🐳 Docker Support, Bug Fixes, And More!

Hello!

With this release, I'm excited to share that you can now run Bambu Connect with an official Docker image! We have a full guide setup, you can find here:
https://blog.octoeverywhere.com/setup-bambu-connect-with-docker-or-docker-compose/

Or, if you want the docker image, you can find it here:
https://hub.docker.com/r/octoeverywhere/octoeverywhere

Beyond the new docker image for Bambu Connect, this release also has several bug fixes and improvements for all platforms!

Happy Printing!

🎉 Bambu Labs Is Here! Also RTSP Webcam Streaming, Default Camera, And More

I'm so happy to announce with the help of the out-of-this-world OctoEverywhere community...

🎉 OctoEverywhere now fully supports Bambu Lab 3D printers! 🎉

That's not all, here's a full feature breakdown for this release:

• Bambu Connect works with the X1, P1, and A1 lines of Bamb Lab 3D printers to empower them with the full feature set of OctoEverywhere. Instant remote access with Quick View, advanced AI print failure detection with Gadget, notifications to 8+ endpoints, and more. To see the full list of what makes OctoEverywhere special for Bambu Lab 3D printers, check out our Bambu launch page.
• RTSP Webcam Streaming Support - That's right! A highly requested feature has landed! You can now use RTSP streaming webcams with OctoEverywhere. The camera feed will work for Gadget, notifications, Quick View, the dashboard, and more.
• Default Webcam Selection - A smaller but nice-to-have feature is the new default camera support. For multi-camera setups, you can now specify which camera you want OctoEverywhere to use as the default for Quick View, Gadget, notifications, and more.

There are also countless bug fixes, perf improvements, and more in this release.

As always, if you have trouble with this release, questions, or feedback, send us a message via our support system

Happy Printing!

🚀 Bambu Labs Support, Multicam In Quick View, and More!

🚨 Major Release Alert 🚨

I'm so proud to provide you with a new OctoEverywhere release with some major new features!

• Bambu Labs Printer Support - That's right, you can now use OctoEverywhere with your Bambu Labs printers! All printers, including the X1, P1, and A1 series, are supported. This is a beta release of Bambu Connect, so some things may be a bit buggy, but Bambu Connect is well on its way to full support! Check out this setup guide to get started!
  
• Multicam in Quick View and Live Links - A long-requested community feature has arrived! You can now view your cameras directly from Quick View or on a Live Link! All you need to do is update to this plugin version, and your cameras should show up. This is fully supported on both OctoPrint and Klipper setups.
• Tons of Bug Fixes - With the help of the community, we fixed many minor bugs in the plugin that will make it run even better!

🐛🔨 Squashing Some Bugs

This update fixes some minor bugs the community has found.

Like always, if you need any help or have feedback, send us a message!

🚀 Sonic Pad and K1 Support, Betters Snapshots, And More!

Hello Astronauts!

It's been a while; we have been working on many more significant features behind the scenes! We are proud to release plugin version 2.10.0, which includes these out-of-this-world features!

• Native Sonic Pad support - You can install OctoEverywhere directly on your Sonic Pad! Here's a full guide.
• Native K1 and K1 Max support - You can now install OctoEverywhere directly on your K1 or K1 Max! Here's a full guide..
• Webcam image fixes for Telegram and other notifications; this prevented snapshots from being sent in some cases.
• Better multicam integration and adding logic to get ready for new things... ;)
• A basic uninstall script for Klipper-based setups.
• Bug fixes everywhere!

We hope you enjoy the new features and platforms we now support. Our goal at OctoEverywhere is to make a tool for everyone in the maker community, so we try our hardest to keep every platform we can!

Like always, if you need any help, please contact our support team.

Happy Printing!

📷 First Layer Fixes, Better snapshots, and more!

Hey Astronauts!

It's the end of the summer, and we have a lot of spectacular things cooking for the fall! We can't talk about that yet, but this update brings much-needed love to the first-layer compete and third-layer-complete notifications. On Klipper-based printers, these notifications are now perfect, as we use the layer information from Moonraker. OctoPrint still doesn't have a concept of the current print layer, but we added some better z-axis detection logic that should do much better.

Finally, we made a few minor changes to our Final Snap system, which gets the perfect print snapshot at the end of prints. 🤌

That's all for now; stay tuned for some exciting new announcements later this fall!

📟 UI Refresh And Bug Fixes

Hay Astronauts!

Today's update comes with a refreshed portal UI. We also stomped a few new bugs! Short. Simple. To the point.

Happy Printing!

✨ Webcam Stability, Bug Fixes, and More!

Hello All!

No significant news (unlike the last release), but this release has a lot of bug fixes and quality-of-life changes. The most important changes are fixing a few common status bugs, making webcams more robust to different URL formats, and a few other more minor bugs.

Happy Printing!

🚀 UI Updates, Temps, Better Snapshots, & More!

Hey Astronauts!

I'm incredibly excited about this JAM PACKED release! This is one of the most extensive individual plugin updates ever. Let's jump into what's new:

• Live Links Print Tracking 🥳 - Live Links can now track a single print and end when the print ends! When the print succeeds or fails, the live stream is cut off, and the Live Link becomes a nice bookend summarizing the print!
• Quick View And Live Links UI Refresh - We refreshed the Quick View and Live Links UI to make it much more stylish. 😎
• Better 'Print Complete' Snapshots - We implemented a new snapshot system that can capture the perfect final image of your print to send in your Print Complete notification. No longer will your z-axis raise and move the print out of frame!
• Stats, Info, and More Stats - Quick View and Live Links now show live filament usage as well as hotend and bed target and actual temps!
• Notification Relablity - We added a lot of logic around the notification system to make the events fire more reliable, even in bad network conditions.
• A few more significant changes... setting the groundwork for some big new future features... ;)

Along with all of that, we squashed a lot of bugs around Gadget, connection reliability, commands, webcams, and more.

We would love to hear your thoughts on these new features or any issues; join our Discord to chat!

Happy Printing!

🎥 Some WebRTC Improvements And Bug Fixes

Hello Astronauts!

This release brings with it several features and bugs that have been fixed in the last few weeks:

• I was discovered and fixed a major issue with the websocket libaray we use, which fixed a long standing thread leak issue!
• I also adjusted some of the values we use for websocket timeouts, to help work around other websocket lib issues.
• Support for WebRTC is even better. We are still working on full end to end support, but this update fixes some WebRTC streaming based issues with OctoEverywhere.
• Other various bug fixes.

Like always, if you experience any issues, please get in touch with us via our support system!

Happy Printing!