Icinga2 Monitoring Plugins

Table of Contents

1. check_nas
2. check_sophos
3. check_switch
4. check_printer
5. check_ups

check_nas

Icinga check for different NAS (currently: Synology, QNAP)

Usage:

check_nas.php [options]

Options:

-t  NAS-Type/ Vendor (Currently supported: synology, qnap)
-m  Mode (Currently supported: disks, volumes, memory, upgrade, cpu)
-s  SNMP-Community
-v  SNMP-Version (Currently supported: 1, 2c)
-h  Host
-w  Warnlimit
-c  Critlimit

Currently supported type-mode-combos:

synology

synology disks
synology volumes
synology memory
synology upgrade
synology cpu

qnap

qnap disks
qnap volumes
qnap memory
qnap cpu

Tested on:

• Synology DS414
• Synology DS115j
• QNAP TS-419P II
• QNAP TS131K

check_sophos

Icinga check for Sophos UTM

Usage

check_sophos.php [options]

Options

-m  Mode (Currently available: cpu, memory, interfaces)
-v  SNMP-Version (Currently supported: 1, 2c)
-s  SNMP-Community
-h  Host
-w  Warnlimit
-c  Critlimit

Tested on

• SG230

check_switch

Icinga check for different switches (currently: HP)

Usage

check_switch.php [options]

Options

-m  Mode (Currently available: cpu, memory, interfaces, temp)
-v  SNMP-Version (Currently supported: 1, 2c)
-s  SNMP-Community
-h  Host
-w  Warnlimit
-c  Critlimit

--mintemp   Minimum operating temperature
--maxtemp   Maximum operating temperature

Note: warnlimit and critlimit are given as percentage of the operating temperature range. Example: mintemp=5°C, maxtemp=15°C, critlimit=95 -> CRITICAL above 14.5°C and below 5.5°C.

Currently supported type-mode-combos:

hp

hp temp
hp cpu
hp memory
hp interfaces

Tested on

• HP V1910-48G
• HP V1910-24G
• HP 1810G-24 (only interfaces)

check_printer

Icinga check for different printers (currently: Kyocera)

Usage

check_printer.php [options]

Options

-t  Type (Currently supported: kyocera)
-m  Mode (Currently available: pages, supplies, inputs)
-v  SNMP-Version (Currently supported: 1, 2c)
-s  SNMP-Community
-h  Host
-w  Warnlimit
-c  Critlimit

--ignoreSheetFeedManual   Manual sheet feeds are empty on a lot of devices on a regular base; set this true to ignore empty or low-on-input sheetFeedManual's in the inputs-check and treat them as ok instead

Currently supported type-mode-combos

kyocera

kyocera pages
kyocera supplies
kyocera inputs

Tested on

• Kyocera FS-4100DN

check_ups

Icinga check for uninterruptible power supplies (currently: Schneider Electric APC)

Usage

check_ups.php [options]

Options

-t  Type (Currently supported: apc)
-m  Mode (Currently available: battery, input, output)
-v  SNMP-Version (Currently supported: 1, 2c)
-s  SNMP-Community
-h  Host
-w  Warnlimit
-c  Critlimit

--minvoltage    Minimum safe voltage on input line (only for mode "input")
--maxvoltage    Maximum safe voltage on input line (only for mode "input")

Currently supported type-mode-combos

apc

apc battery
apc input
apc output

Tested on

• Schneider Electric APC Smart-UPS 3000
• Schneider Electric APC Smart-UPS 750