Simple kernel module to control the Jetson Orin clocks. The aim of this kernel module is to provide applications in user space access to the clocks in Jetson Orin machines through system calls - ioctls().
Basically is a wrapper of the standard Linux Kernel Common Clock Framework, actually it could be used in any other platform just by changing the device tree overlay, everything else is completely generic.
This module is based on the NVIDIA MODS kernel driver by NVIDIA CORPORATION. For more information on the MODS kernel driver check the Linux for Tegra kernel sources.
- Jetson Orin family: Orin Nano, NX and AGX
- Enable/disable any clock
- Check whether a clock is enabled or disabled
- Set clock rate in Hz
- Get current clock rate in Hz
This module is basically a platform driver and makes use of the device tree, so the first step is to compile the device tree overlay and use it to patch the main device tree blob, there are several ways of going about this, the following one has been tested and it doesn't imply reflashing or recompiling the whole kernel.
DISCLAIMER - Manipulating the device tree blob might cause your system to behave in unexpected, undesirable ways, handle with care.
-
First of all, clone/download this module sources anywhere in your Orin, say to your home directory:
cd ~ && \ git clone https://github.com/Rubberazer/Jetclocks.git -
Download the Linux for Tegra kernel sources according the version of the kernel running on your Orin, all versions can be downloaded directly from: https://developer.nvidia.com/embedded/jetson-linux-archive
-
Unzip de sources, for instance on your /home directory, you should get a folder looking like ~/Linux_for_Tegra/ with all the kernel sources inside
-
Preprocess the overlay file with some kernel headers:
cd ~/Jetclocks && \ cpp -nostdinc -I ~/Linux_for_Tegra/source/public/hardware/nvidia/soc/t23x/kernel-include/ -undef -x assembler-with-cpp jetclocks.dts jetclocks.dts.new -
Compile overlay:
dtc -I dts -O dtb ./jetclocks.dts.new -o ./jetclocks.dtbo -
Check current device tree in use:
sudo nano /boot/extlinux/extlinux.conf -
You should have something like below, on the FDT line you will also see where your device tree blob (.dtb file) is located and its name, this will be used later:
TIMEOUT 30 DEFAULT primary
MENU TITLE L4T boot options
LABEL primary
LINUX /boot/Image FDT /boot/dtb/kernel_tegra234-p3767-0004-p3768-0000-a0.dtb
...
-
Make sure there is a backup entry, copy and paste the primary label inmediately below, call it backup, afterwards rename the FDT with the name of the future device tree blob on the primary one, let's call it new in our example. It should look something like this:
TIMEOUT 30 DEFAULT primary
MENU TITLE L4T boot options
LABEL primary
LINUX /boot/Image FDT /boot/dtb/new.dtb
...
LABEL backup
LINUX /boot/Image FDT /boot/dtb/kernel_tegra234-p3767-0004-p3768-0000-a0.dtb
...
-
Apply overlay blob (dtbo) to main dt blob, here on the 4th line the name of the original .dtb file is the one you saw before in your extlinux.conf:
cd ~/Jetclocks && \ sudo cp jetclocks.dtbo /boot/dtb && \ cd /boot/dtb && \ sudo fdtoverlay -i kernel_tegra234-p3767-0004-p3768-0000-a0.dtb -o new.dtb jetclocks.dtbo -
Make sure that everything is OK, if you corrupt your device tree and your backup label in extlinux.conf is not correct you will be in trouble.
-
Reboot, after reboot you can check wheter the overlay has been applied:
ls /proc/device-tree/jetclocks/If everything went OK, you should see:
clock-names clocks compatible name status
To compile the module just:
cd ~/Jetclocks && \
make
To insert the module:
sudo insmod jetclocks.ko
If you type a:
sudo dmesg
You should see something like below, you can ignore the "tainting kernel" message, this just means that is not signed (out of tree module), it doesn't have any practical implications:
Probing jetclocks
jetclocks module loaded
To remove the module:
sudo rmmod jetclocks
This module is all about using it from user space, there are 3 basic operations that you can perform from your user space applications that interact with this module. You are going to need a list with valid clock names, you can find this at clock_names.md. There is also a sample application here jetclocks_user, to verify whether a clock is enabled/disabled, clock rate and other parameters, you can type the following from the shell, for instance to check the status of clock spi1:
sudo cat /sys/kernel/debug/bpmp/debug/clk/clk_tree | grep spi1
LIMITATIONS: you might not be able to enable or disable clocks already enabled (in use by some other peripheral), this is due to the fact that the module is not going to be able to get the clock handler. So basically, if some clock is already disabled you should be able to enable and disable it from that point, but not if it is already in use by something else.
Check whether a clock is enabled:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <string.h>
#include <sys/ioctl.h>
#include "jetclocks.h"
int main() {
struct jetclk clock = {0};
int dev = open("/dev/jetclocks", O_WRONLY);
if(dev < 0) {
printf("Opening /dev/jetclocks not possible\n");
return -1;
}
/* Checking whether the "spi1" clok is enabled*/
strncpy(clock.clk, "spi1", sizeof(clock.clk));
ioctl(dev, CLK_IS_ENABLED, &clock);
printf("clock: %s status(0 disabled, 1 enabled): %d\n",clock.clk, clock.clk_enabled);
close(dev);
return 0;
}
Enable clock:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <string.h>
#include <sys/ioctl.h>
#include "jetclocks.h"
int main() {
struct jetclk clock = {0};
int dev = open("/dev/jetclocks", O_WRONLY);
if(dev < 0) {
printf("Opening /dev/jetclocks not possible\n");
return -1;
}
/* Enabling clock "spi1" */
strncpy(clock.clk, "spi1", sizeof(clock.clk));
ioctl(dev, CLK_ENABLE, &clock);
printf("Enabling clock: %s \n",clock.clk);
close(dev);
return 0;
}
Disable clock:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <string.h>
#include <sys/ioctl.h>
#include "jetclocks.h"
int main() {
struct jetclk clock = {0};
int dev = open("/dev/jetclocks", O_WRONLY);
if(dev < 0) {
printf("Opening /dev/jetclocks not possible\n");
return -1;
}
/* Disabling clock "spi1" */
strncpy(clock.clk, "spi1", sizeof(clock.clk));
ioctl(dev, CLK_DISABLE, &clock);
printf("Disabling clock: %s \n",clock.clk);
close(dev);
return 0;
}
Set/Get clock rate:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <string.h>
#include <sys/ioctl.h>
#include "jetclocks.h"
int main() {
struct jetclk clock = {0};
int dev = open("/dev/jetclocks", O_WRONLY);
if(dev < 0) {
printf("Opening /dev/jetclocks not possible\n");
return -1;
}
/* Setting up rate to clock "spi1" */
strncpy(clock.clk, "spi1", sizeof(clock.clk));
clock.clk_set_rate = 40800000; //Default is 81600000
ioctl(dev, CLK_SET_RATE, &clock);
printf("Setting rate: %lu on clock: %s \n",clock.clk_set_rate, clock.clk);
/* Checking current rate on clock "spi1" */
ioctl(dev, CLK_GET_RATE, &clock);
printf("Rate on clock: %s is %lu\n",clock.clk, clock.clk_rate);
close(dev);
return 0;
}