these errors were encountered: