Skip to content

.Net library for Two Factor Authentication (TFA / 2FA) (.Net7.0)

License

Notifications You must be signed in to change notification settings

waywedo/TwoFactorAuth.Net

 
 

Repository files navigation

Logo .Net library for Two Factor Authentication

Build status NuGet version License PayPal donate button

.Net library, available as NuGet package, for two-factor (or multi-factor) authentication using TOTP and QR-codes. This is a .Net port of the PHP TwoFactorAuth library (staying as close as possible to the PHP implementation, but using .Net conventions and codestyles).

Requirements

Installation

To install TwoFactorAuth.Net, run the following command in the Package Manager Console

PM> Install-Package TwoFactorAuth.Net

Quickstart

Step 1: Set up secret shared key

When a user wants to setup two-factor auth (or, more correctly, multi-factor auth) you need to create a secret. This will be your shared secret. This secret will need to be entered by the user in their app. This can be done manually, in which case you simply display the secret and have the user type it in the app:

var tfa = new TwoFactorAuth("MyCompany");
// Though the default is an 80 bits secret (for backwards compatibility reasons) we 
// recommend creating 160+ bits secrets (see RFC 4226 - Algorithm Requirements)
var secret = tfa.CreateSecret(160);

The CreateSecret() method accepts two arguments: bits (default: 80) and cryptoSecureRequirement (default: RequireSecure). The former is the number of bits generated for the shared secret. Make sure this argument is a multiple of 8 and, again, keep in mind that not all combinations may be supported by all apps. Google Authenticator seems happy with 80 and 160, the default is set to 80 because that's what most sites (that I know of) currently use; however a value of 160 or higher is recommended (see RFC 4226 - Algorithm Requirements). The latter is used to ensure that the secret is cryptographically secure; if you don't care very much for cryptographically secure secrets you can specify AllowInsecure and use a non-cryptographically secure RNG provider.

// Display shared secret
<p>Please enter the following secret in your app: @secret</p>

This results in:

Please enter the following secret in your app: XANIK3POC23RCRYN

Another, more user-friendly, way to get the shared secret into the app is to generate a QR-code which can be scanned by the app. To generate these QR codes you can use any one of the built-in QRProvider classes:

...use a 3rd party one or implement your own QR Code provider. To implement your own provider all you need to do is implement the IQrCodeProvider interface. You can use the built-in providers mentioned before to serve as an example or read the next chapter in this file. The built-in classes all use a 3rd (e.g. external) party (Google, QRServer and QRicket) for the hard work of generating QR-codes (note: each of these services might at some point not be available or impose limitations to the number of codes generated per day, hour etc.). You could, however, easily use any library to generate your QR-codes without depending on external sources. See HowTo: Implement your own QR Code provider on how to do this.

The built-in providers all have some provider-specific 'tweaks' you can 'apply'. Some provide support for different colors, others may let you specify the desired image-format etc. What they all have in common is that they return a QR-code as binary blob which, in turn, will be turned into a data URI by the TwoFactorAuth class. This makes it easy for you to display the image without requiring extra 'roundtrips' from browser to server and vice versa.

// Display QR code to user
<p>Scan the following image with your app:</p>
<p><img src="@tfa.GetQrCodeImageAsDataUri("Bob Ross", secret)"></p>

This results in:

Scan the following image with your app:

Step 2: Verify secret shared key

When the shared secret is added to the app, the app will be ready to start generating codes which 'expire' each period number of seconds. To make sure the secret was entered, or scanned, correctly you need to verify this by having the user enter a generated code. To check if the generated code is valid you call the VerifyCode() method:

// Verify code
tfa.VerifyCode((string)Session["secret"], code);

VerifyCode() will return either true (the code was valid) or false (the code was invalid; no points for you!). You may need to store secret in a session or other persistent storage between requests. The VerifyCode() accepts, aside from secret and code, two more arguments. The first being discrepancy. Since TOTP codes are based on time("slices") it is very important that the server (but also client) have a correct date/time. But because the two may differ a bit we usually allow a certain amount of leeway. Because generated codes are valid for a specific period (remember the period argument in the TwoFactorAuth's constructor?) we usually check the period directly before and the period directly after the current time when validating codes. So when the current time is 14:34:21, which results in a 'current timeslice' of 14:34:00 to 14:34:30 we also calculate / verify the codes for 14:33:30 to 14:34:00 and for 14:34:30 to 14:35:00. This gives us a 'window' of 14:33:30 to 14:35:00. The discrepancy argument specifies how many periods (or: timeslices) we check in either direction of the current time. The default discrepancy of 1 results in (max.) 3 period checks: -1, current and +1 period. A discrepancy of 4 would result in a larger window (or: bigger time difference between client and server) of -4, -3, -2, -1, current, +1, +2, +3 and +4 periods.

The second, dateTime or timestamp (depending on which overload you use), allows you to check a code for a specific point in time. This argument has no real practical use but can be handy for unittesting etc. Unless specified TwoFactorAuth uses the current time.

The third, timeSlice, is an out-argument; the value returned in timeSlice is the value of the timeslice that matched the code (if any). This value will be 0 when the code doesn't match and non-zero when the code matches. This value can be stored with the user and can be used to prevent replay-attacks. All you need to do is, on successful login, make sure timeSlice is greater than the previously stored timeslice.

Step 3: Store secret with user

Ok, so now the code has been verified and found to be correct. Now we can store the secret with our user in our database (or elsewhere) and whenever the user begins a new session, after logging in, we ask for a code generated by the authentication app of their choice. All we need to do is call VerifyCode() again with the shared secret we stored with the user and the entered code and we'll know if the user is legit or not.

Simple as 1-2-3!

See also

Building TwoFactorAuth.Net

You'll need to have Sandcastle Help File Builder (SHFB) installed if you want to build the helpfile. Other than that you only need Visual Studio 2015 (or higher).

License

Licensed under MIT license. See LICENSE for details.

Logo / icon under CC0 1.0 Universal (CC0 1.0) Public Domain Dedication (Archived page)

About

.Net library for Two Factor Authentication (TFA / 2FA) (.Net7.0)

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C# 100.0%