Description

This repository contains a simple example of a project using the libopencm3 with th STM32F303VCTx microcontroller.

Dependencies

• arm-none-eabi-gcc
• arm-none-eabi-gdb
• arm-none-eabi-newlib
• openocd (>= 0.8.0)
• make
• gawk

How to compile and upload the examples

Preparation

Before compiling, make sure to initialize and update the libopencm3 git submodule:

$ git submodule init
$ git submodule update

Compile

$ make

You can change the default optimization level (-Og) through the OPT flag:

$ make clean
$ make OPT=-O3

Upload / Flash:

Before uploading/flashing/debugging for the first time select the debug adapter:

$ ./dbgcfg
Please chose the debug interface:
[0] ST-LINK/V2
[1] ST-LINK/V2-1
[2] JLINK
[3] CMSIS-DAP
Choice:

After that, your choice will be stored on a local ".interface" file. You can change it at any time by invoking the dbgcfg script again.

To flash the microcontroller:

$ make flash

Clean output files:

To clear only output files from the application code (src directory):

$ make clean

To clear all output files including the libopencm3:

$ make distclean

Generate .bin file:

$ make bin

Generate .hex file:

$ make hex

Debugging:

You can debug with gdb you can invoke the debug script (tui mode) or invoke gdb directly:

$ arm-none-eabi-gdb *.elf -x gdbcmd

If you have PyCortexMDebug installed you can invoke gdb with python:

$ arm-none-eabi-gdb *.elf -x pygdbcmd

This will make inspecting microcontroller's registers and bit fields much more convenient.

License

The libopencm3 is licensed under the GNU Lesser General Public License version 3. All other files not within the libopencm3 directory are lincesed under the 3-Clause BSD license.