Skip to content

A pytest plugin to faciliate image comparison for Matplotlib figures

License

Notifications You must be signed in to change notification settings

weiji14/pytest-mpl

 
 

Repository files navigation

Travis Build Status Coveralls coverage

About

This is a plugin to facilitate image comparison for Matplotlib figures in pytest.

For each figure to test, the reference image is subtracted from the generated image, and the RMS of the residual is compared to a user-specified tolerance. If the residual is too large, the test will fail (this is implemented using helper functions from matplotlib.testing).

For more information on how to write tests to do this, see the Using section below.

Installing

This plugin is compatible with Python 2.7, and 3.5 and later, and requires pytest and matplotlib <http://www.matplotlib.org> to be installed.

To install, you can do:

pip install pytest-mpl

You can check that the plugin is registered with pytest by doing:

pytest --version

which will show a list of plugins:

This is pytest version 2.7.1, imported from ...
setuptools registered plugins:
  pytest-mpl-0.1 at ...

Using

To use, you simply need to mark the function where you want to compare images using @pytest.mark.mpl_image_compare, and make sure that the function returns a Matplotlib figure (or any figure object that has a savefig method):

import pytest
import matplotlib.pyplot as plt

@pytest.mark.mpl_image_compare
def test_succeeds():
    fig = plt.figure()
    ax = fig.add_subplot(1,1,1)
    ax.plot([1,2,3])
    return fig

To generate the baseline images, run the tests with the --mpl-generate-path option with the name of the directory where the generated images should be placed:

pytest --mpl-generate-path=baseline

If the directory does not exist, it will be created. The directory will be interpreted as being relative to where you are running pytest. Once you are happy with the generated images, you should move them to a sub-directory called baseline relative to the test files (this name is configurable, see below). You can also generate the baseline images directly in the right directory.

You can then run the tests simply with:

pytest --mpl

and the tests will pass if the images are the same. If you omit the --mpl option, the tests will run but will only check that the code runs without checking the output images.

Options

Tolerance

The RMS tolerance for the image comparison (which defaults to 2) can be specified in the mpl_image_compare decorator with the tolerance argument:

@pytest.mark.mpl_image_compare(tolerance=20)
def test_image():
    ...

Savefig options

You can pass keyword arguments to savefig by using savefig_kwargs in the mpl_image_compare decorator:

@pytest.mark.mpl_image_compare(savefig_kwargs={'dpi':300})
def test_image():
    ...

Baseline images

The baseline directory (which defaults to baseline ) and the filename of the plot (which defaults to the name of the test with a .png suffix) can be customized with the baseline_dir and filename arguments in the mpl_image_compare decorator:

@pytest.mark.mpl_image_compare(baseline_dir='baseline_images',
                               filename='other_name.png')
def test_image():
    ...

The baseline directory in the decorator above will be interpreted as being relative to the test file. Note that the baseline directory can also be a URL (which should start with http:// or https:// and end in a slash). If you want to specify mirrors, set baseline_dir to a comma-separated list of URLs (real commas in the URL should be encoded as %2C).

Finally, you can also set a custom baseline directory globally when running tests by running pytest with:

pytest --mpl --mpl-baseline-path=baseline_images

This directory will be interpreted as being relative to where the tests are run. In addition, if both this option and the baseline_dir option in the mpl_image_compare decorator are used, the one in the decorator takes precedence.

Base style

By default, tests will be run using the Matplotlib 'classic' style (ignoring any locally defined RC parameters). This can be overridden by using the style argument:

@pytest.mark.mpl_image_compare(style='fivethirtyeight')
def test_image():
    ...

Removing text

If you are running a test for which you are not interested in comparing the text labels, you can use the remove_text argument to the decorator:

@pytest.mark.mpl_image_compare(remove_text=True)
def test_image():
    ...

This will make the test insensitive to changes in e.g. the freetype library.

Test failure example

If the images produced by the tests are correct, then the test will pass, but if they are not, the test will fail with a message similar to the following:

E               Exception: Error: Image files did not match.
E                 RMS Value: 142.2287807767823
E                 Expected:
E                   /var/folders/zy/t1l3sx310d3d6p0kyxqzlrnr0000gr/T/tmp4h4oxr7y/baseline-coords_overlay_auto_coord_meta.png
E                 Actual:
E                   /var/folders/zy/t1l3sx310d3d6p0kyxqzlrnr0000gr/T/tmp4h4oxr7y/coords_overlay_auto_coord_meta.png
E                 Difference:
E                   /var/folders/zy/t1l3sx310d3d6p0kyxqzlrnr0000gr/T/tmp4h4oxr7y/coords_overlay_auto_coord_meta-failed-diff.png
E                 Tolerance:
E                   10

The image paths included in the exception are then available for inspection:

Expected Actual Difference
expected actual diff

In this case, the differences are very clear, while in some cases it may be necessary to use the difference image, or blink the expected and actual images, in order to see what changed.

The default tolerance is 2, which is very strict. In some cases, you may want to relax this to account for differences in fonts across different systems.

By default, the expected, actual and difference files are written to a temporary directory with a non-deterministic path. If you want to instead write them to a specific directory, you can use:

pytest --mpl --mpl-results-path=results

The results directory will then contain one sub-directory per test, and each sub-directory will contain the three files mentioned above. If you are using a continuous integration service, you can then use the option to upload artifacts to upload these results to somewhere where you can view them. For more information, see:

Running the tests for pytest-mpl

If you are contributing some changes and want to run the tests, first install the latest version of the plugin then do:

cd tests
pytest --mpl

The reason for having to install the plugin first is to ensure that the plugin is correctly loaded as part of the test suite.

About

A pytest plugin to faciliate image comparison for Matplotlib figures

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Python 100.0%