🎁 Daily Crypto Giveaways 🎉

.gitattributes

@@ -0,0 +1 @@
+src/clientversion.cpp export-subst

.gitignore

@@ -0,0 +1,46 @@
+
+.vs/DailyCrypto/v16/.suo
+
+.vs/DailyCrypto/v16/Browse.VC.db
+
+.vs/DailyCrypto/v16/ipch/AutoPCH/6341fd511bac2398/WALLET.ipch
+
+.vs/DailyCrypto/v16/ipch/AutoPCH/d4dd72bf4fc406ee/ACCUMULATORS.ipch
+
+.vs/ProjectSettings.json
+
+.vs/slnx.sqlite
+
+.vs/VSWorkspaceState.json
+
+.vs/DailyCrypto/v16/Browse.VC.db-shm
+
+.vs/DailyCrypto/v16/Browse.VC.db-wal
+
+.vs/DailyCrypto/v16/Browse.VC.opendb
+
+.vs/DailyCrypto/v16/ipch/AutoPCH/21889540c3ef9115/CHAINPARAMS.ipch
+
+.vs/DailyCrypto/v16/ipch/AutoPCH/220500a4235ac503/BLOCKEXPLORER.ipch
+
+.vs/DailyCrypto/v16/ipch/AutoPCH/350a7d6ed4af58ed/DAILYCRYPTO-CLI.ipch
+
+.vs/DailyCrypto/v16/ipch/AutoPCH/826d2e778adedf97/BLOCK.ipch
+
+.vs/DailyCrypto/v16/ipch/AutoPCH/a9d799ca9db5febf/CLIENTVERSION.ipch
+
+.vs/CMake Overview
+
+.vs/DCG-Crypto/v16/.suo
+
+.vs/DCG-Crypto/v16/Browse.VC.db
+
+.vs/DCG-Crypto/v16/Browse.VC.db-shm
+
+.vs/DCG-Crypto/v16/Browse.VC.db-wal
+
+.vs/DCG-Crypto/v16/Browse.VC.opendb
+
+.vs/DCG-Crypto/v16/ipch/AutoPCH/cc2e78655372bb7f/CHAINPARAMS.ipch
+
+.python-version

.travis.yml

@@ -0,0 +1,268 @@
+# The test build matrix (stage: test) is constructed to test a wide range of
+# configurations, rather than a single pass/fail. This helps to catch build
+# failures and logic errors that present on platforms other than the ones the
+# author has tested.
+#
+# Some builders use the dependency-generator in `./depends`, rather than using
+# apt-get to install build dependencies. This guarantees that the tester is
+# using the same versions as Gitian, so the build results are nearly identical
+# to what would be found in a final release.
+#
+# In order to avoid rebuilding all dependencies for each build, the binaries
+# are cached and re-used when possible. Changes in the dependency-generator
+# will trigger cache-invalidation and rebuilds as necessary.
+#
+# These caches can be manually removed if necessary. This is one of the very
+# few manual operations that is possible with Travis, and it can be done by a
+# BlockidCoin GitHub member via the Travis web interface [0].
+#
+# Travis CI uploads the cache after the script phase of the build [1].
+# However, the build is terminated without saving the chache if it takes over
+# 50 minutes [2]. Thus, if we spent too much time in early build stages, fail
+# with an error and save the cache.
+#
+# [0] https://travis-ci.org/blockidcoin-project/blockidcoin/caches
+# [1] https://docs.travis-ci.com/user/caching/#build-phases
+# [2] https://docs.travis-ci.com/user/customizing-the-build#build-timeouts
+
+dist: xenial
+os: linux
+language: minimal
+cache:
+  ccache: true
+  directories:
+    - $TRAVIS_BUILD_DIR/depends/built
+    - $TRAVIS_BUILD_DIR/depends/sdk-sources
+    - $TRAVIS_BUILD_DIR/cmake-build-debug
+    - $HOME/.ccache
+stages:
+  - lint
+  - cmake
+  - test
+
+env:
+  global:
+    - MAKEJOBS=-j3
+    - RUN_UNIT_TESTS=true
+    - RUN_FUNCTIONAL_TESTS=false
+    - RUN_BENCH=false  # Set to true for any one job that has debug enabled, to quickly check bench is not crashing or hitting assertions
+    - DOCKER_NAME_TAG=ubuntu:18.04
+    - BOOST_TEST_RANDOM=1$TRAVIS_BUILD_ID
+    - CCACHE_SIZE=100M
+    - CCACHE_TEMPDIR=/tmp/.ccache-temp
+    - CCACHE_COMPRESS=1
+    - CCACHE_DIR=$HOME/.ccache
+    - BASE_OUTDIR=$TRAVIS_BUILD_DIR/out
+    - SDK_URL=https://bitcoincore.org/depends-sources/sdks
+    - WINEDEBUG=fixme-all
+    - DOCKER_PACKAGES="build-essential libtool autotools-dev automake pkg-config bsdmainutils curl git ca-certificates ccache"
+    - CACHE_ERR_MSG="Error! Initial build successful, but not enough time remains to run later build stages and tests. Please manually re-run this job by using the travis restart button or asking a bitcoin maintainer to restart. The next run should not time out because the build cache has been saved."
+before_install:
+  - set -o errexit; source .travis/test_03_before_install.sh
+install:
+  - set -o errexit; source .travis/test_04_install.sh
+before_script:
+  - set -o errexit; source .travis/test_05_before_script.sh
+script:
+  - export CONTINUE=1
+  - if [ $SECONDS -gt 1200 ]; then export CONTINUE=0; fi  # Likely the depends build took very long
+  - if [ $CONTINUE = "1" ]; then set -o errexit; source .travis/test_06_script_a.sh; else set +o errexit; echo "$CACHE_ERR_MSG"; false; fi
+  - if [ -n ${BUILD_TIMEOUT+x} ] && [ $SECONDS -gt $BUILD_TIMEOUT ]; then export CONTINUE=0; fi
+  - if [ $SECONDS -gt 2000 ]; then export CONTINUE=0; fi  # Likely the build took very long; The tests take about 1000s, so we should abort if we have less than 50*60-1000=2000s left
+  - if [ $CONTINUE = "1" ]; then set -o errexit; source .travis/test_06_script_b.sh; else set +o errexit; echo "$CACHE_ERR_MSG"; false; fi
+after_script:
+  - echo $TRAVIS_COMMIT_RANGE
+  - echo $TRAVIS_COMMIT_LOG
+jobs:
+  allow_failures:
+    - stage: cmake
+  fast_finish: true
+  include:
+
+    - stage: lint
+      name: 'lint'
+      env:
+      cache: false
+      language: python
+      python: '3.5' # Oldest supported version according to doc/dependencies.md
+      install:
+        - set -o errexit; source .travis/lint_04_install.sh
+      before_script:
+        - set -o errexit; source .travis/lint_05_before_script.sh
+      script:
+        - set -o errexit; source .travis/lint_06_script.sh
+
+    - stage: test
+      name: 'ARM 32-bit  [GOAL: install]  [no unit or functional tests]'
+      env: >-
+        HOST=arm-linux-gnueabihf
+        PACKAGES="python3 g++-arm-linux-gnueabihf"
+        RUN_UNIT_TESTS=false
+        RUN_FUNCTIONAL_TESTS=false
+        GOAL="install"
+        # -Wno-psabi is to disable ABI warnings: "note: parameter passing for argument of type ... changed in GCC 7.1"
+        # This could be removed once the ABI change warning does not show up by default
+        BITCOIN_CONFIG="--with-gui=qt5 --enable-glibc-back-compat --enable-reduce-exports CXXFLAGS=-Wno-psabi"
+
+    - stage: test
+      name: 'ARM 64-bit  [GOAL:install] [no unit or functional tests]'
+      env: >-
+        HOST=aarch64-linux-gnu
+        PACKAGES="python3 g++-aarch64-linux-gnu"
+        RUN_UNIT_TESTS=false
+        RUN_FUNCTIONAL_TESTS=false
+        GOAL="install"
+        BITCOIN_CONFIG="--with-gui=qt5 --enable-glibc-back-compat --enable-reduce-exports"
+
+    - stage: test
+      name: 'Win32  [GOAL: deploy] [no functional tests]'
+      env: >-
+        HOST=i686-w64-mingw32
+        DPKG_ADD_ARCH="i386"
+        PACKAGES="python3 nsis g++-mingw-w64-i686 wine-binfmt wine32"
+        RUN_FUNCTIONAL_TESTS=false
+        GOAL="deploy"
+        BITCOIN_CONFIG="--with-gui=qt5 --enable-reduce-exports"
+
+    - stage: test
+      name: 'Win64  [GOAL: deploy] [no functional tests]'
+      env: >-
+        HOST=x86_64-w64-mingw32
+        PACKAGES="python3 nsis g++-mingw-w64-x86-64 wine-binfmt wine64"
+        RUN_FUNCTIONAL_TESTS=false
+        GOAL="deploy"
+        BITCOIN_CONFIG="--with-gui=qt5 --enable-reduce-exports"
+
+    - stage: test
+      name: '32-bit + dash  [GOAL: install]'
+      env: >-
+        HOST=i686-pc-linux-gnu
+        PACKAGES="g++-multilib python3-zmq"
+        GOAL="install"
+        BITCOIN_CONFIG="--enable-zmq --with-gui=qt5 --enable-glibc-back-compat --enable-reduce-exports LDFLAGS=-static-libstdc++"
+        CONFIG_SHELL="/bin/dash"
+
+    - stage: test
+      name: 'x86_64 Linux  [GOAL: install]  [bionic]  [uses qt5 dev package instead of depends Qt to speed up build and avoid timeout]'
+      env: >-
+        HOST=x86_64-unknown-linux-gnu
+        PACKAGES="python3-zmq qtbase5-dev qttools5-dev-tools libqt5svg5-dev libqt5charts5-dev libqrencode-dev protobuf-compiler libdbus-1-dev libharfbuzz-dev libprotobuf-dev"
+        DEP_OPTS="NO_QT=1 NO_UPNP=1 DEBUG=1 ALLOW_HOST_PACKAGES=1"
+        RUN_FUNCTIONAL_TESTS=true
+        #TEST_RUNNER_EXTRA="--coverage --extended"  # Run extended tests so that coverage does not fail, but exclude the very slow dbcrash
+        GOAL="install"
+        BITCOIN_CONFIG="--enable-zmq --with-gui=qt5 --enable-glibc-back-compat --enable-reduce-exports"
+        BUILD_TIMEOUT=800
+
+    - stage: test
+      name: 'x86_64 Linux  [GOAL: install]  [trusty]  [no functional tests, no depends, only system libs]'
+      env: >-
+        HOST=x86_64-unknown-linux-gnu
+        DOCKER_NAME_TAG=ubuntu:14.04
+        PACKAGES="python3-zmq qtbase5-dev qttools5-dev-tools libqt5svg5-dev libicu-dev libpng-dev libssl-dev libevent-dev bsdmainutils libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev libdb5.1++-dev libminiupnpc-dev libzmq3-dev libprotobuf-dev protobuf-compiler libqrencode-dev libgmp-dev"
+        NO_DEPENDS=1
+        RUN_FUNCTIONAL_TESTS=false
+        GOAL="install"
+        BITCOIN_CONFIG="--enable-zmq --with-incompatible-bdb --with-gui=qt5"
+
+    - stage: test
+      name: 'x86_64 Linux  [GOAL: install]  [xenial]  [no depends, only system libs]'
+      env: >-
+        HOST=x86_64-unknown-linux-gnu
+        DOCKER_NAME_TAG=ubuntu:16.04
+        PACKAGES="python3-zmq qtbase5-dev qttools5-dev-tools libqt5svg5-dev libssl-dev libevent-dev bsdmainutils libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev libdb5.3++-dev libminiupnpc-dev libzmq3-dev libprotobuf-dev protobuf-compiler libqrencode-dev libgmp-dev"
+        NO_DEPENDS=1
+        GOAL="install"
+        BITCOIN_CONFIG="--enable-zmq --with-incompatible-bdb --with-gui=qt5 CPPFLAGS=-DDEBUG_LOCKORDER --disable-hardening --disable-asm"
+
+    - stage: test
+      name: 'x86_64 Linux  [GOAL: install]  [bionic]  [no depends, only system libs]'
+      env: >-
+        HOST=x86_64-unknown-linux-gnu
+        PACKAGES="python3-zmq qtbase5-dev qttools5-dev-tools libqt5svg5-dev libqt5charts5-dev libssl1.0-dev libevent-dev bsdmainutils libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev libdb5.3++-dev libminiupnpc-dev libzmq3-dev libprotobuf-dev protobuf-compiler libqrencode-dev libgmp-dev"
+        NO_DEPENDS=1
+        GOAL="install"
+        BITCOIN_CONFIG="--enable-zmq --with-incompatible-bdb --with-gui=qt5 CPPFLAGS=-DDEBUG_LOCKORDER"
+
+#    - stage: test
+#      name: 'x86_64 Linux  [GOAL: install]  [bionic]  [no depends, only system libs, sanitizers: fuzzer,address]'
+#      env: >-
+#        HOST=x86_64-unknown-linux-gnu
+#        PACKAGES="clang python3-zmq qtbase5-dev qttools5-dev-tools libqt5svg5-dev libqt5charts5-dev libssl1.0-dev libevent-dev bsdmainutils libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev libdb5.3++-dev libminiupnpc-dev libzmq3-dev libprotobuf-dev protobuf-compiler libqrencode-dev libgmp-dev"
+#        NO_DEPENDS=1
+#        RUN_UNIT_TESTS=false
+#        RUN_FUNCTIONAL_TESTS=false
+#        RUN_BENCH=true
+#        GOAL="install"
+#        BITCOIN_CONFIG="--enable-zmq --with-incompatible-bdb --enable-glibc-back-compat --enable-reduce-exports --with-gui=qt5 CPPFLAGS=-DDEBUG_LOCKORDER --with-sanitizers=undefined CC=clang CXX=clang++"
+
+#    - stage: test
+#      name: 'x86_64 Linux  [GOAL: install]  [bionic]  [no wallet]'
+#      env: >-
+#        HOST=x86_64-unknown-linux-gnu
+#        PACKAGES="python3-zmq"
+#        DEP_OPTS="NO_WALLET=1"
+#        GOAL="install"
+#        BITCOIN_CONFIG="--enable-glibc-back-compat --enable-reduce-exports"
+
+    - stage: test
+      name: 'macOS 10.10  [GOAL: deploy] [no functional tests]'
+      env: >-
+        HOST=x86_64-apple-darwin14
+        PACKAGES="cmake imagemagick libcap-dev librsvg2-bin libz-dev libbz2-dev libtiff-tools python3-dev python3-setuptools"
+        OSX_SDK=10.11
+        RUN_UNIT_TESTS=false
+        RUN_FUNCTIONAL_TESTS=false
+        GOAL="deploy"
+        BITCOIN_CONFIG="--enable-gui --enable-reduce-exports --enable-werror"
+
+    - stage: cmake
+      name: 'CMake Linux'
+      language: cpp
+      compiler:
+        - gcc
+      addons:
+        apt:
+          packages:
+           - python3-zmq qtbase5-dev qttools5-dev-tools libqt5svg5-dev libssl-dev libevent-dev bsdmainutils libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev libdb5.3++-dev libminiupnpc-dev libzmq3-dev libprotobuf-dev protobuf-compiler libqrencode-dev libgmp-dev
+      before_install:
+      install:
+      before_script:
+      script:
+        - mkdir -p $TRAVIS_BUILD_DIR/cmake-build-debug && cd $TRAVIS_BUILD_DIR/cmake-build-debug
+        - cmake -DCMAKE_BUILD_TYPE=Debug -G "CodeBlocks - Unix Makefiles" $TRAVIS_BUILD_DIR
+        - cmake --build $TRAVIS_BUILD_DIR/cmake-build-debug --target all -- -j 3
+
+    - stage: cmake
+      name: 'CMake macOS'
+      os: osx
+      osx_image: xcode10.2
+      language: cpp
+      compiler:
+        - clang
+      addons:
+        homebrew:
+          packages:
+            - autoconf
+            - automake
+            - berkeley-db4
+            - libtool
+            - boost
+            - miniupnpc
+            - openssl
+            - pkg-config
+            - protobuf
+            - python3
+            - qt5
+            - zmq
+            - libevent
+            - qrencode
+            - gmp
+          update: false
+      before_install:
+      install:
+      before_script:
+      script:
+        - mkdir -p $TRAVIS_BUILD_DIR/cmake-build-debug && cd $TRAVIS_BUILD_DIR/cmake-build-debug
+        - cmake -DCMAKE_BUILD_TYPE=Debug -G "CodeBlocks - Unix Makefiles" $TRAVIS_BUILD_DIR
+        - cmake --build $TRAVIS_BUILD_DIR/cmake-build-debug --target all -- -j 3