Skip to content
This repository has been archived by the owner on Dec 14, 2021. It is now read-only.

Embedded C library for The Things Gateway and Linux-based gateways to connect to The Things Network

License

Notifications You must be signed in to change notification settings

TheThingsArchive/ttn-gateway-connector

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

70 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

The Things Network Gateway Connector

Embedded C library for The Things Gateway and Linux-based gateways to connect with The Things Network Router.

Introduction

The connector is an embedded C library intended to use on The Things Gateway and Linux-based gateways to connect with The Things Network.

The connector uses a MQTT connection using the Paho Embedded C/C++ Library. It uses MQTTPacket and MQTTClient-C which are not reliant on particular libraries for networking, threading or memory management.

Messages are packed using Protocol Buffers, a language-neutral, platform-neutral extensible mechanism for serializing structured data. The protos used are The Things Network API compiled to C sources and headers.

Is This Necessary?

Yes. This library provides the following advantages over Semtech's packet forwarder reference implementation:

  1. When using TCP/IP, there is an open and more reliable connection with The Things Network as compared to UDP which suffers from congestion and firewalls. It is my intention to use port 80 instead of 1883 (default MQTT) to minimize outgoing firewall restrictions
  2. When using MQTT, we build on top of a proven and well-supported messaging protocol as compared to custom headers and breaking changes on message protocol level
  3. When using authentication, we can identify gateways according to their ID and security key as compared to user-defined EUIs which deemed unreliable
  4. When using Protocol Buffers, we use proven and well-supported (un)packing and we are binary compatible with The Things Network back-end while minimizing payload and allow for protocol changes

Building

The connector requires a C compiler and protobuf-c to be installed.

Clone the source of the forked Paho Embedded C/C++ Library. Set its relative path to PAHO_SRC in config.mk (copy from config.mk.in). Build the library with make and install with sudo make install.

Build ttn-gateway-connector:

make

Example

#include <stdio.h>
#include <signal.h>
#include <stdint.h>
#include <unistd.h>
#include <stdlib.h>
#include <time.h>
#include "connector.h"

int running = 1;

void stop(int sig)
{
   signal(SIGINT, NULL);
   running = 0;
}

void print_downlink(Router__DownlinkMessage *msg, void *arg)
{
   if (msg->has_payload)
   {
      printf("down: have %zu bytes downlink\n", msg->payload.len);
      switch (msg->protocol_configuration->protocol_case)
      {
      case PROTOCOL__TX_CONFIGURATION__PROTOCOL_LORAWAN:
      {
         Lorawan__TxConfiguration *lora = msg->protocol_configuration->lorawan;
         printf("down: modulation: %d, data rate: %s, bit rate: %d, coding rate: %s, fcnt: %d\n",
                lora->modulation, lora->data_rate, lora->bit_rate, lora->coding_rate, lora->f_cnt);

         Gateway__TxConfiguration *gtw = msg->gateway_configuration;
         printf("down: timestamp: %d, rf chain: %d, frequency: %llu, power: %d, polarization inversion: %d, frequency deviation: %d\n",
                gtw->timestamp, gtw->rf_chain, gtw->frequency, gtw->power, gtw->polarization_inversion, gtw->frequency_deviation);

         break;
      }
      default:
         printf("down: invalid protocol %d\n", msg->protocol_configuration->protocol_case);
         break;
      }
   }
}

int main(int argc, char **argv)
{
   srand(time(NULL));

   signal(SIGINT, stop);
   signal(SIGTERM, stop);

   // Initialize the TTN gateway with ID test
   TTN *ttn;
   ttngwc_init(&ttn, "test", &print_downlink, NULL);
   if (!ttn)
   {
      printf("failed to initialize TTN gateway\n");
      return -1;
   }

   // Connect to the test broker. The secret key is NULL for simplicity
   printf("connecting...\n");
   int err = ttngwc_connect(ttn, "localhost", 1883, NULL);
   if (err != 0)
   {
      printf("connect failed: %d\n", err);
      ttngwc_cleanup(ttn);
      return err;
   }
   printf("connected\n");

   // Start the loop
   int i = 0;
   while (running)
   {
      // Send gateway status. The only parameter we're sending is the time
      Gateway__Status status = GATEWAY__STATUS__INIT;
      status.has_time = 1;
      status.time = ++i;
      err = ttngwc_send_status(ttn, &status);
      if (err)
         printf("status: send failed: %d\n", err);
      else
         printf("status: sent with time %d\n", i);

      // Enter the payload
      unsigned char buf[] = {0x1, 0x2, 0x3, 0x4, 0x5};
      Router__UplinkMessage up = ROUTER__UPLINK_MESSAGE__INIT;
      up.has_payload = 1;
      up.payload.len = sizeof(buf);
      up.payload.data = buf;

      // Set protocol metadata
      Protocol__RxMetadata protocol = PROTOCOL__RX_METADATA__INIT;
      protocol.protocol_case = PROTOCOL__RX_METADATA__PROTOCOL_LORAWAN;
      Lorawan__Metadata lorawan = LORAWAN__METADATA__INIT;
      lorawan.has_modulation = 1;
      lorawan.modulation = LORAWAN__MODULATION__LORA;
      lorawan.data_rate = "SF9BW250";
      lorawan.coding_rate = "4/5";
      lorawan.has_f_cnt = 1;
      lorawan.f_cnt = i;
      protocol.lorawan = &lorawan;
      up.protocol_metadata = &protocol;

      // Set gateway metadata
      Gateway__RxMetadata gateway = GATEWAY__RX_METADATA__INIT;
      gateway.has_timestamp = 1;
      gateway.timestamp = 10000 + i * 100;
      gateway.has_rf_chain = 1;
      gateway.rf_chain = 5;
      gateway.has_frequency = 1;
      gateway.frequency = 86800;
      up.gateway_metadata = &gateway;

      // Send uplink message
      err = ttngwc_send_uplink(ttn, &up);
      if (err)
         printf("up: send failed: %d\n", err);
      else
         printf("up: sent with timestamp %d\n", i);

      sleep(rand() % 10);
   }

   printf("disconnecting\n");
   ttngwc_disconnect(ttn);
   ttngwc_cleanup(ttn);

   return 0;
}

Testing

There is an example Router in examples/router which is written in Go. This requires the Go compiler, see here:

cd examples/router
go run main.go

The sample application src/test.c publishes a message to the MQTT broker on localhost every second as gateway test.

make test

Subscribe to the topic, for example: mosquitto_sub -t test/+ -d. The output should look like this:

➜  ~ mosquitto_sub -t 'test/+' -d
Client mosqsub/14673-Johans-Ma sending CONNECT
Client mosqsub/14673-Johans-Ma received CONNACK
Client mosqsub/14673-Johans-Ma sending SUBSCRIBE (Mid: 1, Topic: test/+, QoS: 0)
Client mosqsub/14673-Johans-Ma received SUBACK
Subscribed (mid: 1): 0
Client mosqsub/14673-Johans-Ma received PUBLISH (d0, q0, r0, m0, 'test/status', ... (2 bytes))

Client mosqsub/14673-Johans-Ma received PUBLISH (d0, q0, r0, m0, 'test/up', ... (43 bytes))

Z
XSF9BW250r4/5xb
               X�R����
Client mosqsub/14673-Johans-Ma received PUBLISH (d0, q0, r0, m0, 'test/status', ... (2 bytes))

Client mosqsub/14673-Johans-Ma received PUBLISH (d0, q0, r0, m0, 'test/up', ... (43 bytes))

Z
XSF9BW250r4/5xb
               X�S����

Next Steps

  • Implement platform specific Timer, Mutex, Condition and Network for Microchip Harmony

Update

Optional: Update Protos

To update the protos to the latest version of The Things Network API, in your $GOPATH/src or sources folder:

mkdir -p github.com/gogo
cd github.com/gogo
git clone https://github.com/gogo/protobuf.git
cd ../..
mkdir -p github.com/TheThingsNetwork
cd github.com/TheThingsNetwork
git clone https://github.com/TheThingsNetwork/ttn.git
cd ttn

If you do not have Go installed or if you do not have cloned the repository to your $GOPATH, set the GOPATH variable in config.mk to the absolute or relative path where you executed the commands above.

make proto

License

Source code for The Things Network is released under the MIT License, which can be found in the LICENSE file. A list of authors can be found in the AUTHORS file.

About

Embedded C library for The Things Gateway and Linux-based gateways to connect to The Things Network

Resources

License

Stars

Watchers

Forks

Packages

No packages published