Skip to content

Tasmota v13.2.0 Quincy
Compare
Choose a tag to compare
@github-actions github-actions released this 19 Oct 09:20
· 935 commits to master since this release
v13.2.0
ff3e3e9
Logo

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version.

Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial. If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version.

Pay attention to the following version breaks due to dynamic settings updates:

  1. Migrate to Sonoff-Tasmota 3.9.x
  2. Migrate to Sonoff-Tasmota 4.x
  3. Migrate to Sonoff-Tasmota 5.14 (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
  4. Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
  5. Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin)

--- Major change in parameter storage layout ---

  1. Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin)

--- Major change in internal GPIO function representation ---

  1. Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz)
  2. Upgrade to latest release (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

This release will be supported from ESP32/Arduino library Core version 2.0.14.

Support of ESP8266 Core versions before 2.7.4.9 and ESP32 Core versions before 2.0.14 have been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface.

Initial installation

Easy initial installation of Tasmota can be performed using the Tasmota WebInstaller.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

  • tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
  • tasmota-4M.bin = The Tasmota version with most drivers and filesystem for 4M+ flash.
  • tasmota-AD.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
  • tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
  • tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
  • tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
  • tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
  • tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
  • tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
  • tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.

Above binaries are also available as gzipped version allowing faster uploads.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32, ESP32-C3, ESP32-S2 and ESP32-S3 based

The following binary downloads have been compiled with ESP32/Arduino library core version 2.0.14.

  • tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
  • tasmota32xy.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 and 4M+ flash.
  • tasmota32xycdc.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 with serial over embedded USB CDC only and 4M+ flash.
  • tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
  • tasmota32-AD.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
  • tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.
  • tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
  • tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
  • tasmota32-lvgl.bin = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
  • tasmota32-nspanel.bin = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support.
  • tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
  • tasmota32-zbbridgepro.bin - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

The latter links can be used for OTA upgrades too like OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin

Additional information

List of embedded modules.

Complete list of available feature and sensors.

Changelog v13.2.0 Quincy

Added

  • Experimental support for ESP32-C2 and ESP32-C6 using Arduino core v3
  • Commands to allow setting of timeprop parameters #19310
  • Command Mi32Name #19619
  • Variables %power<1..28>% and %switch<1..28>% to rules #19331
  • Support different baudrates on BL0942 energy monitor
  • Support for Shelly PlusPMMini, Plus1Mini and Plus1PMMini
  • Support for HDMI CEC protocol #19434
  • Support for ENS16x (air quality) and ENS210 (temp & RH) sensors #19479
  • Support for HC8 CO2 sensor #19714
  • Support for non-persistent WebButton17 to WebButton32 #19580
  • ESP32 commands Ds18Rescan and Ds18RetryRead #19700
  • ESP32 support for influxdb access using https #19582
  • Berry read and write Counters #19558
  • Matter support for Virtual Devices controllable via Rules or Berry #19520

Breaking Changed

  • Sendmail upgraded to ESP-Mail-Client v3.4.9 from v1.2.0, using BearSSL instead of MbedTLS #19460
  • Removed support for Homekit in favour of Matter #19738

Changed

  • ESP32 Framework (Arduino Core) from v2.0.11 to v2.0.14
  • ESP32 LVGL library from v8.3.8 to v8.3.10 (no functional change)
  • Display invert setting after tasmota start in uDisplay driver #19337
  • Consolidate SGP40 and SGP41 into SGP4x driver #19560
  • MAX31855/MAX6675 sensors driver support up to 6 #19329
  • Teleinfo use Apparent Power as Active Power approximation #19756
  • ESP32 LittleFS updated to version with grow option #19635
  • ESP32 I2S audio preparation for Arduino Core v3 #19637
  • ESP32 analog from analogRead() to calibrated analogReadMilliVolts() #19732

Fixed

  • Shutter invert #19341 and #19374
  • Teleinfo power #19381
  • Exception 3 in IRHVAC #19389
  • PCF8574 mode 1 with base relays exception 3/28 regression from v12.4.0.4 #19408
  • ModbusBridge write memory leak #19758
  • Zigbee timezone when device reads LocalTime attribute #19772
  • ESP32 DS18x20 driver support extended over GPIO33
  • ESP32 Support for IPv6 link-local zones for esp-idf 5.1 (necessary for Matter)
  • ESP32 Shutter migration #19454
  • ESP32 Shutter multi press button events #19465
  • ESP32 Shutter button quad press #19589
  • ESP32 shutter frequency #19717
  • ESP32 Arduino Core v2 wifi client flush #19642
  • ESP32 Partition Wizard grow filesystem support #19645
  • ESP32-C3 relay click on restart
  • Matter support for Virtual Devices controllable via Rules or Berry #19520

Removed

  • Support for Homekit in favour of Matter #19738
Assets 179