Skip to content

Debug Performance Issues Using Perf

Jump to bottom
Lukas Joswiak edited this page May 6, 2021 · 2 revisions

perf: https://perf.wiki.kernel.org/index.php/Main_Page is a linux profiler which will allow you to monitor the CPU utilization of a single process. Perf is a useful tool to check whether CPU time is being spent in the appropriate places and to identify potential performance bugs (by seeing which functions are consuming the most CPU cycles).

Quick Start

  1. perf utility can be found in the linux-tools package (sudo apt install linux-tools-common on Ubuntu or yum install perf on CentOS)
  2. Run perf record -g -o <file_name> -p <PID> -- sleep <time>, where file_name is the file which stores the results of the analysis, PID is the process being monitored (which in our case is the PID of fdbserver) and <time> is the amount of time (in seconds) which the profiling occurs over.
  3. perf can open many file connections (which can sometimes exceed the system limit) resulting in a too many open files error. To increase the ulimit follow the instructions here: https://www.tecmint.com/increase-set-open-file-limits-in-linux/
  4. To visualize the perf results, run the following command: perf report -i <file_name> --no-children, where file_name is the same value used in step 2. This will show you which functions used the most CPU time. There are other visualization possibilities as well so go over the wiki for a full rundown of the options available.

See https://forums.foundationdb.org/t/profiling-foundationdb/1337 for a lot more info!

Clone this wiki locally