Skip to content

R2.0.0.0

Compare
Choose a tag to compare
@ShikOfTheRa ShikOfTheRa released this 21 May 11:23
ea16efe

!!BETA TEST RELEASE!!

We are pleased to announce the R2.0 release of MWOSD
Note: This release requires a minimum GUI version of 2.0.0.0
Note: This release will default settings for versions prior to 2.0.0.0 - back up in existing version GUI before upgrading.
The latest GUI is available here for download here:
https://github.com/ShikOfTheRa/scarab-osd-gui/tree/master/MW_OSD_GUI

2.0.0.0 Summary of changes :

  • OSD - Antenna tracking support - Sentinel AAT support
  • OSD - Display element for battery % remaining
  • OSD - Display element for embedded VTX
  • OSD - Display element for average cell voltage
  • OSD - Display element for PID
  • OSD - ESC Telemetry OSD target
  • OSD - Support for full screen layout in PAL
  • OSD - PAL/NTSC autocam option without PAL position manipulation
  • OSD - Improved serial performance - especially mavlink
  • OSD - Improved VSYNC performance
  • OSD - VSYNC - automatically use if supporting hardware detected
  • OSD - Support for APM take off mode. TKOF (fixed wing)
  • OSD - co-ordinates in DDMMSS (config.h option)
  • OSD - Support for Mavlink alternative altitude source (config.h option)
  • GUI - support for all OSD changes
  • GUI - 1.9 > 2.0 settings import
  • GUI - Faster and more reliable GUI-OSD read / write operations
  • GUI - copy layouts
  • GUI - move within character editor
  • GUI - extend calibration range to 2601 for non std mavlink RSSI
  • FIX - RSSI for CH8 in KISS
  • FIX - font upload corruptions
  • FIX - reduced serial data corruption
  • FIX - Correct Alt display in high resolution mode (default < 10m)
  • FIX - flickering on top line when using VSYNC

interim changes :

  • OSD - Support for KISS GPS RTH (1.3RC44) - xavier
  • OSD - Support for KISS Turtle mode (1.3RC44) - xavier
  • OSD - Support for KISS Messaging (1.3RC44) - xavier
  • OSD - Support for KISS screen swithc from channel 8-10 - xavier
  • OSD - Support for KISS FC RSSI (CRSF/GHOST) - xavier
  • OSD - Support for Ardupilot ADSB - real aircraft proximity awareness
  • OSD - Support for Ardupilot Buddyflight
  • OSD - Kiss VTX Power / Channel display
  • OSD - Dual timer support
  • OSD - Support for average battery cell display
  • OSD - Support for Steele PDB
  • OSD - Low memory warning added
  • OSD - Setting 0 disables all alarm flashing - except voltage
  • OSD - filter disabled by default - faster sensor updates are more popular
  • OSD - support for canvasOSD - OSD runs purely from OSD
  • OSD - LTM2ADSB protocol converter for buddyflight
  • OSD - UBLOX2ADSB protocol converter for buddyflight
  • OSD - Support for KISS GPS
  • OSD - Support for KISS PID menu support
  • OSD - Support for KISS Filter menu
  • OSD - Support for KISS VTX menu
  • OSD - Support for ARDUSUB
  • OSD - Support for MAVLINK dual GPS / Baro altitude display
  • OSD - Support for MAVLINK high resolution altitude
  • OSD - Significantly improved Mavlink messages. Full length and human readable
  • OSD - Different indicator icons for GPS, Baro and high resolution altitude values
  • OSD - Developer debug memory display functioning for newer compiler versions
  • OSD - Support for up to 12s main battery
  • OSD - Support for APM VTOL
  • OSD - Support for NMEA 9600 baud option pre-compiled
  • OSD - Support for SBUS
  • OSD - Cleaned up code compiler errors.
  • OSD - FlightOne support for 16 channels added
  • OSD - FightOne support added. https://flightone.com/
  • OSD - support for additional iNAV mode display - AUTOLAUNCH, AUTOTRIM, AUTOTUNE, CRUISE
  • OSD - Added a target for display / screen testing
  • OSD - Page re-added for iNAV - how to access all FC settings from within OSD
  • OSD - Added support for remaining flight time
  • GUI - DJI Naza available to flash from GUI
  • GUI - support for additional OSD enhancements
  • GUI - added log player for testing of mavlink / gpsosd etc.
  • GUI - minor cosmetic bugfixes
  • GUI - improvements for more reliable connect. Work around of bug with OS drivers
  • FIX - Bugfix for iNav airspeed display
  • FIX - Bugfix for altitude display. GPS can be displayed independently of Baro altitude
  • FIX - Bugfix for when selected reversed ahi pitch
  • FIX - Bugfix for mavlink auto configure always being enabled
  • FIX - bugfix - added resolution for Betaflight sending non valid date
  • FIX - bugfix - added default support for mavlink FC that do not send throttle value when armed
  • FIX - bugfix for users running iNAV and no GPS - disable low sats text display
  • FIX - bugfix for "lat" displayed instead on "lon"
  • FIX - bugfix for altitude. Always reported in meters
  • FIX - bugfix for max altitude recorded. In some circumstances will not report correctly
  • FIX - LTM O frame support removed for FC that do not use it.
  • FIX - LTM home set improved

Sentinel Antenna tracker:

https://www.virtualpilot.co.uk/index.php?route=product/product&path=63&product_id=59

Summary of changes in earlier releases:

https://github.com/ShikOfTheRa/scarab-osd/wiki/Features