This is a P8X32A/Propeller, P2X8C4M64P/Propeller 2 driver object for the SX1280 LoRa/GFSK/FLRC/BLE transceiver.
IMPORTANT: This software is meant to be used with the spin-standard-library (P8X32A) or p2-spin-standard-library (P2X8C4M64P). Please install the applicable library first before attempting to use this code, otherwise you will be missing several files required to build the project.
- SPI connection at 1MHz (P1)
- Over-the-air (OTA) data rate from 125kBaud to 2MBaud (GFSK), 1.2kBaud to 63kBaud (LoRa)
- GFSK (incl. BLE), FLRC, LoRa modulation
- Set common RF parameters: Bandwidth, carrier freq, TX power (and ramp-up/down time)
- Set number of preamble bits/symbols
- Set function of SX1280's GPIO pins
- Options for increasing transmission robustness: Data whitening, CRC (1 and 2 byte)
- RSSI measurement
- Set/read/clear interrupts
- Payload received and sent flags (GFSK, BLE, FLRC only)
- Test modes: Continuous preamble, CW, frequency synthesizer modes
- Presets for common settings, data rates (LoRa DR0..7)
P1/SPIN1:
- spin-standard-library
P2/SPIN2:
p2-spin-standard-library
| Processor | Language | Compiler | Backend | Status |
|---|---|---|---|---|
| P1 | SPIN1 | FlexSpin (5.9.14-beta) | Bytecode | OK |
| P1 | SPIN1 | FlexSpin (5.9.14-beta) | Native code | OK |
| P1 | SPIN1 | OpenSpin (1.00.81) | Bytecode | Untested (deprecated) |
| P2 | SPIN2 | FlexSpin (5.9.14-beta) | NuCode | Not yet implemented |
| P2 | SPIN2 | FlexSpin (5.9.14-beta) | Native code | Not yet implemented |
| P1 | SPIN1 | Brad's Spin Tool (any) | Bytecode | Unsupported |
| P1, P2 | SPIN1, 2 | Propeller Tool (any) | Bytecode | Unsupported |
| P1, P2 | SPIN1, 2 | PNut (any) | Bytecode | Unsupported |
- Very early in development - may malfunction, or outright fail to build
- Most settings that have modulation-specific settings availability are only implemented with GFSK in mind - others are planned/WIP
- UART interface not implemented (not currently planned)