Skip to content

Penglai Enclave is an open-sourced, secure and scalable TEE system for RISC-V.

License

Notifications You must be signed in to change notification settings

Penglai-Enclave/Penglai-Enclave-sPMP

Repository files navigation

build Status: Experimental License: Mulan

Penglai Header

Introduction

Penglai is a RISC-V TEE system, which is designed to be secure, high-performant, and scalable. This repo maintains OpenSBI version of Penglai Enclave based on PMP.

How to use?

Simply replace the OpenSBI used in your system with opensbi-0.9/1.0/1.2 in the top directory in the repo.

You can use our SDK and enclave-driver to build your trusted applications, or even write your own SDKs.

Status and Info

  • Status: experimental: it's still experimental version now, please refer our TVM version for more features.
  • Hardware requirement:for openEuler version $\le$ 20.03, riscv qemu version: $\geq$ 5.2.0 is fine;for openEuler version $\ge$ 22, qemu version:$\geq$ 8.0 is suggested.
  • Supported software system: This repo contains resources to run openEuler with Penglai TEE.
  • Real devices: Penglai for Nuclei devices is maintained in Nuclei Linux SDK.

You can turn to BBL-version by switching to the master branch.

You can refer our Penglai-TVM for more advanced features, including inter-enclave communication, secure storage, shadow fork, and others.

Case: Running openEuler with Penglai

Requirements

Penglai uses Docker for building and uses submodules to track different componets. Therefore, the only requirement to build and run penglai-demo is:

  • Docker: for building/running Penglai
  • Git: for downloading the code
  • Qemu for RISC-V (RV64): suggested version >= 8.0. You can download the qemu here and follow the instructions to build and install qemu.

Build uboot

For openEuler version $\lt$ 23:

There is no need to compile uboot.

# Fetch the uboot submodule
git submodule update --init --recursive

For openEuler version $\ge$ 23:

Follow the instructions in openeuler riscv gitee to compile uboot for OE-23.X.

# Fetch the uboot submodule
git submodule update --init --recursive
docker run -v $(pwd):/home/penglai/penglai-enclave -w /home/penglai/penglai-enclave --network=host --rm -it fly0307/penglai-enclave:v0.5 bash
cd ./u-boot
make qemu-riscv64_smode_defconfig
make ARCH=riscv CROSS_COMPILE=riscv64-unknown-linux-gnu- -j$(nproc)

Build openEuler Kernel

For openEuler version $\lt$ 23:

Follow the instructions in openeuler riscv gitee to compile openEuler kernel.

For example, download the OKL-5.10 in current directory, and compile with penglai's docker image:

docker run -v $(pwd):/home/penglai/penglai-enclave -w /home/penglai/penglai-enclave --rm -it ddnirvana/penglai-enclave:v0.5 bash
# In the docker image
./scripts/build_euler_kernel.sh

For openEuler version $\ge$ 23:

For oe versions greater than 23, you can access the source code after Run openEuler with Penglai Supports and don't need to compile the image like in the previous step for version $\lt$ 23.

Build OpenSBI (with Penglai supports)

If you want to use opensbi 0.9 or 1.0, you need to use the previous version of the penglai-enclave-driver, the corresponding commit is bb5021cd9f76d033d6e174b2b96bbc4503766385. And you can use the latest penglai-enclave-driver to support opensbi-1.2.

For openEuler version $\lt$ 23:

When compiling opensbi-0.9/1.0, you can use the toolchain CROSS_COMPILE=/home/penglai/toolchain-720/bin/riscv64-unkown-linux-gnu-. For opensbi-1.2, you can use CROSS_COMPILE=riscv64-unknown-linux-gnu-.

cp openeuler-kernel/arch/riscv/boot/Image .
docker run -v $(pwd):/home/penglai/penglai-enclave -w /home/penglai/penglai-enclave --rm -it fly0307/penglai-enclave:v0.5 bash
# In the docker image
cd /home/penglai/penglai-enclave/opensbi-0.9
mkdir -p build-oe/qemu-virt
CROSS_COMPILE=/home/penglai/toolchain-720/bin/riscv64-unkown-linux-gnu- make O=build-oe/qemu-virt PLATFORM=generic FW_PAYLOAD=y FW_PAYLOAD_PATH=/home/penglai/penglai-enclave/Image

Note: the /home/penglai/penglai-enclave/Image is the image compiled openEuler Kernel Image.

A simple way: For opensbi-0.9 and oe-2203(oe $\lt$ 23 )

./docker_cmd.sh opensbi-0.9

For openEuler version $\ge$ 23:

docker run -v $(pwd):/home/penglai/penglai-enclave -w /home/penglai/penglai-enclave --rm -it fly0307/penglai-enclave:v0.5 bash
cd /home/penglai/penglai-enclave/opensbi-1.2
rm -rf build-oe/qemu-virt
mkdir -p build-oe/qemu-virt
CROSS_COMPILE=riscv64-unknown-linux-gnu- make O=build-oe/qemu-virt PLATFORM=generic FW_PAYLOAD=y FW_PAYLOAD_PATH=/home/penglai/penglai-enclave/u-boot/u-boot.bin -j$(nproc)

A simpler way: For opensbi-1.2 and oe-2303(oe $\ge$ 23 )

./docker_cmd.sh opensbi-1.2 

For others

./docker_cmd.sh docker
#In the docker image,build opensbi 1.2 for OE20.03
#./scripts/build_opensbi.sh -v [opensbi version] -k [openEuler version]
./scripts/build_opensbi.sh -v 1.2 -k 2003

Note: if you use the simpler way, please copy your latest kernel Image file to the root dir of the repo.

Build Penglai driver module

For openEuler version $\lt$ 23:

When openeuler version is less than 23,following the commands to build enclave driver:

./docker_cmd.sh docker
# In the docker image
./scripts/build_enclave_driver.sh

It will generate penglai.ko in the penglai-enclave-driver dir.

For openEuler version $\ge$ 23:

When openEuler version is >= 23, you need to start openEuler in qemu as the next step Run openEuler with Penglai Supports finished before compiling penglai-driver.

Build Penglai sdk

When penglai.ko is completed,following the commnads to build user-level sdk and demos:

#In host, fetch the sdk submodule
git submodule update --init --recursive

./docker_cmd.sh docker
# In the docker image
cd sdk
PENGLAI_SDK=$(pwd) make -j8

Run openEuler with Penglai Supports

You should download the disk image of openEuler (i.e., openEuler-preview.riscv64.qcow2) and raname image file to openEuler-xxxx-qemu-riscv64.qcow2.

You can download OE 2303 from openEuler-23.03-V1-riscv64(i.e., openEuler-23.03-V1-base-qemu-preview.qcow2)or download openEuler 20.03 from here.

wget https://mirror.iscas.ac.cn/openeuler-sig-riscv/openEuler-RISC-V/preview/openEuler-23.03-V1-riscv64/QEMU/openEuler-23.03-V1-base-qemu-preview.qcow2.zst
unzstd openEuler-23.03-V1-base-qemu-preview.qcow2.zst
mv openEuler-23.03-V1-base-qemu-preview.qcow2 openEuler-2303-qemu-riscv64.qcow2

For openEuler version $\lt$ 23:

Run VM in QEMU:

# For openEuler version is 20.03
qemu-system-riscv64 -nographic -machine virt \
					-smp 4 -m 2G \
					-kernel  ./opensbi-0.9/build-oe/qemu-virt/platform/generic/firmware/fw_payload.elf  \
					-drive file=openEuler-preview.riscv64.qcow2,format=qcow2,id=hd0 \
					-object rng-random,filename=/dev/urandom,id=rng0 \
					-device virtio-rng-device,rng=rng0 \
					-device virtio-blk-device,drive=hd0  \
					-device virtio-net-device,netdev=usernet \
					-netdev user,id=usernet,hostfwd=tcp::12055-:22 \
					-append 'root=/dev/vda1 rw console=ttyS0 systemd.default_timeout_start_sec=600 selinux=0 highres=off mem=4096M earlycon' \
					-bios none
  • The test qemu version is 5.2.0 or 8.0.0.
  • The fw_payload.elf is the opensbi file.
  • The openEuler-preview.riscv64.qcow2 is the disk image for openEuler (You can download from https://repo.openeuler.org/openEuler-preview/RISC-V/).
  • To login, username is "root", passwd is "openEuler12#$"

Note: a script, run_openeuler.sh is provided to execute the above command easily

./run_openeuler.sh -k [openEuler version] -o [opensbi version]
#when openEuler version less than 23,eg 2003
./run_openeuler.sh -k 2003 -o 1.2

If everything is fine, you will enter a Linux terminal booted by Qemu with Penglai-installed.

For openEuler version $\ge$ 23:

Run VM in QEMU:

qemu-system-riscv64 -nographic -machine virt \
			-smp 4 -m 2G \
			-bios  ./opensbi-1.2/build-oe/qemu-virt/platform/generic/firmware/fw_payload.bin  \
			-drive file=openEuler-2303-qemu-riscv64.qcow2,format=qcow2,id=hd0 \
			-object rng-random,filename=/dev/urandom,id=rng0 \
			-device virtio-rng-device,rng=rng0 \
			-device virtio-blk-device,drive=hd0  \
			-device virtio-net-device,netdev=usernet \
			-netdev user,id=usernet,hostfwd=tcp::12055-:22 \
			-device qemu-xhci -usb -device usb-kbd -device usb-tablet

Once started, you should execut the following command to obtain the kernel module compilation environment. Execute the following commands and the kernel source code will be downloaded locally, the path is /usr/lib/modules/6.1.19-2.oe2303.riscv64(For openEuler 2303).

#in VM
cd ~/
dnf install -y kernel-devel kernel-source

a simple way:

./run_openeuler.sh -k [openEuler version] -o [opensbi version]
#when openEuler version is greater than or equal 23,eg 2303
./run_openeuler.sh -k 2303 -o 1.2

RUN demo

For openEuler version $\lt$ 23:

Copy files to openEuler Qemu

You can copy any files to the VM using scp.

For example, to run the following demo, you should:

#For version 23, there is no need to copy penglai.ko
scp -P 12055 penglai-enclave-driver/penglai.ko root@localhost:~/
scp -P 12055 sdk/demo/host/host root@localhost:~/
scp -P 12055 sdk/demo/prime/prime root@localhost:~/

The passwd is "openEuler12#$"

For openEuler version $\ge$ 23:

After starting the VM, you need to get the source code in the qemu VM and execute compile kernel moudle with penglai-driver for openEuler version $\ge$ 23.

Copy penglai-enclave-driver to the root/ directory of the oe VM:

#in host
scp -P 12055 -r penglai-enclave-driver root@localhost:~/
scp -P 12055 sdk/demo/host/host root@localhost:~/
scp -P 12055 sdk/demo/prime/prime root@localhost:~/

Go into the penglai-enclave-driver directory and modify the original kernel source path openeuler-kernel in the Makefile from ../openeuler-kernel/to /usr/lib/modules/$(shell uname -r)/build/.

Compile and install the kernel module:

cd ~/penglai-enclave-driver
#modify source path
sed -i 's|make -C ../openeuler-kernel/ ARCH=riscv M=$(PWD) modules|make -C /usr/lib/modules/$(shell uname -r)/build ARCH=riscv M=$(PWD) modules|' Makefile > /dev/null 2>&1
make -j$(nproc)
insmod penglai.ko

Insmod the enclave-driver

If you already installed in the previous step, you don't need to repeat it

cd ~/
insmod penglai.ko

And the, you can run a demo, e.g., a prime enclave, using

./host  prime

Here, the host is an enclave invoker, which will start an enclave (name from input).

License Details

Mulan Permissive Software License,Version 1 (Mulan PSL v1)

Code Structures

  • opensbi-0.9: The Penglai-equipped OpenSBI, version 0.9
  • opensbi-1.0: The Penglai-equipped OpenSBI, version 1.0
  • opensbi-1.2: The Penglai-equipped OpenSBI, version 1.2
  • openeuler-kernel: openEuler Kernel
  • riscv-qemu: The modified qemu (4.1) to support sPMP (you can also use the standard qemu)
  • scripts: some scripts to build/run Penglai demo

Code Contributions

Please fell free to post your concerns, ideas, code or anything others to issues.

Document and Tutorial

Please refer our readthedocs page for documents.

Cite

To cite Penglai, please consider using the following bibtex:

@inproceedings {273705,
	author = {Erhu Feng and Xu Lu and Dong Du and Bicheng Yang and Xueqiang Jiang and Yubin Xia and Binyu Zang and Haibo Chen},
	title = {Scalable Memory Protection in the {PENGLAI} Enclave},
	booktitle = {15th {USENIX} Symposium on Operating Systems Design and Implementation ({OSDI} 21)},
	year = {2021},
	isbn = {978-1-939133-22-9},
	pages = {275--294},
	url = {https://www.usenix.org/conference/osdi21/presentation/feng},
	publisher = {{USENIX} Association},
	month = jul,
}

Collaborators

We thank all of our collaborators (companies, organizations, and communities).

Huawei nuclei StarFive ISCAS
Huawei (华为) Nuclei (芯来科技) StarFive (赛昉科技) ISCAS(中科院软件所)
openEuler OpenHarmony secGear
openEuler community OpenHarmony community secGear framework

Acknowledgements

The design of Penglai was inspired by Sanctum, Keystone and HexFive, thanks to their great work!