Home
Welcome to the ESP32-Camera wiki!
The Soft AP Cam example comes pre-loaded with the hardware. To use it, provide power via the USB connector, look for the TTGO-CAMERA WiFi hotspot, connect to it with password 12345678
then browse to 192.168.1.1 for a video stream. To get a single frame capture, use 192.168.1.1/jpg (you will need to stop the stream page from loading in your browser).
If the camera is not fixed to the PCB behind it, a bit of double backed tape helps improve image quality, as vibration is a serious issue.
todo:
- Setting up the Arduino IDE for ESP32 development, connecting and loading the other example firmware.
info:
-
use this espressif page for instructions on how to install the esp32 board types: https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/boards_manager.md
-
clone the ESP32-Camera repository into your ~/Ardruino/library directory and reboot your Arduino IDE. You should be able to build upload the examples.