Localization: Update languages from Transifex

www/locale/af.js

@@ -87,8 +87,11 @@
    "Detect baseline ETo": "Bespeur basislyn ETo",
    "Current Weather": "Huidige Weer",
    "Do you want to turn off rain delay?": "Wil jy die reënvertraging afskakel?",
+   "Powered by Apple": "",
    "Powered by Dark Sky": "Aangedryf deur Dark Sky",
    "Powered by OpenWeather": "Aangedryf deur OpenWeather",
+   "Powered by Bright Sky+DWD": "",
+   "Powered by Open Meteo": "",
    "Powered by Weather Underground": "Aangedryf deur Weather Underground",
    "Powered by your Local PWS": "Aangedryf deur jou plaaslike PWS",
    "Using manual watering": "Handbeheerde watertoediening in gebruik",
@@ -315,6 +318,8 @@
    "Pause Station Runs": "",
    "Run-Once Program": "Eenmalige Program",
    "Edit Programs": "Wysig Programme",
+   "Analog Sensor Config": "",
+   "Show Sensor Log": "",
    "Manual Control": "Handbeheer",
    "Hide": "Versteek",
    "Show": "Wys",
@@ -442,7 +447,7 @@
    "No entries found in the selected date range": "Geen inskrywings in the gegewe tydperk nie",
    "Error retrieving log data. Please refresh to try again.": "Fout met die lees van die logboek, verfris logboek om weer te probeer.",
    "Start time cannot be greater than end time": "Die begin-tyd kan nie later as die eind-tyd wees nie",
-   "The requested time span exceeds the maxiumum of 1 year and has been adjusted": "Die tydsduurversoek oorskry die maksimum perk van 1 jaar en is aangepas",
+   "The requested time span exceeds the maximum of 1 year and has been adjusted": "",
    "Logs": "Logboek",
    "Are you sure you want to clear ALL your log data?": "Is jy seker jy wil alle logboek data uitvee?",
    "Logs have been cleared": "Logboek is uitgevee.",
@@ -570,7 +575,7 @@
    "Please enter your OpenSprinkler.com password. If you have recently changed your password, you may need to enter your previous password to decrypt the data.": "Voer asb jou OpenSprinkler.com wagwoord in. As jy onlangs jou wagwoord verander het mag jy moontlik jou ou wagwoord moet gebruik om die data te dekripteer.",
    "Unused Expanders Detected": "Ongebruikte Uitbreiders Bespeur",
    "Click here to enable all connected stations.": "Druk hier om alle gekonnekteerde stasies in werking te stel.",
-   "Unified firmware is now avaialble": "Verenigde fermware is nou beskikbaar",
+   "Unified firmware is now available": "",
    "Click here for more details": "Druk hier vir meer besonderhede",
    "Remote access is not enabled": "Afstandstoegang is nie aangeskakel nie",
    "Click here to troubleshoot remote access issues": "Druk hier om afstandstoegang probleme op te los",
@@ -659,6 +664,57 @@
    "second": "sekonde",
    "In": "In",
    "ago": "gelede",
+   "Edit Program Adjustment": "",
+   "New Program Adjustment": "",
+   "Notice: If you want to combine multiple sensors, then build a sensor group. ": "",
+   "See help documentation for details.": "",
+   "Adjustment-Nr": "",
+   "Program to adjust": "",
+   "Factor 1 (adjustment for min)": "",
+   "Factor 2 (adjustment for max)": "",
+   "Min sensor value": "",
+   "Max sensor value": "",
+   "Edit Sensor": "",
+   "New Sensor": "",
+   "Edit Sensor Configuration. ": "",
+   "Sensor-Nr": "",
+   "Set SMT100 Modbus ID": "",
+   "Group": "",
+   "Name": "",
+   "ID": "",
+   "Read Interval (s)": "",
+   "Sensor Enabled": "",
+   "Enable Data Logging": "",
+   "Show on Main Page": "",
+   "This function sets the Modbus ID for one SMT100 sensor. Disconnect all other sensors on this Modbus port. Please confirm.": "",
+   "SMT100 id assigned!": "",
+   "Sensor number exists!": "",
+   "Are you sure you want to delete the sensor?": "",
+   "Are you sure you want to delete this program adjustment?": "",
+   "Are you sure you want to clear the sensor log?": "",
+   "Log cleared:": "",
+   "records": "",
+   "Edit": "",
+   "Add Sensor": "",
+   "Refresh Sensor data": "",
+   "Add program adjustment": "",
+   "Clear Log": "",
+   "Download Log": "",
+   "Show Log": "",
+   "Analog Sensor Log": "",
+   "last 24h": "",
+   "last weeks": "",
+   "last months": "",
+   "Soil moisture": "",
+   "degree celsius temperature": "",
+   "Temperature": "",
+   "degree fahrenheit temperature": "",
+   "Volt": "",
+   "Voltage": "",
+   "Air Humidity": "",
+   "Rainfall": "",
+   "Wind": "",
+   "Level": "",
    "Export Configuration": "Voer Opstelling Uit",
    "Import Configuration": "Voer Opstelling In",
    "Help & Support": "Hulp en Ondersteuning",

www/locale/am.js

@@ -87,8 +87,11 @@
    "Detect baseline ETo": "",
    "Current Weather": "",
    "Do you want to turn off rain delay?": "በምክንያት መቆየት ይቅር ?",
+   "Powered by Apple": "",
    "Powered by Dark Sky": "",
    "Powered by OpenWeather": "",
+   "Powered by Bright Sky+DWD": "",
+   "Powered by Open Meteo": "",
    "Powered by Weather Underground": "",
    "Powered by your Local PWS": "",
    "Using manual watering": "",
@@ -315,6 +318,8 @@
    "Pause Station Runs": "",
    "Run-Once Program": "እቅድን አንዴ በቻ አስኪድ ",
    "Edit Programs": "እቅድን /ነካካ ",
+   "Analog Sensor Config": "",
+   "Show Sensor Log": "",
    "Manual Control": "በሰውኛ ተቆጣጠር ",
    "Hide": "",
    "Show": "",
@@ -442,7 +447,7 @@
    "No entries found in the selected date range": "በተባለው ቀን ውስጥ የገባ መረጃ የለም ",
    "Error retrieving log data. Please refresh to try again.": "",
    "Start time cannot be greater than end time": "መጀመሪያ ሰዓት ከማለቂያ ሊበልጥ አይችልም ",
-   "The requested time span exceeds the maxiumum of 1 year and has been adjusted": "የመቆያ ጊዜው ከአንድ አመት ስለበለጠ ተቃኝቷል ",
+   "The requested time span exceeds the maximum of 1 year and has been adjusted": "",
    "Logs": "ታቅደው የነበሩ ",
    "Are you sure you want to clear ALL your log data?": "የተመረጡትን ጣቢያዎች ማቆም ትፈልጋለክ ? ",
    "Logs have been cleared": "በፊት የገቡት ፀድተዋል",
@@ -570,7 +575,7 @@
    "Please enter your OpenSprinkler.com password. If you have recently changed your password, you may need to enter your previous password to decrypt the data.": "",
    "Unused Expanders Detected": "",
    "Click here to enable all connected stations.": "",
-   "Unified firmware is now avaialble": "",
+   "Unified firmware is now available": "",
    "Click here for more details": "",
    "Remote access is not enabled": "",
    "Click here to troubleshoot remote access issues": "",
@@ -659,6 +664,57 @@
    "second": "",
    "In": "",
    "ago": "",
+   "Edit Program Adjustment": "",
+   "New Program Adjustment": "",
+   "Notice: If you want to combine multiple sensors, then build a sensor group. ": "",
+   "See help documentation for details.": "",
+   "Adjustment-Nr": "",
+   "Program to adjust": "",
+   "Factor 1 (adjustment for min)": "",
+   "Factor 2 (adjustment for max)": "",
+   "Min sensor value": "",
+   "Max sensor value": "",
+   "Edit Sensor": "",
+   "New Sensor": "",
+   "Edit Sensor Configuration. ": "",
+   "Sensor-Nr": "",
+   "Set SMT100 Modbus ID": "",
+   "Group": "",
+   "Name": "",
+   "ID": "",
+   "Read Interval (s)": "",
+   "Sensor Enabled": "",
+   "Enable Data Logging": "",
+   "Show on Main Page": "",
+   "This function sets the Modbus ID for one SMT100 sensor. Disconnect all other sensors on this Modbus port. Please confirm.": "",
+   "SMT100 id assigned!": "",
+   "Sensor number exists!": "",
+   "Are you sure you want to delete the sensor?": "",
+   "Are you sure you want to delete this program adjustment?": "",
+   "Are you sure you want to clear the sensor log?": "",
+   "Log cleared:": "",
+   "records": "",
+   "Edit": "",
+   "Add Sensor": "",
+   "Refresh Sensor data": "",
+   "Add program adjustment": "",
+   "Clear Log": "",
+   "Download Log": "",
+   "Show Log": "",
+   "Analog Sensor Log": "",
+   "last 24h": "",
+   "last weeks": "",
+   "last months": "",
+   "Soil moisture": "",
+   "degree celsius temperature": "",
+   "Temperature": "",
+   "degree fahrenheit temperature": "",
+   "Volt": "",
+   "Voltage": "",
+   "Air Humidity": "",
+   "Rainfall": "",
+   "Wind": "",
+   "Level": "",
    "Export Configuration": "ቅኝቱን ላክ",
    "Import Configuration": "ቅኝቱን አምጣ ",
    "Help & Support": "መረጃና መርጃ ",

www/locale/bg.js

@@ -87,8 +87,11 @@
    "Detect baseline ETo": "",
    "Current Weather": "",
    "Do you want to turn off rain delay?": "Искате ли да изключите закъснението поради дъжд?",
+   "Powered by Apple": "",
    "Powered by Dark Sky": "",
    "Powered by OpenWeather": "",
+   "Powered by Bright Sky+DWD": "",
+   "Powered by Open Meteo": "",
    "Powered by Weather Underground": "",
    "Powered by your Local PWS": "",
    "Using manual watering": "",
@@ -315,6 +318,8 @@
    "Pause Station Runs": "",
    "Run-Once Program": "Еднократна програма",
    "Edit Programs": "Редакция на програми",
+   "Analog Sensor Config": "",
+   "Show Sensor Log": "",
    "Manual Control": "Ръчен контрол",
    "Hide": "Скрий",
    "Show": "Покажи",
@@ -442,7 +447,7 @@
    "No entries found in the selected date range": "Няма намерени записи в избрания период",
    "Error retrieving log data. Please refresh to try again.": "Грешка при извличане на историята за събитията. Моля, опреснете, за да опитате отново.",
    "Start time cannot be greater than end time": "Началното време не може да бъде по-голямо от крайното време",
-   "The requested time span exceeds the maxiumum of 1 year and has been adjusted": "Исканият период от време надвишава максимума от 1 година и е коригиран",
+   "The requested time span exceeds the maximum of 1 year and has been adjusted": "",
    "Logs": "Логове",
    "Are you sure you want to clear ALL your log data?": "Наистина ли искате да изтриете ВСИЧКИ данни от логовете?",
    "Logs have been cleared": "Логовете са изтрити",
@@ -570,7 +575,7 @@
    "Please enter your OpenSprinkler.com password. If you have recently changed your password, you may need to enter your previous password to decrypt the data.": "Моля, въведете паролата си за OpenSprinkler.com. Ако наскоро сте променили паролата си, може да се наложи да въведете предишната си парола, за да декриптирате данните.",
    "Unused Expanders Detected": "",
    "Click here to enable all connected stations.": "Кликнете тук, за да активирате всички свързани станции.",
-   "Unified firmware is now avaialble": "",
+   "Unified firmware is now available": "",
    "Click here for more details": "",
    "Remote access is not enabled": "Дистанционен достъп не е активиран",
    "Click here to troubleshoot remote access issues": "Кликнете тук, за да отстраните проблеми с дистанционния  достъп",
@@ -659,6 +664,57 @@
    "second": "",
    "In": "",
    "ago": "",
+   "Edit Program Adjustment": "",
+   "New Program Adjustment": "",
+   "Notice: If you want to combine multiple sensors, then build a sensor group. ": "",
+   "See help documentation for details.": "",
+   "Adjustment-Nr": "",
+   "Program to adjust": "",
+   "Factor 1 (adjustment for min)": "",
+   "Factor 2 (adjustment for max)": "",
+   "Min sensor value": "",
+   "Max sensor value": "",
+   "Edit Sensor": "",
+   "New Sensor": "",
+   "Edit Sensor Configuration. ": "",
+   "Sensor-Nr": "",
+   "Set SMT100 Modbus ID": "",
+   "Group": "",
+   "Name": "",
+   "ID": "",
+   "Read Interval (s)": "",
+   "Sensor Enabled": "",
+   "Enable Data Logging": "",
+   "Show on Main Page": "",
+   "This function sets the Modbus ID for one SMT100 sensor. Disconnect all other sensors on this Modbus port. Please confirm.": "",
+   "SMT100 id assigned!": "",
+   "Sensor number exists!": "",
+   "Are you sure you want to delete the sensor?": "",
+   "Are you sure you want to delete this program adjustment?": "",
+   "Are you sure you want to clear the sensor log?": "",
+   "Log cleared:": "",
+   "records": "",
+   "Edit": "",
+   "Add Sensor": "",
+   "Refresh Sensor data": "",
+   "Add program adjustment": "",
+   "Clear Log": "",
+   "Download Log": "",
+   "Show Log": "",
+   "Analog Sensor Log": "",
+   "last 24h": "",
+   "last weeks": "",
+   "last months": "",
+   "Soil moisture": "",
+   "degree celsius temperature": "",
+   "Temperature": "",
+   "degree fahrenheit temperature": "",
+   "Volt": "",
+   "Voltage": "",
+   "Air Humidity": "",
+   "Rainfall": "",
+   "Wind": "",
+   "Level": "",
    "Export Configuration": "Експортиране на конфигурация",
    "Import Configuration": "Импортиране на конфигурация",
    "Help & Support": "Помощ & Поддръжка",

www/locale/cs.js

@@ -87,8 +87,11 @@
    "Detect baseline ETo": "",
    "Current Weather": "",
    "Do you want to turn off rain delay?": "Chcete vypnout dešťové zpoždění?",
+   "Powered by Apple": "",
    "Powered by Dark Sky": "",
    "Powered by OpenWeather": "",
+   "Powered by Bright Sky+DWD": "",
+   "Powered by Open Meteo": "",
    "Powered by Weather Underground": "",
    "Powered by your Local PWS": "",
    "Using manual watering": "",
@@ -315,6 +318,8 @@
    "Pause Station Runs": "",
    "Run-Once Program": "Jednorázový program",
    "Edit Programs": "Úprava programu",
+   "Analog Sensor Config": "",
+   "Show Sensor Log": "",
    "Manual Control": "Manuální ovládání",
    "Hide": "Skrýt",
    "Show": "Zobrazit",
@@ -442,7 +447,7 @@
    "No entries found in the selected date range": "Žádná položka nebyla nalezena v tomto rozsahu",
    "Error retrieving log data. Please refresh to try again.": "Chyba příjem dat logu. Prosím opakujte.",
    "Start time cannot be greater than end time": "Čas začátku nemůže být větší než čas konce",
-   "The requested time span exceeds the maxiumum of 1 year and has been adjusted": "Požadovaná doba rozsahu přesahuje maximum 1 rok a byla upravena",
+   "The requested time span exceeds the maximum of 1 year and has been adjusted": "",
    "Logs": "Záznam",
    "Are you sure you want to clear ALL your log data?": "Opravdu chcete smazat všechny záznamy v logu?",
    "Logs have been cleared": "Záznamy jsou smazány",
@@ -570,7 +575,7 @@
    "Please enter your OpenSprinkler.com password. If you have recently changed your password, you may need to enter your previous password to decrypt the data.": "Prosím, zadejte svoje OpenSprinkler.com heslo. Pokud jste nedávno změnil heslo, budete muset zadat své předchozí heslo k dešifrování dat.",
    "Unused Expanders Detected": "",
    "Click here to enable all connected stations.": "",
-   "Unified firmware is now avaialble": "Sjednocený firmware je nyní k dispozici",
+   "Unified firmware is now available": "",
    "Click here for more details": "Klikněte zde pro další informace",
    "Remote access is not enabled": "Vzdálený přístup není povolen",
    "Click here to troubleshoot remote access issues": "Klikněte zde pro řešení problémů vzdáleného přístupu",
@@ -659,6 +664,57 @@
    "second": "",
    "In": "",
    "ago": "",
+   "Edit Program Adjustment": "",
+   "New Program Adjustment": "",
+   "Notice: If you want to combine multiple sensors, then build a sensor group. ": "",
+   "See help documentation for details.": "",
+   "Adjustment-Nr": "",
+   "Program to adjust": "",
+   "Factor 1 (adjustment for min)": "",
+   "Factor 2 (adjustment for max)": "",
+   "Min sensor value": "",
+   "Max sensor value": "",
+   "Edit Sensor": "",
+   "New Sensor": "",
+   "Edit Sensor Configuration. ": "",
+   "Sensor-Nr": "",
+   "Set SMT100 Modbus ID": "",
+   "Group": "",
+   "Name": "",
+   "ID": "",
+   "Read Interval (s)": "",
+   "Sensor Enabled": "",
+   "Enable Data Logging": "",
+   "Show on Main Page": "",
+   "This function sets the Modbus ID for one SMT100 sensor. Disconnect all other sensors on this Modbus port. Please confirm.": "",
+   "SMT100 id assigned!": "",
+   "Sensor number exists!": "",
+   "Are you sure you want to delete the sensor?": "",
+   "Are you sure you want to delete this program adjustment?": "",
+   "Are you sure you want to clear the sensor log?": "",
+   "Log cleared:": "",
+   "records": "",
+   "Edit": "",
+   "Add Sensor": "",
+   "Refresh Sensor data": "",
+   "Add program adjustment": "",
+   "Clear Log": "",
+   "Download Log": "",
+   "Show Log": "",
+   "Analog Sensor Log": "",
+   "last 24h": "",
+   "last weeks": "",
+   "last months": "",
+   "Soil moisture": "",
+   "degree celsius temperature": "",
+   "Temperature": "",
+   "degree fahrenheit temperature": "",
+   "Volt": "",
+   "Voltage": "",
+   "Air Humidity": "",
+   "Rainfall": "",
+   "Wind": "",
+   "Level": "",
    "Export Configuration": "Export nastavení",
    "Import Configuration": "Import nastavení",
    "Help & Support": "Nápověda a podpora",