Skip to content

Wojtek242/route0

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

71 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Route 0

Route 0 is a suite for learning about and experimenting with routing protocols. It uses the Free Range Routing (FRR) protocol implementations running on top of a network setup locally using Mininet.

This project was inspired by Vimal Kumar's BGP hijacking demo from the Mininet Wiki.

Introduction

Motivation

Mininet is a great tool for teaching, learning, and experimenting with networking. However, there was no coherent framework to use which would let one use Mininet to setup a network running an entire set of routing protocols. A small example that demonstrated BGP hijacking has existed for a while and showed that this is possible, but there isn't much more beyond that on case.

The FRR project actually uses Mininet for running topology tests, but that makes them difficult to learn from and experiment with. As somebody looking for resources to learn about configuring networks to play with on my own computer that seemed like a big gap.

Finally, there are lots of resources online for learning the theory of how networks are connected to each other and how routing works on the Internet, but very few of them come with any practical examples. It is one thing to learn the concepts and a completely different thing to apply them in a practical real world scenario. Route 0 was made to address this issue as well.

Purpose

The primary purpose of Route 0 is to provide a framework for learning how routing works all the way from setting up IP addresses on individual interfaces up to setting up BGP peering sessions between multiple autonomous systems and setting up VPN tunnels. Therefore, the primary audience are people new to networking. However, even if you already know some routing basics you might still find some of the examples valuable. The repository is structured such that you can start from any point you like.

A secondary purpose is to provide an experimental testbed in which a network running a whole stack of routing protocols can be quickly designed, provisioned, and brought up on a single computer (mostly thanks to Mininet).

Getting Started

Platform

For the best experience it is recommended to run Route 0 experiments using the Virtual Machine (VM) image developed specifically for this project.

  1. Download the ova file.
  2. In VirtualBox select File->Import Appliance, select the downloaded ova file and then confirm all the settings. You may adjust the settings, but the defaults will work just fine.
  3. Start the Virtual Machine.
  4. (Optional) For a better experience install the VirtualBox Guest Additions. Instructions on how to do that can be found here.

The account user name is route0 and the password (needed for sudo commands) is also route0.

If you would prefer to set up your own environment, you can follow these instructions. They describe the steps needed to produce the exact same VM image available above.

Note that the VM does not come with the route0 repository. This is because the repository will be updated much more frequently than the VM image. You will still need to clone route0 into an appropriate directory on the VM. To do so run the following command in a terminal in the VM

git clone https://github.com/Wojtek242/route0.git

Note that both Mininet and FRR are developed primarily for Linux so if you have a different operating system you will have to use some form of virtualisation. With some effort (and limitations) you might be able to get things running on other Unix-like systems, but that is undocumented.

Lessons

The lessons in this repository are aimed to take somebody who knows nothing about IP routing all the way to setting up networks with multiple autonomous systems and VPN tunnels. The lessons are structured in such a way that the reader must first manually setup and configure the network before moving on to the next step. Each stage starts at a point that can be automatically provisioned by Route 0 and the purpose of each lesson is to explain how this automation is achieved through network configuration. This particular structure also means that it is possible to dive in at any point making it suitable for people with more experience as well.

The table of contents with links to all the lessons can be found in the lessons directory.

Running an experiment

If you just want to get started, choose a topology from the topology directory, and a scenario from the scenario directory within. Note that all topologies support plain and basic in addition to the explicitly defined scenarios. The meaning of these special scenarios is explained in the section on scenarios.

Once you have chosen <topology_name> and <scenario_name> you can run an experiment with the following command from the project directory

sudo python route0.py --topology <topology_name> --scenario <scenario_name>

Connecting to an FRR daemon

To connect to an FRR daamon, you can either run the following command inside the Mininet CLI

noecho <node_name> telnet localhost <daemon_name>

You can also connect to an FRR daemon from a different terminal than the one in which the Mininet CLI is running. To do this run

sudo python attach.py --node <node_name> --daemon <daemon_name>

The password for all daemons is route0.

Mininet Concepts

This section will introduce some basic Mininet concepts that are in particular useful for Route 0. For more information, please refer to the Mininet documentation.

Mininet is a framework for creating virtual networks running real kernel, switch, and application code. In Route 0 it is used to provide the virtualisation necessary to run multiple routing nodes on a single computer. Mininet handles the topology setup before dropping the user in its own special CLI.

The CLI is self-documented and help can be accessed by running help. To investigate the current topology, you can run net. To visualise the output of this command, you can copy and paste it into this web tool.

A particularly useful feature of the CLI is the ability to run shell commands on any of the nodes in the network. To do this, simply run

<node_name> <shell_command>

such as R1 ip address. This is particularly useful in Route 0 for commands like ip address or ip route. Additionally, it is possible to use this feature to send pings between nodes, for example, R1 ping 10.0.0.1. Normally, in Mininet the destination can also be specified using its name. It is possible to do so in Route 0, but this is often ambiguous as routers will have multiple IP addresses associated with their interfaces.

It is also possible to launch a shell or run a command in a Mininet node from a different terminal than the one in which the Mininet CLI is being run. A convenience script has been provided for this purpose, attach.py. To launch a shell on a particular node run

sudo python attach.py --node <node_name>

You can also directly specify the daemon to connect to with --daemon or a shell command to run with --cmd.

The password for all daemons is route0.

FRR Concepts

This section will introduce some basic FRR concepts that are in particular useful to understand for Route 0. For more information, please refer to the FRR documentation.

FRR is a set of routing protocols with each running in its own daemon. In addition, there is a central IP routing manager, zebra, which must be run before any other routing daemon is started. All other routing protocols talk to zebra which in turn will talk to the operating system kernel to install routes as appropriate.

FRR routing protocols are configured using configuration files. The details of how to write these configurations are on the FRR documentation website. It is also possible to connect to a shell on running instances of the protocols and configure it from there. See the Mininet and Getting Started sections on how this can be done.

Structure

There are three key concepts in the Route 0 framework: topology, scenario, and experiment.

Topology

A topology defines the nodes and links that form the network. Additionally it also determines the default IP address assignments and any static routes which are initialised using the zebra and staticd daemons.

Each topology has its own directory in the topology directory. Every topology directory must contain a topo.py file which defines a NetTopo class. The topology itself is defined in the constructor of this class using the Mininet API.

A README.md should be provided with each topology that has a schematic diagram of the topology and lists all the default IP address assignments. It is assumed that hosts have a default route setup to the router they connect to and that routers do not have default routes.

Scenario

A scenario is a particular configuration of FRR protocols on the provided topology. While the topology defines which nodes and links form the network, the scenario determines which protocols get started on which nodes and their configuration.

There are two special scenarios: plain and basic. The plain scenario starts the network without any daemons so only the Mininet topology is set up, but no IP addresses or default routes are created. The basic scenario additionally starts up zebra and staticd to configure addresses and default routes.

Scenarios are defined for a particular topology and thus they can be found in the scenario directory within the topology directories. Each scenario (excluding the special ones) should have a directory in the scenario directory. Within the particular scenario directory, each daemon that is to be run must have a its own directory. The configuration files should be created in the appropriate daemon directory with the name <node_name>.conf. Scenarios may also have an optional scenario.py file for a given scenario in which a script function should be defined. This function is then run after Mininet and FRR are started and just before handing control over to the user.

The zebra and staticd daemons are special and have their own directories directly in the topology directory. If a scenario has its own zebra and/or staticd directory, these will be used preferentially, but otherwise the topology's ones will be used. Note that if no zebra and/or staticd daemon is to be run then the scenario must have empty zebra and/or staticd directories within its scenario directory. Note all FRR protocols rely on zebra to function correctly.

Experiment

An experiment is simply a particular topology and scenario combination. Technically this is redundant since scenarios are strictly associated with only one topology, but using different terminology avoids confusion.

Configuration files

The official FRR documentation recommends using only a single configuration file frr.conf per router. This makes sense if we are only running a single instance of each protocol on the device as then all the configuration is in one place. Route 0 does not do that. Using a single configuration file would mean that a lot of options would need to be repeated between different scenarios, especially for zebra and staticd.

Furthermore, separating the config files makes it easier for the python scripts to know which daemons to start (though of course it could just start all of them every time or use some additional configuration file).

Finally, one last advantage of the Route 0 configuration model for our use case is that the we group configurations per protocol, not per device. This makes no sense if you're running only one instance of a protocol on a given device, but since we are running multiple instances on multiple virtual nodes on a single physical device, it makes it easier to inspect and compare the configurations on a protocol level.

End-host configuration files

It's not entirely normal to run FRR daemons on end-hosts. However, they still need their IP address and default route configured and the options are to do it either from a Python script or use FRR daemons. Using the FRR zebra and staticd daemons makes it easier to configure the end-hosts together with the actual routers. However, they should not be running any daemon other than zebra and staticd.

A note on VTY shell

The recommended way of connecting to daemons by FRR is to use the VTY shell which can connect to all the daemons simultaneously. Unfortunately, in our configuration where multiple instances of the same daemon run on the same machine in Mininet, it gets confused and it doesn't connect as expected. Therefore, you can't use the VTY shell with Route 0.

Contributing

For information on how to contribute see CONTRIBUTING.

Name

I am terrible at coming up with names so I'll at least explain myself. The word "Route" was chosen due to its dual meaning. A route is naturally a central concept in networking, but in every day English it simply means a path, a track, a road. This repository is a tutorial, a road to learning about routing protocols, hence it is a "Route". The number 0 is used to indicate that this is the first route one would take in their networking education.

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published