Skip to content

Kowus/twitterControl

BranchesTags

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

22 Commits

README.md

README.md

 
 

TwitterRGB.ino

TwitterRGB.ino

 
 

strtok.txt

strtok.txt

 
 

Repository files navigation

Twitter Control by Barnabas Nomo

Example on how to control a robot from Twitter by typing #kofecode and issuing a couple of commands.

Application Cases

  1. type #kofecode to enable trigger watch on current tweet
  2. :1 :2 :3 :4 :5 to specify dotion in different directions (forward, right, backward, left, and stop respectively)
  3. Takes an option and converts it to an integer to determine how long to execute a specific command.
       Eg. #kofecode :1-2000 :2-450 :4-450 :3-2000 :1-6000 
       will cause the robot to move forward for 2 seconds, 
       turn right for 450ms, turn left for 450ms, 
       move backwards for 2 seconds and move forward for 6 seconds;

     In case an option is not stated with any of the : 
     commands,  :1 or :2 will have a delay of 2000, 
     :2 and :4 will have a delay of 450

Hardware

  1. Arduino Uno
  2. One SHEELD Multipurpose Shield
  3. RGB LED
  4. Assembled Robot kit

Note:

      This Tutorial will not cover assembling the robot kit. 
      It will only cover how to use ONE SHEELD's twitter 
      interface to queue commands to control your robot

Download the OneSheeld library and App

Using The Stock Twitter Example

/*

Twitter Shield Example

This example shows an application on 1Sheeld's Twitter shield.

By using this example, you can flash a LED once a certain keyword
is mentioned on Twitter.

OPTIONAL:
To reduce the library compiled size and limit its memory usage, you
can specify which shields you want to include in your sketch by
defining CUSTOM_SETTINGS and the shields respective INCLUDE_ define. 

*/

#define CUSTOM_SETTINGS
#define INCLUDE_TWITTER_SHIELD

/* Include 1Sheeld library. */
#include <OneSheeld.h>

/* A name for led on pin 13. */
int ledPin = 13;
/* A variable to track number of tracked tweets returned. */
int trackingCounter = 0;

void setup() {
  /* Start communication. */
  OneSheeld.begin();
  /* Set the LED pin as output. */
  pinMode(ledPin,OUTPUT);
  /* Subscribe to setOnSelected event for the Twitter shield. */
  Twitter.setOnSelected(&shieldSelection);
  /* Subscribe to onNewTweet event. */
  Twitter.setOnNewTweet(&myTweet);
}

void loop() 
{
  /* Leave the loop empty. */
}

void shieldSelection()
{
  /* Track keyword 1Sheeld on Twitter. */
  Twitter.trackKeyword("1Sheeld");
}

void myTweet(char * userName , char * userTweet)
{
    /* Check if the tweet has 1Sheeld keyword. */
    if(strstr(userTweet,":1")!=0)
    {
      /* Turn on the LED. */
      digitalWrite(ledPin,HIGH);
      /* Use OneSheeld delay for better performance. */
      OneSheeld.delay(1000);
      /* Increment the counter. */
      trackingCounter++;
      /* Turn off the LED. */
      digitalWrite(ledPin,LOW);
    }
    /* Check if the counter reached three times. */
    if(trackingCounter == 3)
    {
      /* Stop tracking the word 1Sheeld. */
      Twitter.untrackKeyword("1Sheeld");
      /* Reset the counter. */
      trackingCounter = 0;
    }
}

This simple example allows you to Track a specific (in this case :1) keyword in your posts, and if it contains a specific keyword, the led turns on.

What if we wanted to check for multiple keywords?

The above example will not work because strstr() will only check if :1 exists in the string, and depending on how you structure your if statements, the code will do every instance once even if you had each keyword multiple entered multiple times.

Example:

         OneSheeld :1 :2 :3 :4 :5 :1 :1 :3 :4
 Using strstr() will only check for :1 once.

Solution

Use string tokens

strtok() doesn't work on AVR platforms so we'll use strtok_r()

you can check the man page on linux. Both commands are similar. (attached, see strtok.txt)

I will brush through the code quickly the code is heavily commented to explain what is happening at what point.

/*
   Twitter Remote Control Robot
   by Barnabas Nomo <https://github.com/Kowus/twitterControl.git>
  To reduce the library compiled size and limit its memory usage, you
  can specify which shields you want to include in your sketch by
  defining CUSTOM_SETTINGS and the shields respective INCLUDE_ define.
*/

#define CUSTOM_SETTINGS
#define INCLUDE_TWITTER_SHIELD
#define INCLUDE_TERMINAL_SHIELD

/* Include 1Sheeld library. */
#include <OneSheeld.h>


char *str1, *token, *subToken, *saveptr1, *saveptr2;
int j, it = 0, dsw = 0, i = 0, subtokens[30];


char *buf[80][1];


// Motor A pins (enableA = enable motor, pinA1 = forward, pinA2 = backward)
int enableA = 11;
int pinA1 = 6;
int pinA2 = 5;

//Motor B pins (enabledB = enable motor, pinB2 = forward, pinB2 = backward)
int enableB = 10;
int pinB1 = 4;
int pinB2 = 3;

set the motor pins to OUTPUT, begin OneSheeld instance and write to phone terminal: waitiing for tweet...

void setup() {
  //  Set Motor Pin Behaviours
  pinMode(enableA, OUTPUT);
  pinMode(pinA1, OUTPUT);
  pinMode(pinA2, OUTPUT);

  pinMode(enableB, OUTPUT);
  pinMode(pinB1, OUTPUT);
  pinMode(pinB2, OUTPUT);
  /* Start communication. */
  OneSheeld.begin();
  Terminal.println("Waiting for tweet...");
  /* Subscribe to setOnSelected event for the Twitter shield. */
  Twitter.setOnSelected(&shieldSelection);
  /* Subscribe to onNewTweet event. */
  Twitter.setOnNewTweet(&myTweet);

}

Leave the void loop blank

void loop()
{
  /* Leave the loop empty. */
}

create shieldSelection function to track keyword

void shieldSelection()
{
  /* Track hashtag #kofecode on Twitter. */
  Twitter.trackKeyword("#kofecode");
}

void myTweet(char * userName , char * userTweet)
{
  for (j = 0, str1 = userTweet; ; j++, str1 = NULL) {
    token = strtok_r(str1, ":", &saveptr1);
    if (token == NULL) {
      dsw = 1;
      break;
    }
    buf[j][0] = token;
    for (i = 0; ; i++, token = NULL) {
      subToken = strtok_r(token, "-", &saveptr2);
      if (subToken == NULL)break;
      buf[j][i] = subToken;
      Terminal.println("Token "+String(j) + " = " + String(buf[j][0]) + \tSubtoken = " + String(buf[j][1]));
      subtokens[j] = String(buf[j][1]).toInt();
      OneSheeld.delay(100);
    }
  }
  int tempToken = 0;
  Terminal.println("\n\n       Blank       \n\n");

  while (dsw) {
    enableMotors();
    tempToken = String(buf[it][0]).toInt();
    switch (tempToken) {
      case 1:
        Terminal.println("case " + String(tempToken));
        if (subtokens[it] != NULL) {
          Terminal.println(String(subtokens[it]) + " is Not Null\n");
          forward(subtokens[it]);
        } else {
          Terminal.println(String(subtokens[it]) + " is Null\n");
          forward(3000);
        }

        break;
      case 2:
        Terminal.print("case " + String(buf[it][0]) + ":\t");
        if (subtokens[it] != NULL) {
          Terminal.println(String(subtokens[it]) + " is Not Null\n");
          turnRight(subtokens[it]);
        } else {
          Terminal.println(String(subtokens[it]) + " is Null\n");
          turnRight(2700);
        }
        break;
      case 3:
        Terminal.print("case " + String(buf[it][0]) + ":\t");
        digitalWrite(blue, LOW);
        digitalWrite(green, HIGH);
        digitalWrite(red, LOW);
        if (subtokens[it] != NULL) {
          Terminal.println(String(subtokens[it]) + " is Not Null\n");
          backward(subtokens[it]);
        } else {
          Terminal.println(String(subtokens[it]) + " is Null\n");
          backward(3000);
        }
        break;
      case 4:
        Terminal.print("case " + String(buf[it][0]) + ":\t");
        if (subtokens[it] != NULL) {
          Terminal.println(String(subtokens[it]) + " is Not Null\n");
          turnLeft(subtokens[it]);
        } else {
          Terminal.println(String(subtokens[it]) + " is Null\n");
          turnLeft(2700);
        }
        break;
      case 5:

        Terminal.print("case " + String(buf[it][0]) + ":\t");
        if (subtokens[it] != NULL) {
          Terminal.println(String(subtokens[it]) + " is Not Null\n");
          brake(subtokens[it]);
        } else {
          Terminal.println(String(subtokens[it]) + " is Null\n");
          brake(1000);
        }
        break;
      default:
        Terminal.print("defaulted: " + String(buf[it][0]) + ": ");
        if (it >= j) {
          Terminal.println("Overflow\texiting...");
          brake(100);
          dsw = 0;

          disableMotors();
          continue;
        }
        else {
          if (subtokens[it] != NULL) {
            Terminal.println(String(subtokens[it]) + " is Not Null\n");
            forward(subtokens[it]);
          } else {
            Terminal.println(String(subtokens[it]) + " is Null\n");
            forward(1000);
          }
          break;
        }

        break;
    }
    it++;
  }
  it=0;
  Terminal.println("Exited");
}

Motor Functions

void enableMotors()
{
  motorAOn();
  motorBOn();
}

void disableMotors()
{
  motorAOff();
  motorBOff();
}

void forward(int time)
{
  brake(50);
  motorAForward();
  motorBForward();
  OneSheeld.delay(time);
}

void backward(int time)
{
  brake(50);
  motorABackward();
  motorBBackward();
  OneSheeld.delay(time);
}

void turnLeft(int time)
{
  brake(50);
  motorABackward();
  motorBForward();
  OneSheeld.delay(time);
}

void turnRight(int time)
{
  brake(50);
  motorAForward();
  motorBBackward();
  OneSheeld.delay(time);
}


void brake(int time)
{
  motorABrake();
  motorBBrake();
  OneSheeld.delay(time);
}
//Define low-level H-bridge commands

//enable motors
void motorAOn()
{
  digitalWrite(enableA, HIGH);
}

void motorBOn()
{
  digitalWrite(enableB, HIGH);
}

//disable motors
void motorAOff()
{
  digitalWrite(enableB, LOW);
}

void motorBOff()
{
  digitalWrite(enableA, LOW);
}

//motor A controls
void motorAForward()
{
  digitalWrite(pinA1, HIGH);
  digitalWrite(pinA2, LOW);
}

void motorABackward()
{
  digitalWrite(pinA1, LOW);
  digitalWrite(pinA2, HIGH);
}

//motor B controls
void motorBForward()
{
  digitalWrite(pinB1, HIGH);
  digitalWrite(pinB2, LOW);
}

void motorBBackward()
{
  digitalWrite(pinB1, LOW);
  digitalWrite(pinB2, HIGH);
}


void motorABrake()
{
  digitalWrite(pinA1, HIGH);
  digitalWrite(pinA2, HIGH);
}
void motorBBrake()
{
  digitalWrite(pinB1, HIGH);
  digitalWrite(pinB2, HIGH);
}

Altogether now

/*
   Twitter Remote Control Robot
   by Barnabas Nomo <https://github.com/Kowus/twitterControl.git>
  To reduce the library compiled size and limit its memory usage, you
  can specify which shields you want to include in your sketch by
  defining CUSTOM_SETTINGS and the shields respective INCLUDE_ define.
*/

#define CUSTOM_SETTINGS
#define INCLUDE_TWITTER_SHIELD
#define INCLUDE_TERMINAL_SHIELD

/* Include 1Sheeld library. */
#include <OneSheeld.h>

/* A variable to track number of tracked tweets returned. */
//int trackingCounter = 0;
char *str1, *token, *subToken, *saveptr1, *saveptr2;
int j, it = 0, dsw = 0, i = 0, subtokens[30];

char *buf[80][1];


// Motor A pins (enableA = enable motor, pinA1 = forward, pinA2 = backward)
int enableA = 11;
int pinA1 = 6;
int pinA2 = 5;

//Motor B pins (enabledB = enable motor, pinB2 = forward, pinB2 = backward)
int enableB = 10;
int pinB1 = 4;
int pinB2 = 3;


void setup() {
  //  Set Motor Pin Behaviours
  pinMode(enableA, OUTPUT);
  pinMode(pinA1, OUTPUT);
  pinMode(pinA2, OUTPUT);

  pinMode(enableB, OUTPUT);
  pinMode(pinB1, OUTPUT);
  pinMode(pinB2, OUTPUT);
  /* Start communication. */
  OneSheeld.begin();
  Terminal.println("Waiting for tweet...");
  /* Subscribe to setOnSelected event for the Twitter shield. */
  Twitter.setOnSelected(&shieldSelection);
  /* Subscribe to onNewTweet event. */
  Twitter.setOnNewTweet(&myTweet);

}

void loop()
{
  /* Leave the loop empty. */
}

void shieldSelection()
{
  /* Track hashtag #kofecode on Twitter. */
  Twitter.trackKeyword("#kofecode");
}

void myTweet(char * userName , char * userTweet)
{
  for (j = 0, str1 = userTweet; ; j++, str1 = NULL) {
    token = strtok_r(str1, ":", &saveptr1);
    if (token == NULL) {
      dsw = 1;
      break;
    }
    buf[j][0] = token;
    for (i = 0; ; i++, token = NULL) {
      subToken = strtok_r(token, "-", &saveptr2);
      if (subToken == NULL)break;
      buf[j][i] = subToken;
      Terminal.println("Token " + String(j) + " = " + String(buf[j][0]) + "\tSubtoken = ") + String(buf[j][1]));
      subtokens[j] = String(buf[j][1]).toInt();
      OneSheeld.delay(100);
    }
  }
  int tempToken = 0;
  Terminal.println("\n\n       Blank       \n\n");

  while (dsw) {
    enableMotors();
    tempToken = String(buf[it][0]).toInt();
    switch (tempToken) {
      case 1:
        Terminal.println("case " + String(tempToken));
        
        if (subtokens[it] != NULL) {
          Terminal.println(String(subtokens[it]) + " is Not Null\n");
          forward(subtokens[it]);
        } else {
          Terminal.println(String(subtokens[it]) + " is Null\n");
          forward(3000);
        }

        break;
      case 2:
        Terminal.print("case " + String(buf[it][0]) + ":\t");
        if (subtokens[it] != NULL) {
          Terminal.println(String(subtokens[it]) + " is Not Null\n");
          turnRight(subtokens[it]);
        } else {
          Terminal.println(String(subtokens[it]) + " is Null\n");
          turnRight(2700);
        }
        break;
      case 3:
        Terminal.print("case " + String(buf[it][0]) + ":\t");
        if (subtokens[it] != NULL) {
          Terminal.println(String(subtokens[it]) + " is Not Null\n");
          backward(subtokens[it]);
        } else {
          Terminal.println(String(subtokens[it]) + " is Null\n");
          backward(3000);
        }
        break;
      case 4:
        Terminal.print("case " + String(buf[it][0]) + ":\t");
        if (subtokens[it] != NULL) {
          Terminal.println(String(subtokens[it]) + " is Not Null\n");
          turnLeft(subtokens[it]);
        } else {
          Terminal.println(String(subtokens[it]) + " is Null\n");
          turnLeft(2700);
        }
        break;
      case 5:

        Terminal.print("case " + String(buf[it][0]) + ":\t");
        if (subtokens[it] != NULL) {
          Terminal.println(String(subtokens[it]) + " is Not Null\n");
          brake(subtokens[it]);
        } else {
          Terminal.println(String(subtokens[it]) + " is Null\n");
          brake(1000);
        }
        break;
      default:
        Terminal.print("defaulted: " + String(buf[it][0]) + ": ");
        if (it >= j) {
          Terminal.println("Overflow\texiting...");
          brake(100);
          dsw = 0;

          disableMotors();
          continue;
        }
        else {
          if (subtokens[it] != NULL) {
            Terminal.println(String(subtokens[it]) + " is Not Null\n");
            forward(subtokens[it]);
          } else {
            Terminal.println(String(subtokens[it]) + " is Null\n");
            forward(1000);
          }
          break;
        }

        break;
    }
    it++;
  }
  it=0;
  Terminal.println("Exited");
}







void enableMotors()
{
  motorAOn();
  motorBOn();
}

void disableMotors()
{
  motorAOff();
  motorBOff();
}

void forward(int time)
{
  brake(50);
  motorAForward();
  motorBForward();
  OneSheeld.delay(time);
}

void backward(int time)
{
  brake(50);
  motorABackward();
  motorBBackward();
  OneSheeld.delay(time);
}

void turnLeft(int time)
{
  brake(50);
  motorABackward();
  motorBForward();
  OneSheeld.delay(time);
}

void turnRight(int time)
{
  brake(50);
  motorAForward();
  motorBBackward();
  OneSheeld.delay(time);
}


void brake(int time)
{
  motorABrake();
  motorBBrake();
  OneSheeld.delay(time);
}
//Define low-level H-bridge commands

//enable motors
void motorAOn()
{
  digitalWrite(enableA, HIGH);
}

void motorBOn()
{
  digitalWrite(enableB, HIGH);
}

//disable motors
void motorAOff()
{
  digitalWrite(enableB, LOW);
}

void motorBOff()
{
  digitalWrite(enableA, LOW);
}

//motor A controls
void motorAForward()
{
  digitalWrite(pinA1, HIGH);
  digitalWrite(pinA2, LOW);
}

void motorABackward()
{
  digitalWrite(pinA1, LOW);
  digitalWrite(pinA2, HIGH);
}

//motor B controls
void motorBForward()
{
  digitalWrite(pinB1, HIGH);
  digitalWrite(pinB2, LOW);
}

void motorBBackward()
{
  digitalWrite(pinB1, LOW);
  digitalWrite(pinB2, HIGH);
}


void motorABrake()
{
  digitalWrite(pinA1, HIGH);
  digitalWrite(pinA2, HIGH);
}
void motorBBrake()
{
  digitalWrite(pinB1, HIGH);
  digitalWrite(pinB2, HIGH);
}

About

Control an arduino robot with twitter

Topics

arduino twitter control-robot commands-using-string-tokens ghana

Resources

Readme
Activity

Stars

5 stars

Watchers

4 watching

Forks

0 forks
Report repository

Releases

No releases published

Packages

No packages published

Languages

  • Other 100.0%