Sturgeon is a CNS neural network classifier based on the reference dataset published by Capper et al., 2018.
For more information on the classifier please refer to our paper.
If you use Sturgeon, please cite our work and consider starring this repository 🌟
Vermeulen, C., Pagès-Gallego, M., Kester, L. et al. Ultra-fast deep-learned CNS tumour classification during surgery. Nature (2023). https://doi.org/10.1038/s41586-023-06615-2
Get the repository.
git clone https://github.com/marcpaga/sturgeon
To include the models directly to the installation path, download the desired models, see below for available models and links.
And the move the models:
cd sturgeon
mv DOWNLOADED_MODEL.zip sturgeon/include/models/DOWNLOADED_MODEL.zip
Otherwise, during prediction, you can just pass the path to the zip file.
Install Sturgeon.
cd sturgeon # if you haven't
python3 -m venv venv
source venv/bin/activate
python3 -m pip install --upgrade pip
pip3 install . --no-cache-dir
If you use a pre-compiled binary then there's no necessity for installation.
Model files are zip files with the an onnx model file and several other files with information about the classes and model calibration.
The following models are available:
-
This model contains a similar classification scheme (some classes are merged, see below) as Capper et al., 2018. This means that there are a total of 87 classes (9 control and 78 tumor classes).
-
We recommend to always use this model in parallel, even when using other models.
-
Score recommendations:
score < 0.8: inconclusive result. We recommend to wait for additional data; if not possible, consider the top3 highest scoring classes or their class families as whole.0.8 <= score < 0.95: confident result that the class is correct. If used during live sequencing, we recommend to wait for additional sequencing data so that the score gets higher, or the score is stable within this range (e.g several predictions like 0.82, 0.87, 0.84, ...).score >= 0.95: high confident result that the class is correct.
Download link: https://www.dropbox.com/s/yzca4exl40x9ukw/general.zip?dl=0
Merged classes (these are merged since the subtype differences are based on tumour location or age):
-
Embryonal - MB SHH - CHL AD INF merges: "Embryonal - MB SHH - CHL AD" and "Embryonal - MB SHH - INF"
-
Ependymal - SUBEPN - ALL merges: "Ependymal - SUBEPN - PF", "Ependymal - SUBEPN - SPINE" and "Ependymal - SUBEPN - ST"
-
Other glioma - LGG PA - PA merges: "Other glioma - LGG PA - PA MID" and "Other glioma - LGG PA - PA PF"
- This model constains a reduced number of classes (30) that can only occur in the brainstem region. Included in these classes are also the control classes and a
Other - Non brainstemclass. - We recommend to always use the general model in parallel with this one.
- This model is only meant to be used when the tumor is located in the brainstem.
- Score recommendations:
score < 0.95: inconclusive result. We recommend to wait for additional data; if not possible, consider the top3 highest scoring classes or their class families as whole.score >= 0.95: high confident result that the class is correct, but should be treated as inconclusive is the predicted class isOther - Non brainstem.
Download link: https://www.dropbox.com/s/55hypw7i8tidr0a/brainstem.zip?dl=0
This program has four main utilities:
inputtobed: convert input files from Guppy (bam) or from Megalodon (txt), to bed files suitable to be used for prediction using this tool.predict: predict the CNS type from an input file(s) in bed format.live: watch over an output folder where output files are written live. Then convert and predict them as they come. This is meant to be used during live sequencing.models: list, add and delete models. Not strictly necessary, as models can be passed to the previous utilities by path. Ignore for binary programs.
Once launched, a log file will be created in the logs folder. The location of that folder will be dependent from the current working directory (from where the tool is executed).
Please refer to each utility --help for additional info.
- Guppy can output bam index files (.bai), do NOT use those, they are not compatible. Either provide them via
samtoolsor do not provide them. This program comes with pysam and will create the index files itself. - Prediction relies on proper mapping of the methylation calls. This program expects that the reads have aligned to the T2T reference genome v2.0. We also support alignment to
hg38, but have NOT throughly tested it. - While this tool can be run with the output from Guppy or Megalodon, we found that the methylation calls from Megalodon work best and we therefore recommend it for optimal results.
Convert input files (bam or txt) to bed files that can be used as input to predict the CNS type.
It is critical that the data is correctly aligned to a reference genome, otherwise the results will be wrong. We have used the Telomere-to-telomere reference genome (CHM13v2) for all of our work, and it is the default setting for this program. We encourage you to also use it, as we have not thoroughly tested other reference genomes. If you have aligned your data to hg38, we encourage you to re-align (or "lift it" with CrossMap) it to the T2T reference genome. If you still prefer to use hg38, then you can pass --reference-genome hg38 to use the correct probe coordinates. The hg38 coordinates have been generated via liftover, this lead to the loss of 26 out of 427680 probes.
If you have bam files that contain modifications basecalled with Guppy or Dorado, this is the recommended option. You will have to install modkit, the official ONT tool to extract modifications. Once installed, given a bam file you should do the following:
- (optional) If, besides 5mC you also have 5hmC modification calls, you should add them up via:
modkit adjust-mods --convert h m INPUT.bam OUTPUT.bam
The reasoning behind this is that both 5mC and 5hmC poorly react to bisulfite treatment Huang et al., 2010, therefore 5hmC sites would appear as 5mC in a methylation microarray experiment. We trained on those kind of experiments, we therefore think that adding the two scores up reflects the most the training data.
- You can then extract the 5mC scores using:
modkit extract OUTPUT.bam OUTPUT.txt
This OUTPUT.txt can then be directly used in sturgeon using:
sturgeon inputtobed -i MODKIT_OUTPUT_DIR -o OUTPUT_DIR -s modkit
Please note that Sturgeon will only use 5mC scores, other modification scores will be filtered out. Please refer to the modkit wiki in case these commands change.
Please strongly consider using modkit, to extract methylation calls from bam files from guppy we rely on modbampy, which is currently deprecated. Updates to guppy might break modbampy compatibility and could give WRONG results.
Convert a bam that contains methylation calls into the adequate format (.bed) so that it can be used for prediction.
To obtain bam files from Guppy you can add the following arguments:
.guppy_basecaller \
--config dna_r9.4.1_e8.1_modbases_5mc_cg_hac.cfg \
--bam_out \
--align_ref chm13v2.0.fa
Do NOT pass the --index flag to get index files, these index files are not compatible.
Also remember to pass the T2T reference genome v2.0 as reference for alignment.
Convert bam to bed example with demo data:
sturgeon inputtobed -i demo/bam -o demo/bam/out -s guppy
In demo/bam/out you should have some output files, the most important one is merged_probes_methyl_calls.bed as it is the input for the prediction tool. This input contains the aggregation of all methylation calls across ALL bam files. If each bam file is a different sample, then process them independently in different folders.
sturgeon inputtobed -i demo/bam/example_1.bam -o demo/bam/out_1 -s guppy
sturgeon inputtobed -i demo/bam/example_2.bam -o demo/bam/out_2 -s guppy
sturgeon inputtobed -i demo/bam/example_3.bam -o demo/bam/out_3 -s guppy
Please strongly consider using modkit, to extract methylation calls since megalodon is deprecated by ONT.
Convert a txt file that contains per read methylation calls into the adequate format (.bed) so that it can be used for prediction.
To obtain the txt files you can run megalodon with the following arguments:
./megalodon YOUR_FAST5_PATH \
--outputs mods basecalls mappings \
--mappings-format bam \
--reference chm13v2.0.fa \
--write-mods-text \
--mod-motif m CG 0 \
--processes 10 \
--guppy-config res_dna_r941_prom_modbases_5mC_CpG_v001.cfg \
--devices cuda:0 \
--output-directory YOUR_OUTPUT_PATH
For further information on how to run megalodon please refer to their github page.
Convert txt files from demo data:
sturgeon inputtobed -i demo/mega -o demo/mega/out -s megalodon
In demo/mega/out you should have some output files, the most important one is merged_probes_methyl_calls.bed as it is the input for the prediction tool. This input contains the aggregation of all methylation calls across ALL bam files. If each bam file is a different sample, then process them independently in different folders.
This mode predicts a set of samples in bed file format given a set of models. Each bed file is considered to be a single sample and is treated independently.
Example usage with the demo data:
sturgeon predict \
-i demo/bed \
-o demo/bed/results/ \
--model-files PATH_TO_MODEL_DIR/general.zip \
--plot-results
In demo/results there should be a .csv file for each sample with the scores for each CNS class. There should also be a .pdf with a barplot representing the predicted scores.
Values indicate the score that the model gave to each class. Higher scores indicate higher confidence in the prediction.
This program can be used during live basecalling. It watches over a folder and waits for bam files (output of Guppy) or txt files (output of Megalodon) to be written there. Then it processes them as they come. This program expects that all bam files in that folder come from the same sample, therefore the amount of sequencing for that sample increases over time. In this line, each bam file will not be treated independently, but instead they will be added in a cumulative manner.
Example usage with demo data (guppy bam files):
sturgeon live \
-i demo/bam \
-o demo/bam/out_live \
-s guppy \
--model-files PATH_TO_MODEL_DIR/general.zip \
--plot-results
Example usage with demo data (megalodon txt files):
sturgeon live \
-i demo/mega \
-o demo/mega/out_live \
-s megalodon \
--model-files PATH_TO_MODEL_DIR/general.zip \
--plot-results
The tool needs to be stopped manually because it will wait infinitely for new files in the target folder. In most systems CTRL+C should interrupt and exit the program.
In the output folder there will be a bunch of intermediate files, the most important ones are:
predictions_modelname.csv: which contains the predicted scores for each CNS class. Each row contains the cumulative predicitions, so row 1 are just the predictions for the first bam file, row 2 are the predictions for the first and second bam files combined, etc.predictions_n_modelname.pdf: these contains barplots for each of the rows in the previous described csv file.predictions_overtime_modelname.pdf: this contains a plot that describes the change in scores over time. Only classes with an average score >0.1 over time are plotted.