Skip to content

MouChiaHung/Khadas

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

12 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Khadas VIM3 running SPI device MAX6675

For the newest commit of fenix these steps works for me to have /dev/spidev1.0 based on https://forum.khadas.com/t/vim3-ubuntu-spi/9372/2?u=chiahungmou and suggestions above.

1.Modify /fenix/linux/arch/arm64/boot/dts/amlogic/kvim3_linux.dts b/arch/arm64/boot/dts/amlogic/kvim3_linux.dts as below:

 &pwm_ef {
		status = "okay";
		pinctrl-names = "default";
		pinctrl-0 = <&pwm_f_pins1>;
 };

 ...	 

 &spicc1 {
		status = "enable";
		pinctrl-names = "default";
		pinctrl-0 = <&spicc1_pins>;
		cs-gpios = <&gpio GPIOH_6 0>;
 ...
  1. Run make kernel && make debs && make

  2. Replace /boot/zImage and /boot/dtb/kvim3_linux.dtb with Image and kvim3_linux.dtb which are built at step 2.

    $scp ./fenix/linux/arch/arm64/boot/Image khadas@192.168.XXX.XXX:/tmp
    $scp ./fenix/linux/arch/arm64/boot/dts/amlogic/kvim3_linux.dtb  khadas@192.168.XXX.XXX:/tmp
    $ssh khadas@192.168.XXX.XXX
    $sudo mv /tmp/Image /boot/zImage
    $sudo mv /tmp/kvim3_linux.dtb /boot/dtb
    
  3. Update device tree overlay.

    vim /boot/env.txt to change this line: overlays=uart3 i2c3 os08a10 spi1

5.WiringPi check gpio.

`	khadas@Khadas:~$ gpio readall
 +------+-----+----------+------+---+----+---- Model  Khadas VIM3 --+----+---+------+----------+-----+------+
 | GPIO | wPi |   Name   | Mode | V | DS | PU/PD | Physical | PU/PD | DS | V | Mode |   Name   | wPi | GPIO |
 +------+-----+----------+------+---+----+-------+----++----+-------+----+---+------+----------+-----+------+
 |      |     |       5V |      |   |    |       |  1 || 21 |       |    |   |      | GND      |     |      |
 |      |     |       5V |      |   |    |       |  2 || 22 | P/U   |    | 1 | ALT1 | PIN.A15  | 6   |  475 |
 |      |     |   USB_DM |      |   |    |       |  3 || 23 | P/U   |    | 1 | ALT1 | PIN.A14  | 7   |  474 |
 |      |     |   USB_DP |      |   |    |       |  4 || 24 |       |    |   |      | GND      |     |      |
 |      |     |      GND |      |   |    |       |  5 || 25 | P/U   |    | 1 | ALT0 | PIN.AO2  | 8   |  498 |
 |      |     |   MCU3V3 |      |   |    |       |  6 || 26 | P/U   |    | 1 | ALT0 | PIN.AO3  | 9   |  499 |
 |      |     |  MCUNRST |      |   |    |       |  7 || 27 |       |    |   |      | 3V3      |     |      |
 |      |     |  MCUSWIM |      |   |    |       |  8 || 28 |       |    |   |      | GND      |     |      |
 |      |     |      GND |      |   |    |       |  9 || 29 | P/D   |    | 0 | ALT0 | PIN.A1   | 10  |  461 |
 |      |  18 |     ADC0 |      |   |    |       | 10 || 30 | P/D   |    | 1 | ALT0 | PIN.A0   | 11  |  460 |
 |      |     |      1V8 |      |   |    |       | 11 || 31 | P/D   |    | 0 | ALT0 | PIN.A3   | 12  |  463 |
 |      |  19 |     ADC1 |      |   |    |       | 12 || 32 | P/D   |    | 0 | ALT0 | PIN.A2   | 13  |  462 |
 |  506 |   1 | PIN.AO10 | ALT3 | 0 |    |   P/U | 13 || 33 | P/D   |    | 0 | ALT1 | PIN.A4   | 14  |  464 |
 |      |     |     GND3 |      |   |    |       | 14 || 34 |       |    |   |      | GND      |     |      |
 |  433 |   2 |   PIN.H6 |  OUT | 1 |    |   P/D | 15 || 35 | P/D   |    | 0 | ALT2 | PWM-F    | 15  |  432 |
 |  434 |   3 |   PIN.H7 | ALT2 | 0 |    |   P/D | 16 || 36 |       |    |   |      | RTC      |     |      |
 |      |     |      GND |      |   |    |       | 17 || 37 | P/D   |    | 0 | ALT2 | PIN.H4   | 16  |  431 |
 |  497 |   4 |  PIN.AO1 | ALT0 | 1 |    |   P/U | 18 || 38 |       |    |   |      | MCU-FA1  |     |      |
 |  496 |   5 |  PIN.AO0 | ALT0 | 1 |    |   P/U | 19 || 39 | P/D   |    | 0 | IN   | PIN.Z15  | 17  |  426 |
 |      |     |      3V3 |      |   |    |       | 20 || 40 |       |    |   |      | GND      |     |      |
 +------+-----+----------+------+---+----+-------+----++----+-------+----+---+------+----------+-----+------+

 `
  1. Check pins related to SPI.

    VIM3 SPI:
    PIN37: GPIOH_4/SPIB_MOSI  -> type ALT2
    PIN35: PWM_F/SPIB_MISO    -> type ALT2
    PIN15: UARTC_RX/SPIB_SS   -> type OUT
    PIN16: UARTC_TX/SPIB_SCLK -> type ALT2
    
  2. Build tester and run.

    cd /WiringPi_khadas/examples
    make spi_test_vim3
    ./spi_test_vim3
    

MAX6675 reading temperature

image

image

Note

This is an unofficial mirror of WiringPi to support ports (Python/Ruby/etc).

Please do not email Gordon if you have issues, he will not be able to help.

Pull-requests are not currently accepted, since this is a mirror.

For support, comments, questions, etc please join the WiringPi Discord channel: https://discord.gg/SM4WUVG

wiringPi README

Please note that the official way to get wiringPi is via git from git.drogon.net and not GitHub.

ie.

git clone git://git.drogon.net/wiringPi

The version of wiringPi held on GitHub by "Gadgetoid" is used to build the wiringPython, Ruby, Perl, etc. wrappers for these other languages. This version may lag the official Drogon release. Pull requests may not be accepted to Github....

Please see

http://wiringpi.com/

for the official documentation, etc. and the best way to submit bug reports, etc. is by sending an email to projects@drogon.net

Thanks!

-Gordon