PowerMTA4 Watcher

Why PowerMTA4 Watcher ?

it Help You TO CONSERVE your sever from being blacklisted fastely , BY Alerting you when the 1 of the 2 rates ( or both ) is less than the minimum wanted.

By This Action , you gain not only the server Reputation , but also Money ( You don't need to buy a lot of servers ) and Time ( you don't need to watch the process all the day ).

How it work ?

1. You Choose a row
2. You Give The Name to the server ( because ,in general cases; it isn't easy to remember the details about the IP ( the provider , the role of this server , some characteristics of this server ...) . Specially if you have a lot of servers , so giving name can help too much !! )
3. you fill the IP/DNS box with the ip/dns of your server
4. you fill the Port box with the port of your server ( The Port is inevitable )
5. you fill the S/H(%) box with the minimum percentage to be reached. This percentage will be compared to the ratio: OUT/IN x 100 whose values are taken from the line of the last hour - as you can see in the image below - (this value can be for example 90%: which means that the percentage of the message actually sent compared to those you try to send is 90%). So all you have to do , is just to write the percentage you don't want to go below.

6. you fill the total(%) box with the minimum percentage to be reached. This percentage will be compared to the ratio: OUT/IN x 100 whose values are taken from the line of total - as you can see in the image below - (this value can be for example 90%: which means that the percentage of the message actually sent compared to those you try to send is 90%). So all you have to do , is just to write the percentage you don't want to go below.

7. you fill the Link box with the link that you want to be redirected to it if 1 of the 2 tests fails (the one of S/H(%) and/or total(%)) 8. you fill the Refresh box with the number of seconds that you want to wait between every check . Note that , the recommended value is 5 . <!> ALERT : Below this value , you risk to have a high consumption of Memory / Cpu Ress . So be aware ! ( if you let it empty , it gonna take 1s between every check , because the default value is : 1 ) 9. click "START" : To Start The process of watching 10. If you want to stop the process at any time , click "STOP" . 11. Click "RESET" to stop the process and to delete all the content of all the textboxes in the row .

Steps to use it ?

1. install all dependencies : ( do it just 1 time , if already done it , go to Step 2 )

pip install -r requirements.txt

2. Do All Steps in How it work ? ( above )
3. ENJOY !

For Windows User ( How to Deploy )

1. install pyinstaller

pip install pyinstaller

2. Open The file "main.spec" and change the path "E:\mailing\3. PMTA Watcher\" to the absolute path where the application is !
3. run cmd in the same folder as the project ( where application.py exist ) and run :

pyinstaller main.spec

4. Go to the folder /dist and run .exe
5. Enjoy !