GitHub - JOZOCHEN/xr_usb_serial: Ldd of xr_usb_serial. XR21V1410/1412/1414 XR21B1411 XR21B1420/1422/1424 XR22801/802/804

JOZOCHEN / xr_usb_serial Public

Notifications You must be signed in to change notification settings
Fork 0
Star 1

Ldd of xr_usb_serial. XR21V1410/1412/1414 XR21B1411 XR21B1420/1422/1424 XR22801/802/804

Notifications

Name		Name	Last commit message	Last commit date
Latest commit History 2 Commits
.gitignore		.gitignore
Makefile		Makefile
README.txt		README.txt
xr_usb_serial_common.c		xr_usb_serial_common.c
xr_usb_serial_common.h		xr_usb_serial_common.h
xr_usb_serial_hal.c		xr_usb_serial_hal.c
xr_usb_serial_ioctl.h		xr_usb_serial_ioctl.h

Repository files navigation

Exar USB Serial Driver
======================
Version 1C  2017/1/11
        Add the 9-bit mode support.
        Disbale the debug messages.
Version 1B, 11/6/2015
Fixed Bug: The conditional logic to support kernel 3.9 was incorrect(line 396 in xr_usb_serial_common.c). 

Version 1A, 1/9/2015

This driver will work with any USB UART function in these Exar devices:
	XR21V1410/1412/1414
	XR21B1411
	XR21B1420/1422/1424
	XR22801/802/804

The source code has been tested on various Linux kernels from 3.6.x to 3.17.x.  
This may also work with newer kernels as well.  


Installation
------------

* Compile and install the common usb serial driver module

	# make
	# insmod ./xr_usb_serial_common.ko


* Plug the device into the USB host.  You should see up to four devices created,
  typically /dev/ttyXRUSB[0-3].


Tips for Debugging
------------------

* Check that the USB UART is detected by the system

	# lsusb

* Check that the CDC-ACM driver was not installed for the Exar USB UART

	# ls /dev/tty*

	To remove the CDC-ACM driver and install the driver:

	# rmmod cdc-acm
	# modprobe -r usbserial
	# modprobe usbserial
	# insmod ./xr_usb_serial_common.ko


Technical Support
-----------------
Send any technical questions/issues to uarttechsupport@exar.com.