NetSimulyzer ns-3 Module

A flexible 3D visualizer for displaying, debugging, presenting, and understanding ns-3 scenarios.

Table of Contents

• About
• Requirements
• Installation
  • Clone (Recommended)
  • Download ZIP
  • Connecting the Module Quickly
  • Connecting the Module Safely
    • Waf (Linking)
    • Code
  • Updating
    • Clone
    • ZIP
• Documentation
  • Building the Documentation
• Configuration Options
• Running the Examples
  • Application State Trace Example
  • Lena Radio Link Failure
  • Mobility Buildings Example
  • WiFi Bianchi
  • Outdoor Random Walk
• Feature Overview
  • Showing Nodes
  • Showing Buildings
  • Decorations
  • Areas
  • Log Streams
  • Series

About

This is the ns-3 companion module the NetSimulyzer. Link this module & run your scenario to see it in 3D.

Requirements

• A C++ 17 compliant compiler
  • Minimum supported compilers:
    • GCC 7.3.0
    • Clang 6.0.0

Installation

Clone (Recommended)

Clone the project into a directory called netsimulyzer in the contrib directory of a supported version of ns-3

1. cd into the contrib directory of ns-3

cd contrib/

2. Clone the project from one of the below URLs

# Pick one of the below
# HTTPS (Choose this one if you're uncertain)
git clone https://github.com/usnistgov/NetSimulyzer-ns3-module netsimulyzer

# SSH
git clone git@github.com:usnistgov/NetSimulyzer-ns3-module.git netsimulyzer

3. (Re)configure & (Re)build ns-3 If you're using a version of ns-3 without CMake, replace ./ns3 with ./waf

# --enable-examples is optional, see `Running the Examples`
# for how to run them
./ns3 configure --enable-examples
./ns3

Download ZIP

If, for whatever reason, git is not available, download the project & unzip it into the contrib directory of ns-3.

Note that updates will have to be performed manually using this method

1. Download the ZIP of the project from the url below:

https://github.com/usnistgov/NetSimulyzer-ns3-module/archive/master.zip

2. Unzip the file into the ns-3 contrib/ directory

unzip NetSimulyzer-ns3-module-master.zip

3. Rename the resulting directory to netsimulyzer, as ns-3 will not accept a module named differently than its directory.

mv NetSimulyzer-ns3-module-master netsimulyzer

Connecting the Module Quickly

If you are linking your module/program to the netsimulyzer module add the following to your CMakeLists.txt(CMake) or wscript(Waf)

CMake

For CMake, add the NetSimulyzer's target ${libnetsimulyzer} to your libraries_to_link list

# Example
build_lib_example(
  NAME your-example-name
  SOURCE_FILES example.cc
  LIBRARIES_TO_LINK
    ${libnetsimulyzer}
    # ...
)

# Module
build_lib(
  LIBNAME your-module-name
  SOURCE_FILES
    # ...
  HEADER_FILES
    # ...
  LIBRARIES_TO_LINK
    ${libnetsimulyzer}
    # ...
)

waf (Legacy)

For waf, add the NetSimulyzer's module name netsimulyzer to the dependency list

# Program
obj = bld.create_ns3_program('program-name', ['netsimulyzer', '''...'''])


# Module
module = bld.create_ns3_module('module-name', ['netsimulyzer', '''...'''])

You may now include & use the netsimulyzer module in code:

#include <ns3/netsimulyzer-module.h>
//...

int main ()
{
    // ...
    auto orchestrator = CreateObject<netsimulyzer::Orchestrator> ("example.json");
    // ...
}

Connecting the Module Safely

You may wish for your module to not have a hard dependency on the netsimulyzer module. The following steps will allow you to link the module & still allow your code to build & run without the module being present.

Build System

CMake

Check for the NetSimulyzer in the ns3-all-enabled-modules list to confirm if the module is present.

Note: if the module linking to the NetSimulyzer module is in the src/ directory, then you'll need to add the HAS_NETSIMULYZER C++ define yourself when you check for the presence of the module. See the N.B. comment in the example below

# Create a list of your required modules to link
# 'core' & 'mobility' are just examples here
set(libraries_to_link "${libcore};${libmobility}")

if(HAS_NETSIMULYZER)
    # If it's there, then it's safe to add to the library list
    list(APPEND libraries_to_link ${libnetsimulyzer})

   # N.B if the module you're linking to is in the `src/` directory
   # of ns-3, then (at least for now), you must also add the C++ define
   # yourself, like this.
   #
   # There's no harm in repeated definitions of the same value, so there's no
   # need to guard this statement
   add_definitions(-DHAS_NETSIMULYZER)
endif()

# Use the `libraries_to_link` list as your dependency list

# Module
build_lib(
  LIBNAME your-module 
  SOURCE_FILES
    # ...
  HEADER_FILES
    # ...
  LIBRARIES_TO_LINK
    ${libraries_to_link}
)

# Example
build_lib_example(
  NAME your-scenario
  SOURCE_FILES scenario.cc
  LIBRARIES_TO_LINK
    ${libraries_to_link}
)

Waf

If you wish for your module/program to be able to build without the netsimulyzer module you may check for its existence by reading bld.env['HAS_NETSIMULYZER'] in your wscript. See below:

def build(bld):
    # Create a list of your required modules to link
    # 'core' & 'mobility' are just examples here
    linked_modules = ['core', 'mobility']

    # Check if 'HAS_NETSIMULYZER' was defined during configuration
    if 'HAS_NETSIMULYZER' in bld.env:
        # If it was defined, then the 'netsimulyzer' is present and we may link it
        linked_modules.append('netsimulyzer')

    # Be sure to pass your list of `linked_modules` to `create_ns3_program`
    # or `create_ns3_module`
    obj = bld.create_ns3_program('application-name', linked_modules)

Code

In addition to the variable in the build environment, the module also defines a C++ macro also named HAS_NETSIMULYZER. This macro may be used in C++ code to check for the presence of the netsimulyzer module.

Note, if you're using CMake and the module is in the src/ directory, you may have to add this definition yourself (scratch/ and module examples are fine). See the CMake build system section for more information.

See the below code sample:

// Guard the include with the macro
#ifdef HAS_NETSIMULYZER
#include <ns3/netsimulyzer-module.h>
#endif

// ...

int main ()
{
    // ...

    // Guard any NetSimulyzer references in code with the macro as well
#ifdef HAS_NETSIMULYZER
    auto orchestrator = CreateObject<netsimulyzer::Orchestrator> ("example.json");
    // ...
#endif
}

Updating

Clone

To update the cloned module, move to the module's root directory and perform a git pull

# From the ns-3 root
cd contrib/netsimulyzer
git pull

ZIP

To update a ZIP installation, remove the old module and replace it with the updated one.

# From the ns-3 root
cd contrib
rm -Rf netsimulyzer

#use this command, or download manually
wget https://github.com/usnistgov/NetSimulyzer-ns3-module/archive/refs/heads/master.zip -O NetSimulyzer-ns3-module-master.zip
unzip NetSimulyzer-ns3-module-master.zip

# Make sure the directory in the ns-3 contrib/ directory is
# named `netsimulyzer`
mv NetSimulyzer-ns3-module-master netsimulyzer

Documentation

For prebuilt versions of the documentation, see the Releases page on GitHub.

Building the Documentation

Sphinx is required to build the documentation.

To run Sphinx to build the documentation, cd into the doc directory in the module and run make [type] for the type of documentation you wish to build.

# From the ns-3 root directory
cd contrib/netsimulyzer/doc

# HTML (Several Pages)
make html

# HTML (One Page)
make singlehtml

# PDF
make latexpdf

# To list other options, just run make
make

The built documentation will now be found in doc/build/[type].

Configuration Options

To configure the build, any of the below may be passed to the configuration stage of ns-3 (ns3 configure) with -- -D[Option1]=ON -D[Option2]=OFF in the form:

./ns3 configure -- -DNETSIMULYZER_PRE_NS3_41_ENUM_VALUE=OFF

All of the following are optional

• NETSIMULYZER_PRE_NS3_41_ENUM_VALUE: Default OFF, set to ON to force compatibility with EnumValue with versions of ns-3 before ns-3.41.
• NETSIMULYZER_CRASH_HANDLER: Default ON, set to OFF to disable the use of NetSimulyzer crash handler that tries to write output in the event of some unusual exit conditions.

Running the Examples

Listed below are the commands to run the examples provided with the module:

If you're using a version of ns-3 without CMake, replace ./ns3 run with ./waf --run. Note that some of these may be disabled for older versions of ns-3.

Application State Trace Example

Example demonstrating tracing the state of a custom ns3::Application using the StateTransitionSink.

./ns3 run application-state-trace-example-netsimulyzer

Lena Radio Link Failure

An adaptation of the 'lena-radio-link-failure' example from the LTE module with statistics tied into the NetSimulyzer

./ns3 run "lena-radio-link-failure-netsimulyzer --simTime=20 --numberOfEnbs=2 --visual=true"

Mobility Buildings Example

Example demonstrating topology/mobility output to the NetSimulyzer

./ns3 run mobility-buildings-example-netsimulyzer

Throughput Sink Example

Example demonstrating how to connect the netsimulyzer::ThroughputSink to the UDP Echo Client & Server applications to graph throughput.

./ns3 run throughput-sink-example-netsimulyzer

WiFi Bianchi

The WiFi Bianchi example from the wifi module with topology, logs, and several statistics. Note: this example is disabled for waf builds (ns3-35 and prior)

./ns3 run "wifi-bianchi-netsimulyzer --trials=1 --nMinStas=10 --nMaxStas=10 --visual=true"

Outdoor Random Walk

A simple example from the buildings module demonstrating integration into an existing scenario

./ns3 run outdoor-random-walk-example-netsimulyzer

Feature Overview

Showing Nodes

Create a NodeConfigurationHelper, set a model for the Nodes and Install() on the Nodes you wish to be displayed in the application.

using namespace ns3;

netsimulyzer::NodeConfigurationHelper nodeHelper{orchestrator};
nodeHelper.Set ("Model", netsimulyzer::models::SMARTPHONE_VALUE);

// Shows every Node in the scenario
for (auto node = NodeList::Begin (); node != NodeList::End (); node++)
    nodeHelper.Install (*node);

// Or install on a container
NodeContainer containerNodes;
containerNodes.Create (2);
nodeHelper.Install (containerNodes);

Showing Buildings

Buildings have a similar setup to Nodes, only there is no requirement for a model.

using namespace ns3;

// Show every building in the scenario
netsimulyzer::BuildingConfigurationHelper buildingHelper{orchestrator};
for (auto building = BuildingList::Begin (); building != BuildingList::End (); building++)
    buildingHelper.Install (*building);

Decorations

For purely visual elements add a Decoration. A Decoration is similar to a NodeConfiguration except its position is set manually.

auto decoration = CreateObject<netsimulyzer::Decoration>(orchestrator);
decoration->SetAttribute ("Model", netsimulyzer::models::CELL_TOWER_POLE_VALUE);
decoration->SetAttribute ("Height", OptionalValue<double>{250.0});
decoration->SetPosition ({5.0, 5.0, 0.0});

Areas

To draw attention to certain areas in the topology, it may be defined as an area. A RectangularArea will draw a rectangle with a border at some defined coordinates

  // ns-3 Rectangle from the Mobility Model
  // 5x5 area around the origin
Rectangle start{-5.0, 5.0, -5.0, 5.0};
auto startingArea = CreateObject<netsimulyzer::RectangularArea>(orchestrator, start);

// Optional (Default: Black)
startingArea->SetAttribute ("BorderColor", GREEN_VALUE);

// The Rectangle may be constructed in place as well
auto finishingArea = CreateObject<netsimulyzer::RectangularArea>(orchestrator, Rectangle{10.0, 7.0, 10.0, 7.0});
finishingArea->SetAttribute ("BorderColor", RED_VALUE);

Log Streams

A LogStream may be used to output messages at a given time during the scenario. A LogStream works similar to a C++ stream (e.g. std::cout).

auto infoLog = CreateObject<netsimulyzer::LogStream> (orchestrator);

// Optional, but highly recommended you set a name for each stream
infoLog->SetAttribute ("Name", StringValue ("Info"));

// Use like std::cout
// Note the * at the beginning
// and '\n' at the end of the message
*infoLog << "Hello "
         << "world!\n";

int number = 5;
*infoLog << "Logs convert numbers to strings for you\n"
         << "See: " << number << '\n';

Series

A series is a collection of points which may be displayed on a chart in the application.

A series may be added to as the scenario runs and points are added at the same time during playback as they were added in the simulation.

There are several types of series, but the simplest is the XYSeries shown below. For the other series types, refer to the documentation.

auto xy = CreateObject<netsimulyzer::XYSeries> (orchestrator);

// Optional, but highly recommended
xy->SetAttribute ("Name", StringValue ("XY Series Example"));

// Default is `Line` (line graph),
// there is also `None` (scatter plot)
xy->SetAttribute ("Connection", EnumValue (netsimulyzer::XYSeries::Line));

// Points are added through `Append (x, y)` calls,
// and may occur at any time
// before or during the simulation
xy->Append (1.0, 1.0);