Skip to content

the opinionated *best practices* of Fortran FOSS Programmers group

License

CC-BY-SA-4.0 and 2 other licenses found

Licenses found

CC-BY-SA-4.0
LICENSE-CC-by-sa.md
CC0-1.0
LICENSE-CC0.md
Unknown
License-considerations.md
Notifications You must be signed in to change notification settings

Fortran-FOSS-Programmers/Best_Practices

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

22 Commits
 
 
 
 
 
 
 
 
 
 

Best practices and styles guidelines of Fortran FOSS Programmers

an opinionated list of best practices to be a good Fortran FOSS Programmer


Guide | Motivations | References | Copyrights


Guide to the document

Before reading this document, please understand the following conventions.

General rules

General rules are emphasized by blockquotes, e.g.

be standards compliant as much as possible

Examples

In order to clearly explain our motivations we often report examples, both positive and negative. The examples snippets are syntax-highlighted and decorated, e.g.

type foo
  contains
    procedure :: negate_foo
    generic :: operator(.not_foo.) => negate_foo ! .not_foo. is not a valid name
end type

type foo
  contains
    procedure :: negate_foo
    generic :: operator(.notFoo.) => negate_foo ! .notFoo. is a valid name
end type

Compilers support

Not all best practices are supported by all compilers, e.g. if a suggested practice relies on a modern Fortran standard it is likely that few compilers support it. When it is useful, the compilers support is emphasized by a check list like

Compiler Version Support
GNU gfortran 5.3+ ✔️
Intel Fortran 15.03
IBM XL Fortran 14.1

Motivations

standard compliance counts... but practicality counts more

Standards conformance should be considered of paramount relevance:

be standards compliant as much as possible

However, follow this guideline with counsciousness, be ready to be flexible, many are the reasons why you could prefer to break the standard compliance. Practicality imposes a compromise generating a hierarchy of standards conformities:

  • be standards compliant as much as possible...
    • except when practicality needs extensions:
      • prefer extensions that are widely supported by different (possible free) compilers.

Among the common reasons to break standards compliance, the following are worth to be mentioned

  • exploit parallel architectures: Fortran is widely used in High Performance Computing (HPC) where parallel hardware is omnipresent; it is very common the necessity to adopt third party solution (generally a library) to exploit such a hardware; rather than a very promising, but uncommon solutions, prefer: OpenMP, OpenACC, ...
  • consume third party library: some problems thst are not strictly related to mathematical computations (e.g. OS-level operations or runtime errors handling) are often solved using mixed-languages, non standard libraries (typycaly C based, but Python is also commonn nowadays); in such a case consider exploiting ISO_C_BINDING to develop standards compliance codes as much as possible.

TODO: Complete discussion of 'exploit parallel architectures' (first bullet point)

Finally, be conscious that there are other (subtle) aspects that could make your code non-standard: for example, the use of preprocessor directives makes your code not strictly standard since there is no standard Fortran preprocessor. While many Fortraners use the fpp preprocessor which ships with Intel's Fortran compiler, others use the COCO preprocessor[e], and many use no preprocessor at all.

Beautiful is better than ugly

There is a common misconception about computer codes: only the results count, no matter the form of your code. This is wrong from many points of view, but mostly remember that:

in addition to writing code for the computer, you are also writing code for humans, yourself included. The purpose of the calculations and the methods used to do so must be clear

see [1]. This means that results count, but also readability is a value: a readable and clear (and possible concise) code can be easily debugged, improved and maintained (e.g. ported on new architecture). As a consequence, the time you spend on beautify your code is not wasted: it will reduce future works, it will allow easy collaboration with new developers, it will make easy to evolve the code itself.

In the case of code used in high-reliability environments (i.e. nuclear safety), source code may be subject to audits and peer review for verification purposes (i.e. ensuring the code correctly implements its functional specifications). Code which is obscure is difficult to review and verify and may harbor faults which testing does not reveal.

The followings are some guidelines to try to develop beautiful (in the sense of readable/clear) codes:

Naming convention counts

The naming convention is a very personal choice. The following suggestions should be considered as they are... just suggestions.

  • adopt your opinionated naming convention and use it consistently;
  • prefer lowercase: Fortran is a case-insensitive language, thus you cannot rely on lower-UPPER case distinction for syntax checks; however, CamelCase style could help code readability, thus select your way:
    • if you use a strict lowercase style, consider to exploit underscores (lower_case) to improve your names clearness (especially for multi-word names);
    • try to use underscores consistently. For example, if the variables temp_wall and temp-gas have been defined, the floor temperature should be named temp_floor, not tempfloor or floor_temp.
  • names should be descriptive, names should have meaning: do not strive too much in local shortening, adopt names that are auto-explicative; in particular, singular character names should be admissible for only index/counter variables;
    • avoid magic numbers, use parameters, i.e. named constants;
    • logical variables should be named to reflect the state they are used to conveying, e.g.
      • prefer lib_is_initialized vs lib_init;
      • prefer obj_has_parent vs obj_parent;
  • take care of entities disambiguation; often you would have the same name for different entities, e.g. a module name and the name of the main public derived type it defines.
  • the name of source files should reflect the name of the main entity they are defining;

Note that there is at least one case where underscores style cannot be used, i.e. naming defined operators, e.g.

type foo
  contains
    procedure :: negate_foo
    generic :: operator(.not_foo.) => negate_foo ! .not_foo. is not a valid name
end type

In such a case, consider to exploit CamelCase style, e.g.

type foo
  contains
    procedure :: negate_foo
    generic :: operator(.notFoo.) => negate_foo ! .notFoo. is a valid name
end type

General considerations

The following general considerations are not rule of thumb, but they provide interesting details on some common scenario.

TODO: Add more considerations.

Names readability

The following are some interesting suggestions to improve readability. Some of them could be considered anachronistic:

  • write Fortran keywords in all UPPERCASE: this guideline was often adopted (in the near past) to distinguish reserved Fortran keywords from user's defined names; presently, almost all widely used editors provide a fairly complete syntax highlighting support by means of which the Fortran keywords are immediately distinguished form others; as a consequence, before adopt this style, consider to exploit editors highlighting thus saving your typing efforts necessary to capitalized all Fortran keywords;
  • exception could be the naming of global accessible variables (that, indeed should be avoided if they are not parameters): all UPPERCASE names could help to distinguish global scope entities (e.g. module or program variables) from local ones (e.g. procedures variables)

module global_scope
integer :: GLOBAL
contains
  subroutine unsafe(is_local, local_global)
    logical, intent(in)  :: is_local
    integer, intent(out) :: local_global

    local_global = 0
    if (.not.is_local) local_global = GLOBAL
    return
  end subroutine unsafe
end module global_scope
  • avoid naming variables with single-character l, i.e. lower case L: often the lower case name l can be confused with the number constant 1, especially when some mono-spaced/sans-serif fonts are used, e.g. in the statement do l=1, N do you easily distinguish the loop counter from the loop starting value? Again, syntax highlighting sometimes helps to distinguish variables from numeric constants; note that similar considerations could be made also for the single-character name O, i.e. upper case o that could be confused with the number constant 0;
Names meaning

As a rule of thumb (yes, we aforementioned that these are not rule of thumb...) consider that

all names must have a meaning.

Current (modern) Fortran standards (F90 and later) allow long names (up to 63 characters). Consider exploiting all the characters you need, do not strive too much on local shortening.

Let us consider the definition of the air speed of sound: naming it as a, as it is common in some fields, is not a good choice, it being unclear for who is not familiar with this implicit convention; even worst could be to name it as sos for the sake of conciseness: does this variable contain the value of the speed of sound or a help request? A name like speed_of_sound is preferable since it is clear and of reasonable length.

If the speed of sound for multiple materials is needed, consider using an array with named constants representing the index for material, i.e. speed_of_sound(AIR), speed_of_sound(WATER), etc.

Verbosity or names-lengthy could be effectively limited with other helper constructs when/where conciseness helps readability. Let us assume that our speed of sound variable is a member of a derived type representing a gas

type :: gas
  real :: gamma = 0.0
  real :: pressure = 0.0
  real :: speed_of_sound = 0.0
end type gas

Local names shortening could be easily achieved exploiting the associate construct, e.g.

function density(low_pressure_gas)
  type(gas), intent(in) :: low_pressure_gas
  real                  :: density

  associate(gamma => low_pressure_gas%gamma,       &
            pressure => low_pressure_gas%pressure, &
            speed_of_sound => low_pressure_gas%speed_of_sound)
    density = gamma * pressure / (speed_of_sound**2)
  end associate
  return
end function density

NOTE: As of Fortran 2008, gamma is an intrinsic math function; a different variable name should be used to represent the isentropic expansion coefficient (ratio of heat capacities). This illustrates both the importance and (at times) difficulty of choosing good names for variables.

Consider exploiting meaningful names to their extreme. Let us assume we are developing a large library that must deal with numerous objects, and we need to perform the same set of actions on these data, i.e. we need to develop a set of procedures performing the same conceptual action, but on different objects. In order to improve the readability of this large library, it could be helpful to provide to such a procedures set with a complete meaningful and descriptive name, e.g.

subroutine compute_transpose_of_sparse_approximate_matrix(...)
...
subroutine compute_transpose_of_dense_approximate_matrix(...)
...
subroutine compute_transpose_of_sparse_exact_matrix(...)
...
Compiler Version Support
all all ✔️
Entities disambiguation

It could happen that you would like to attribute the same name to different entities in the same scope. An emblematic example is the definition of a derived type. Typically, for important classes, a derived type is defined into its own module. Consequently, you have to select a name (with a meaning) for both the module and the derived type. You could be tempted to write something like

module shape_sphere
  type, public :: shape_sphere ! not allowed
  end type shape_sphere
end module shape_sphere

This is not allowed because two different entities, namely the module and the derived type, have the same name in the same scope. In such a situation, you should consider adopting a convention to disambiguate names. Note that a similar ambiguity happens when you would like to name a variable with the same of its type, e.g.:

type(shape_sphere) :: shape_sphere ! not allowed

Among the others, the following are widely-used disambiguation techniques:

use prefix and or suffix
  • suffix modules with _m and derived type with _t:

module shape_sphere_m
  type, public :: shape_sphere_t
  end type shape_sphere_t
end module shape_sphere_m
  • prefix all modules building up a library (or a package) with a common tag, e.g. pkg_:

module pkg_shape_sphere
  type, public :: shape_sphere
  end type shape_sphere
end module pkg_shape_sphere
use different styles concurrently

Use mixed mode CamelCase/under_score style, one for entity:

module shape_sphere ! underscores for module name
  type, public :: ShapeSphere ! CamelCase for derive type
  end type ShapeSphere
end module shape_sphere

Please note: This style doesn't work in case you have module and/or type names that only consist of a single word. Car and car are the same thing to Fortran compilers, so it will generate namespace conflicts.

exploit submodules (specific for module/derived type disambiguation)

exploit the (new) submodule construct to separate the API definition of the derived type and its actual implementation and, consequently, to distinguish the module name from the derived type being defined, e.g.:

module speaker_interface
  type :: speaker
  contains
    procedure, nopass :: speak
  end type speaker

  interface
    module subroutine speak
    end subroutine speak
  end interface
end module

submodule (speaker_interface) speaker_implementation
contains
  subroutine speak
    print "(A)", "Hello, world!"
  end subroutine speak
end submodule speaker_implementation

Here _interface suffix is used to distinguish the API interface definition of the module from its actual implementation done into the submodule suffixed by _implementation, the derived type speaker being disambiguated at well.

Compiler Version Support
GNU gfortran 5.3+
Intel Fortran 15.03
IBM XL Fortran 14.1
Procedures disambiguation

The disambiguation and readability improvement of procedures naming merit some specific considerations:

  • insert an explicit reference to the class name into each type bound procedure name, e.g.

type :: object
  contains
    procedure :: stuff_1 => perform_stuff_1_on_object
    procedure :: stuff_2 => perform_stuff_2_on_object
    ...
end type object

this allow you to easy move the object and its implementation into other modules preserving namespaces integrity.

  • adopt mixed style CamelCase/under_score to identify procedures with respect other entities, e.g.

type :: gas
  real :: speed_of_sound ! underscores style for variables
  contains
    procedure :: ProjectOnCharacteristics ! CamelCase for procedures
end type gas
  • procedures should have an an action verb into their name ...
  • however, consider to distinguish subroutine from function exploiting the presence (or the absence) of the action verb, i.e. use verb form for subroutine and noun form for function, e.g.

! verb form
subroutine get_useful_thing
end subroutine get_useful_thing
! noun form
function useful_thing
end function useful_thing

Go to TOP or Up

Explicit is better than impl.

Implicit typing can speed the development of codes, but it is difficult to debug/read/understand implicit-defined codes, thus

always exploit implicit none statement:

  • into hosts: place implicit none at the start of each program, module and submodule;
  • into procedures that are not contained into a host: place implicit none at the start of each function and subroutine defined outside a host;

A sane explicit style is

module sane_interface
  implicit none
  type sane_type
    contains
      procedure, nopass :: print_hello
  end type sane_type
end module sane_interface

submodule (sane_inteface) sane_implementation
  implicit none
  contains
    subroutine print_hello
      print "(A)", "Hello, world!"
    end subroutine print_hello
end submodule sane_implementation

program sane
  use sane_interface
  implicit none
  type(sane_type) :: greeter
  call greeter%print_hello
end program sane

Note that is not necessary to add implicit none into the subroutine print_hello because it inherits the clause from its host, namely the submodule sane_implementation.

It is also worth to mention that many compilers offer the possibility to enforce implicit none everywhere by means of dedicated options, e.g. GNU gfortran offers the option -fimplicit-none.

Unusual implicit typing usage

There are particular scenarios where implicit typing could be admissible.

Implicit templating

Exploiting implicit typing and standard include statement could be used to mimic templating programming

subroutine abc_sub
  implicit type(abc) (v)
  include "sub_base-inc.f90"
end subroutine abc_sub

where sub_base-inc.f90 contains just the usage of variable var.

Go to TOP or Up

Simple is better than CoMpleX

Simplicity is a fundamental key to writing readable and maintainable code. In general, a task can be completed by means of different approaches: depending on the particular application, different approaches result in simple or complex codes. In this regard, different programming idioms should be used for different aims, e.g. Object Oriented Programming is tailored to improve code maintainability and reausability for complex (possible generic) tasks, but it could add unnecessary complexity for simple applications.

Concerning simplicity, some aspects should be considered:

Structured is better than unStRUcturED

Commonly, a code could be viewed as sequence of statements that flow from one statement to the next one, but to allow the program to behave differently in response to different inputs, jump statements are often used, making the flow of control generally non-linear. Such flows can be distingushed in structured and unstructured (in the worst case leading to so called spaghetti-code):

  • structured flows are easy to read/improve/maintain because the jump conditions must strictly respect a location constraint allowing the flow to jump into only one prescribed location;
  • unstructured flows are more difficult to follow and thus more difficult to read/improve/maintain because the jump conditions are totally unrestricted allowing the flow to jump anywhere;

While the former is less flexible but more readable the latter may allow very efficient code which is very complex and unreadable. In Fortran, many constructs allow for structured flow, primarily call/return, do/end do, exit, cycle and the branching constructs like select case or if elseif. On the contrary, the most famous unstructured jump statement is goto (unconditional, computed, or assigned, or the related arithmetic IF statement) that allows flow jump to any labelled position (upward or downward) within a program unit.

it is recommended to avoid, as much as possible, goto statement:

  • in almost all cases goto can be replaced by means of structured-safe constructs without any performance penalty while greatly improving readability and maintainability;
  • but exceptions should be allowed for very corner cases that, anyhow, should be in the hands of experts.

As a matter of fact, for very special cases, goto could be very helpful, see [a][b]. Commonly, such applications involves very low-level tasks that are more likely happening in C contest rather Fortran one, e.g. exceptions (errors) handling, resources cleaner/finalizer, ecc... The interested readers could read a recent study of Nagappan et. al. [c] showing that goto is still used on many GitHub-hosted projects. Moreover, goto seems to be extensively used in the Linux kernel, e.g. see [d].

goto is not the evil per se, rather because it likely drives [programmers] to develop unstructured code that flows chaotically as the flight of a butterfly.

Examples

Fortran is a very high-level language, we discourage the usage of goto, but this is not a rule of thumb. The following examples show some cases where goto is commonly used and how to avoid it.

Exception/error handling

Sometimes, the algorithm must take into account the occurences of exceptions or errors and, for example, break a (series) of loop. In the old-good-days, such an exceptions handling was done by means of goto:

do a=1,n
  do b=1,m
    ! do some stuff ...
    if (is_error_occurred) goto 10 ! break out of the outer loop
    ! ...
  end do
end do
10  continue

Although the above code is clear, for large loops it soon becomes obscure: the jump condition goto 10 is not actually telling more than jump on label 10, but label 10 can be anywhere in the current scope, even before the start of the outer loop. The resulting flow is unstructered and could lead to spaghetti code if not carefully handled. On the contrary, we suggest using named do loops:

a_loop : do a=1,n
  b_loop: do b=1,m
    !do some stuff ...
    if (done) exit a_loop ! break out of the outer loop
    !...
  end do b_loop
end do a_loop

The exit statement is more clear, it is jumping outside (to the end) of the outer (named) loop, that is a structured flow: exit can jump only foreward.

Similarly, there are conditions when one wants to skip to the end of the loop body and advance to the next iteration. The classic method of handling this case is also with a goto:

do a=1,n
  ! do some stuff ...
  if (condition_detected) goto 10 ! skip remainder of loop body
  ! do a lot of other things
  x(a) = 0.0
10  continue
end do

The code is clear in this toy example but again, consider code with a complex loop body. Or worse, code structure such as the following:

! This is occasionally seen in FORTRAN 77 code
do 10 a=1,n
  ! do some stuff ...
  if (condition_detected) goto 10 ! skip remainder of loop body
  ! do a lot of other things
  x(a) = 0.0
10 continue ! Please don't do this

or

! This is seen more often in FORTRAN IV and FORTRAN 66 code
do 10 a=1,n
  ! do some stuff ...
  if (condition_detected) goto 10 ! skip remainder of loop body
  ! do a lot of other things
10 x(a) = 0.0 ! Please, please, PLEASE don't do this

The intent of the goto and behavior of the code can be badly obscured. Using both the cycle statement and named loops, the code can be greatly clearified:

a_loop: do a=1,n
  ! do some stuff ...
  if (condition_detected) cycle a_loop ! skip remainder of loop body
  ! do a lot of other things
  x(a) = 0.0
end do a_loop

Here it is clear that the loop a_loop is short-circuited; the intent is to skip the remainder of the loop body and advance to the next iteration of the loop. If cycle occurs on the last iteration of the loop, the loop terminates.

Alternate conditional branches

The arithmetic IF statement is an obsolete control structure which was used to implement alternate branches before the if/elseif/else construct was added to the Fortran standard.

! This is seen often in FORTRAN IV and FORTRAN 66 code
if (j) 10, 20, 30
10 ! Do things if j < 0
  goto 40
20 ! Do things if j == 0
  goto 40
30 ! Do things if j > 0
40 continue

The logic of this example is clear however when branching logic becomes complex and nested and the labels references in the arithmetic IF statement are scattered throughout the code, the code quickly becomes unreadable and unmaintainable.

if (j > 0) then
  ! Do things if j < 0
elseif (j == 0) then
  ! Do things if j == 0
else
  ! Do things if j > 0
end if
Resources cleaner/finalizer

Often, the algoritm allocates resouces that need to be cleaned/finalized when the task is finished and, in general, resources are case-dependent thus different kind of cleaners are necessary.

TODO: Document finalization best practices

References

[a] Go To Statement Considered Harmful, Edsger W. Dijkstra, ACM, Vol. 11, No. 3, March 1968, pp. 147-148.

[b] GOTO Considered Harmful, Frank Rubin, ACM, Vol. 30, No. 3, March 1987, pp. 195-196.

[c] An Empirical Study of Goto in C Code from GitHub Repositories, M. Nagappan, et. al, Proceedings of the 2015 10th Joint Meeting on Foundations of Software Engineering, Pages 404-414, 2015.

[d] USING GOTO IN LINUX KERNEL CODE, R. Wilkens, epistolary discussion with Linus Torvalds, 2003.

[e] Fortran Program coco, D. Nagle, 2012.

Go to TOP or Simple

References

Sources of inspiration:

[1] Modern Fortran: Style and Usage, Norman S. Clerman and Walter Spector.

Go to TOP

Copyrights

This document is released under a Creative Commons Attribution-ShareAlike 4.0 International License.

All the code-snippets contained into this document are released under a Creative Commons CC0 1.0 Universal License.

Go to TOP

About

the opinionated *best practices* of Fortran FOSS Programmers group

Resources

License

CC-BY-SA-4.0 and 2 other licenses found

Licenses found

CC-BY-SA-4.0
LICENSE-CC-by-sa.md
CC0-1.0
LICENSE-CC0.md
Unknown
License-considerations.md

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •