Skip to content

Painless multisig for many keys across many cosmos-sdk chains

License

Notifications You must be signed in to change notification settings

Ghost-Drive/multisig-cosmos

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Multisig


Disclaimer: Use at your risk, responsibility for damages (if any) to anyone resulting from the use of this software rest entirely with the user. The author is not responsible for any damage that its use could cause.

Note: use a released version. The main branch is an active development branch. The tool is still a bit rough around the edges, so its best to use from a clean directory and with a clean S3 bucket.


This is a tool for managing multisig txs with Cosmos-SDK based binaries and an AWS S3 bucket.

See the github issue #5661 on the Cosmos-SDK for discussion about multisig handling. This tool is a multi-chain/multi-key solution to that problem using S3 buckets.

How it Works

Quick summary, with much more below:

  • Configure an S3 bucket, some keys, and some chains in a TOML file.
  • Create a directory in the bucket for each chain and key, like /<chain name>/<key name>/
  • All signers have access to the entire s3 bucket, and can read/write at will, so assumption is they are all trusted
  • multisig tx push takes an unsigned tx file and pushes it to the s3 directory along with data needed for signing (eg. account number, sequence number, chain id)
  • multisig tx vote generate a vote tx and push it to s3 directory
  • multisig tx authz generate an authz grant tx (delegate, withdraw, commission, vote) or revoke an authz authorization
  • multisig sign fetches the unsigned tx and signing data for a given chain and key, signs it using the correct binary (eg. gaiad tx sign unsigned.json ...), and pushes the signature back to the directory
  • multisig list lists the files in a directory so you can see who has signed
  • multisig broadcast fetches all the data from a directory, compiles the signed tx (eg. gaiad tx multisign unsigned.json ...), broadcasts it using the configured node, and deletes all the files from the directory so signing can start fresh for a new tx
  • multisig delete deletes txs from the S3 directory

Everything generally tries to clean up after itself, but files are created and removed from the present working directory, so you may want to be somewhere clean. You can also use the multisig raw commands to clean-up the s3 bucket individual files or the multisig delete to clean-up multiple files at once.

Note that s3 doesn't actually have directories, everything is just a file in the bucket, but files can be prefixed with what looks like directory paths. So the appearance of a "directory" is just an empty object with a name ending in a /.

Install

git clone https://github.com/informalsystems/multisig
cd multisig
go install

Make sure your $HOME/go/bin or your $GOPATH/bin is on your $PATH.

Then

multisig help

for the list of commands and options.

Configure

multisig uses a simple config.toml file. Path to config file may be specified via --config flag. If the config path isn't specified explicitly, multisig will look for it in the current working directory. If config file is not present in the current working directory, multisig will look for it in ~/.mulitisig/config.toml. A documented example file is provided in data/config.toml. Copy this example file to your current directory or to ~/.multisig/ and modify it as necessary.

You will need to:

  • Configure your AWS Bucket
  • Configure your Keys
  • Configure your Chains

Configure your AWS Bucket

Each user will need an AWS Access Key ID and Secret Access Key that gives them read/write access to the bucket.

In the [aws] section of the multisig config, each user must set the bucket, bucketregion, pub, and priv fields with the bucket name, AWS region of the bucket, Access Key ID, and Secret Access Key.

# aws credentials

[aws]
bucket = "<bucketName>"         # s3 bucket name
bucketregion = "<bucketRegion>" # aws bucket region
pub = "<access key id>"         # Access Key ID
priv = "<secret access key>"    # Secret Access Key

If you are setting up the bucket for the first time, you can create an AWS IAM Policy that restricts access to a single bucket and attach it to a User or Group:

{
    "Version": "2012-10-17",
    "Statement": [
        {
            "Sid": "ListObjectsInBucket",
            "Effect": "Allow",
            "Action": ["s3:ListBucket"],
            "Resource": ["arn:aws:s3:::bucket-name"]
        },
        {
            "Sid": "AllObjectActions",
            "Effect": "Allow",
            "Action": "s3:*Object",
            "Resource": ["arn:aws:s3:::bucket-name/*"]
        }
    ]
}

See Source.

Configure you Keys

You can specify multiple keys. Each key gets its own [[keys]] table. Each key must have a name used by all signers. The name is a high level name for this key that is independent of any chain or any name in a keystore. The key must also specify its multisig address. The address can be specified using any bech32 prefix, it doesn't matter if its cosmos1 or osmo1 or whatever. The key itself is chain agnostic.

Each user may also specify a localname for the multisig key if they refer to it with a different name in their local keystore than the shared name. If localname is not specified, it defaults to name.

Note this means that each key is expected to have the same local name in each binary's keystore (ie. if its called mycorp-multisig in gaiad, call it mycorp-multisig in osmod)!

As an example:

[[keys]]
name = "mycorp-main"            # name of this multisig key - same for everyone
address = "cosmos1..."          # bech32 address of the key - same for everyone
localname = "mycorp-multisig"   # name of this key in a signer's local keystore - can be different for everyone

Configure gas

If you specify a default value for gas in the configuration file those will be used instead of the hard-coded values coded in the tool.

For example, to set a default gas of 300000 add this to the config file:

defaultGas = 300000

Note: multisig also supports flags that you can specify gas and fees for transaction commands.

Configure your Chains

You can specify multiple chains. Each chain gets its own [[chains]] table. It should include:

  • a name for the chain
  • the binary used to generate, sign, and broadcast txs
  • the bech32 prefix for addresses
  • the chain id for signing
  • the denom for a particular chain (e.g. uatom)
  • an optional node to interact with (for commands that can use/require nodes)
[[chains]]
name = "cosmos"                 # name of the chain
binary = "gaiad"                # name of binary
prefix = "cosmos"               # bech32 prefix
id = "cosmoshub-4"              # chain-id
denom = "uatom"                 # native denom
node = "http://localhost:26657" # a synced node - only needed for `tx` and `broadcast` commands

Run

Commands:

Command Command Line
Broadcast a transaction to the blockchain multisig broadcast
Delete transaction files from S3 multisig delete
Help information multisig help
List transaction files on S3 multisig list
Raw operations commands on S3 and utilities (e.g. convert address) multisig raw
Sign a transaction locally and upload the signature to S3 multisig sign
Create transaction files and upload to S3 multisig tx

Tx

The multisig tx command allows you to push transactions to S3. You can push unsigned.json transactions that are manually generated or you can use commands to generate the transactions and push it automatically to S3.

tx push

multisig tx push <unsigned tx file> <chain name> <key name>

This will push the unsigned tx file (e.g unsigned.json) to the directory in the s3 bucket for the specified chain and key (ie. /<chain name>/<key name>/0).

It will also fetch the account number and sequence number from the given --node <node address>, and push a file to the bucket called signdata.json containing the account number, sequence number, and chain ID. The sequence and account number can be overwriten or specified without a node using the --sequence and --account flags

Note: if you use --node its shelling out to the <binary> query account <address> command and parsing the response.

This assumes that the <binary> (e.g gaiad) is properly installed on the machine and accessible (can be executed from a command prompt e.g. $> gaiad) . The <binary> name is retrieved from the config.toml file.

To push multiple txs for the same chain and key, use the --additional flag. Each additional tx will increment the path suffix and the sequence number. For example, after pushing two txs for the same chain/key pair, you'd have:

cosmos/
cosmos/my-key/
cosmos/my-key/0/signdata.json
cosmos/my-key/0/unsigned.json
cosmos/
cosmos/my-key/
cosmos/my-key/1/signdata.json
cosmos/my-key/1/unsigned.json

To overwrite the first tx, use --force.

tx vote

multisig tx vote <chain name> <key name> <proposal number> <vote option> [flags]

This will generate a tx for a governance proposal vote and it will push it to s3 directly. You will need to specify the proposal number and the vote (e.g. yes, no).

tx withdraw

multisig tx withdraw <chain name> <key name>

This will generate a tx for withdraw all rewards for the account, and it will push it to s3 directly.

tx claim-validator

multisig tx claim-validator <chain name> <key name> <validator_address>

This will generate a tx to claim the rewards and commission from a validator account, and it will push it to s3 directly.

tx authz grant

multisig tx authz grant <chain name> <key name> <grantee address> <delegate|withdraw|commission|vote> <expiration in days>

This will generate a tx to grant authz permissions to a particular account (grantee). You will also need to specify the message-type that you want to grant permission. Currently, only withdraw, commission, delegate, vote are supported. You also need to specify the expiration for this grant, for example to grant permissions for 30 days please specify '30' as the ' parameter.'

tx authz revoke

multisig tx authz revoke <chain name> <key name> <grantee address> <withdraw|commission|delegate|vote> [flags]

This will generate a tx to revoke a previously granted authz permission

List

To see the files in the directory of a chain and key:

multisig list <chain name> <key name> 

To list all the files in the bucket:

multisig list --all

Example output:k

$ multisig list --all
cosmos/
cosmos/mycorp-main/
cosmos/mycorp-validator/
juno/
juno/mycorp-main/
osmosis/
osmosis/mycorp-main/
osmosis/mycorp-main/0/eb.json
osmosis/mycorp-main/0/signdata.json
osmosis/mycorp-main/0/unsigned.json

This shows all the chain/key pairs that have been setup. All of them are empty except osmosis/mycorp-main which has one signature (eb.json).

Delete

To delete multiple files from S3 for a particular chain/key pair:

 multisig delete <chain name> <key name> [flags]

Sign

To sign a tx:

multisig sign <chain name> <key name> --from <local signing key>  --index <tx
index>

Where --from is the name of the key in your local keystore, the same as you would provide to --from in gaiad or other Cosmos-SDK binaries, and --index is the tx index to sign for (default 0).

Broadcast

To assemble the signed tx and broadcast it, run:

multisig broadcast <chain name> <key name>

The --index flag can be used to sign a transaction under that index (default 0). Note that transactions must be broadcast in the index sequential order (e.g. 0, 1, 2).

The --node flag can be used to overwrite what's in the config file.

The --key flag can be used to specify the local multisig key name.

Raw

There are a set of raw subcommands for direct manipulation of bucket objects. This is mostly for debugging purposes and generally should not need to be used. See multisig raw --help and the help menu for each subcommand for more info.

Running the tests

The tests are made in an integrational manner to test the things on the real chain. To bootstrap the tests a local container is launched with an instance of gaia, minio, and multisig tool. Ensure you have docker installed and running before launching the tests. To run the tests use the following command in project's directory:

./run_tests.sh

The command will pull the necessary images and will build the gaia from scratch so the first run can be time-consuming.

TODO

High Priority

  • add denoms to chains and have tx push validate txs are using correct denoms
  • tx push should check fees and gas are high enough
  • broadcast should log the tx once its complete (maybe a log file in each top level chain directory?) - should include the key, tx id, and the description
  • need a way to assign local key names (--from) to keys (possibly on a per-chain basis)
  • use --broadcast-mode block ?
  • new command to show unclaimed rewards for all addresses on all networks

Mid Priority

  • simulate tx to estimate gas
  • add a command for porting a multisig from one binary's keystore to another (ie. decoding the bech32 for each key and running keys add on the new binary)
  • proper error handling - sometimes we just print a message and return no error, but then the exit code is still 0
  • make tx and query response parsing more robust (currently shelling out to CLI commands - should we be using the REST server ? maybe 26657 nodes are more available than rest ? )

Lower Priority

About

Painless multisig for many keys across many cosmos-sdk chains

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Go 88.7%
  • Shell 9.9%
  • Dockerfile 1.4%