- suitable for Y right-stop configuration
- Home X: 0
- Home Y: 0
- Home Z: 0
- X Min: -35
- Y Min: 0
- X Max 220
- Y Max 220
- Bed Left -51
- Bed Front 0
- Print Area Width: 220
- Print Area Depth: 220
- Print Area Height: 240
Control board is (Melzi 3.0 v3](https://reprap.org/wiki/Melzi#Melzi_Version_2.0)
- Need a additional power device/control board for hotbed.
- Use hotbed power/temp sensor for additional extruder
- Use XStop with LN298/stepper motor for second extruder
- Diamond extruder can be installed with X,Y,Z stop and Arduino CNC board
- dual Melsi(master-slave) from RepRap tricolor
- adding more extruders
- Diamond hotend
- Repetier color mix
- Stepper expander\melzi
- RUMBA board
- Bigtech SKR Pro v1.1 board - with dual Z
- RAMPS-FD board
- Repetier support color info in AFM file, while OpenSCAD don't(yet).
- Color setup for Repetier described here - Color # in preinter settings is the same, as material id in AMF file
Usage of 0.2mm extruder is highly recomended. Probably, 0.3mm can be used too, but with 0.4mm is almost impossible to recieve suitable quality in size of H0.
- rails
- terrain vi heightmap