Overview

This is another Arduino SPI library separated from SdFat library, it uses SPI registers and DMA (Arduino Due only) to accelerate SPI communication.

Thanks to Bill Greiman

Configuration

Put this folder into your arduino "libraries" folder.

I have test this library on Arduino Uno/Mega2560/Due, maybe support other AVR/SAM3X MCUs. You can search keywords like "Arduino Mega2560 pinout" to find pinout mapping with your board.

Connect your slave module to arduino:

SCK to SCK,
MISO to MISO,
MOSI to MOSI,
Reset to Reset,
CS to any digital pin.

• Arduino Uno SPI pinout:

  

• Arduino Mega2560 SPI pinout:

  

• Arduino Due SPI pinout:

  

Example code:

#include <TurboSPI.h>

TurboSPI	g_SPI;
DigitalPin	g_PinCS, g_PinRS;
uint8_t		g_Buffer[256];	// some data buffer to transfer
uint8_t		g_Divisor = 2;	// transfer speed set to MCU's clock divide by 2

void setup()
{
	// setup pins
	g_PinCS.Begin(45);
	g_PinRS.Begin(47);

	g_PinCS.PinMode(OUTPUT);
	g_PinRS.PinMode(OUTPUT);

	// setup SPI
	g_SPI.Begin();
}

void loop()
{
	// setup speed and select slave
	g_SPI.Init(g_Divisor);
	g_PinCS.Low();
	
	// set some pins
	g_PinRS.High();

	// transfer data to slave
	g_SPI.Send(g_Buffer, sizeof(g_Buffer));
	
	// unselect slave
	g_PinCS.High();
}