Orca2 rework

[Waylonek]

First off English is not my native language, there may be translation inaccuracies.

My desire was to make vanilla sub more attractive without "over-decorate" it. The rework emphasizes decoration and combining elements with the wall pattern + fit wall's pattern borders in room.

List of changes:

1. Сhanged shape of sub a bit in bottom + fins change.
2. Removed separate docking compartment for being redundant (combined with airlock).
3. Pump output modified( 600->420 ) to fix excessive pumping + the size of the pumps was reduced slightly. NBL saved 0.4605 -> 0.4594.
4. Wiring became more branching (the first junction box is responsible for powering next three junction boxes(2 above rector room(power next junction box lines, 1 near armory(power upper 3 junction boxes)
5. OR circuits moved to the circuit box + a switch added (to disable the annoying flood warning siren).Separate switch to ohygen and fabricators. Added switch to engine.
6. Drains cover the entire boat evenly.
7. Removed labels.
8. Moved a double diving suit locker near armory to captain.
9. Interior and exterior lighting is presented in 3 colours (red, candle and light blue) with alpha 100-125, except ballasts and airlocks with 75. Exterior and ballast lighting is slightly pulsing. Near the ohygen the lights flicker a bit.
10. Fabricators are connected to adjacent cabinets (only one of them is visible, to avoid overlap). The navigation terminal is connected to the status monitor (when the status monitor is activated, it will open (the screen size is thus higher) for a more comfortable visibility.

Debatable design choices:

1. All relays for diving suits, lamps, battery array and docking hatch under juckbox(don't hide in wall).Relays are "unholdable".