Controller

Files

There are 5 files in this folder:

|---------------|--------------------------------------------------|

File name	Function description
send_recv.h	Header file
---------------	--------------------------------------------------
sendPacket.c	Used to send Ethernet packet (0x9005) to
	configure Core leveraging libpcap, 0x00 is
	used to start program; 0x01 is used to start
	configuration; 0x02 is used to read cpu state
	(pause or start); 0x03 is used to load program;
	0x04 is used to read program loaded in CPU
---------------	--------------------------------------------------
sender_test.c	Has a main function used to configure Core
---------------	--------------------------------------------------
recvPacket.c	Used to receive Ehternet packet returned from
	CPU, 0x02 is state; 0x04 is program loade
	in CPU; 0x05 is "printf" in running progra
receive_test.c	Has a main function used to print information
	returned from CPU
---------------	--------------------------------------------------

Usage

1. Run Makefile (i.e., make ) to generate two binary program, i.e., t_send & t_recv

2. Run t_send (i.e., ./t_send) to configure CPU, you will see a simplied UI, And you can chose any option by inputing the corresponding digit： //======================================================//
   Please chose your option:
   0: set sel to 0, i.e., running mode 1: set sel to 1, i.e., configuring mode 2: read sel 3: configure instruction 4: read instruction 5: open/close black pressure 6: set sel to f, i.e., configuring mode Note: current RAM size is 128 KB
   //======================================================//
   opt is:

   For example, we run the example program by inputing 3 to configure intstuction, and then 0 to run the program

3. You can use 'make RAM_SIZE_KB=128' to specify the RAM size.

4. You can run 'make help' for help;