Update development docs

static/docs/development/_sources/quickstart/el9.rst.txt

@@ -0,0 +1,185 @@
+=====================================
+EL9 Quickstart (Rocky Linux and RHEL)
+=====================================
+
+Install Warewulf and dependencies
+=================================
+
+.. code-block:: bash
+
+   sudo dnf groupinstall "Development Tools"
+   sudo dnf install epel-release
+   sudo dnf config-manager --set-enabled crb
+   sudo dnf install golang tftp-server dhcp-server nfs-utils gpgpme-devel libassuan-devel
+
+   git clone https://github.com/hpcng/warewulf.git
+   cd warewulf
+   make genconfig \
+    PREFIX=/usr \
+    BINDIR=/usr/bin \
+    SYSCONFDIR=/etc \
+    DATADIR=/usr/share \
+    LOCALSTATEDIR=/var/lib \
+    SHAREDSTATEDIR=/var/lib \
+    MANDIR=/usr/share/man \
+    INFODIR=/usr/share/info \
+    DOCDIR=/usr/share/doc \
+    SRVDIR=/var/lib \
+    TFTPDIR=/var/lib/tftpboot \
+    SYSTEMDDIR=/usr/lib/systemd/system \
+    BASHCOMPDIR=/etc/bash_completion.d/ \
+    FIREWALLDDIR=/usr/lib/firewalld/services \
+    WWCLIENTDIR=/warewulf
+   make all
+   sudo make install
+
+Configure firewalld
+===================
+
+Restart firewalld to register the added service file, add the service
+to the default zone, and reload.
+
+.. code-block:: bash
+
+   sudo systemctl restart firewalld
+   sudo firewall-cmd --permanent --add-service warewulf
+   sudo firewall-cmd --permanent --add-service nfs
+   sudo firewall-cmd --permanent --add-service tftp
+   sudo firewall-cmd --reload
+
+Configure the controller
+========================
+
+Edit the file ``/etc/warewulf/warewulf.conf`` and ensure that you've
+set the appropriate configuration parameters. Here are some of the
+defaults for reference assuming that ``192.168.200.1`` is the IP
+address of your cluster's private network interface:
+
+.. code-block:: yaml
+
+   ipaddr: 192.168.200.1
+   netmask: 255.255.255.0
+   warewulf:
+     port: 9873
+     secure: false
+     update interval: 60
+   dhcp:
+     enabled: true
+     range start: 192.168.200.10
+     range end: 192.168.200.99
+     template: default
+     systemd name: dhcpd
+   tftp:
+     enabled: true
+     tftproot: /var/lib/tftpboot
+     systemd name: tftp
+   nfs:
+     systemd name: nfs-server
+     exports:
+       - /home
+       - /var/warewulf
+
+.. note::
+
+   The DHCP range ends at ``192.168.200.99`` and as you will see
+   below, the first node static IP address (post boot) is configured
+   to ``192.168.200.100``.
+
+Start and enable the Warewulf service
+=====================================
+
+.. code-block:: bash
+
+   # Start and enable the warewulfd service
+   sudo systemctl enable --now warewulfd
+
+Configure system services automatically
+=======================================
+
+There are a number of services and configurations that Warewulf relies
+on to operate.  If you wish to configure all services, you can do so
+individually (omitting the ``--all``) will print a help and usage
+instructions.
+
+.. code-block:: bash
+
+   sudo wwctl configure --all
+
+.. note::
+
+   If you just installed the system fresh and have SELinux enforcing,
+   you may need to reboot the system at this stage to properly set the
+   contexts of the TFTP contents. After rebooting, you might also need
+   to run ``$ sudo restorecon -Rv /var/lib/tftpboot/`` if there are
+   errors with TFTP still.
+
+Pull and build the VNFS container (including the kernel)
+========================================================
+
+This will pull a basic VNFS container from Docker Hub and import the
+default running kernel from the controller node and set both in the
+"default" node profile.
+
+.. code-block:: bash
+
+   sudo wwctl container import docker://ghcr.io/hpcng/warewulf-rockylinux:9 rocky-9
+
+
+Set up the default node profile
+===============================
+
+Node configurations can be set via node profiles. Each node by default
+is configured to be part of the ``default`` node profile, so any
+changes you make to that profile will affect all nodes.
+
+The following command will set the container we just imported above to
+the ``default`` node profile:
+
+.. code-block:: bash
+
+   sudo wwctl profile set --yes --container rocky-8 "default"
+
+Next we set some default networking configurations for the first
+ethernet device. On modern Linux distributions, the name of the device
+is not critical, as it will be setup according to the HW
+address. Because all nodes will share the netmask and gateway
+configuration, we can set them in the default profile as follows:
+
+.. code-block:: bash
+
+   sudo wwctl profile set --yes --netdev eth0 --netmask 255.255.255.0 --gateway 192.168.200.1 "default"
+
+Once those configurations have been set, you can view the changes by
+listing the profiles as follows:
+
+.. code-block:: bash
+
+   sudo wwctl profile list -a
+
+Add a node
+==========
+
+Adding nodes can be done while setting configurations in one
+command. Here we are setting the IP address of ``eth0`` and setting
+this node to be discoverable, which will then automatically have the
+HW address added to the configuration as the node boots.
+
+Node names must be unique. If you have node groups and/or multiple
+clusters, designate them using dot notation.
+
+Note that the full node configuration comes from both cascading
+profiles and node configurations which always supersede profile
+configurations.
+
+.. code-block:: bash
+
+   sudo wwctl node add n0000.cluster --ipaddr 192.168.200.100 --discoverable true
+
+At this point you can view the basic configuration of this node by
+typing the following:
+
+.. code-block:: bash
+
+   sudo wwctl node list -a n0000.cluster
+
+Turn on your compute node and watch it boot!