Turn any electrical irrigation valve into a smart-valve.. or run your pumps on a smart schedule based on your climate! This homebridge plugin exposes a multi-zone irrigation sprinkler dummy control system to Apple's HomeKit. Although a dummy, it brings smarts of an evapotranspiration based climate and plant adaptive irrigation controller with th…

AN IOT DEVICE CONNECTED WITH ANDROID APP FOR SMART IRRIGATION

IOT based System using various Analog Sensors for smart Irrigation

To develop a smart irrigation system to provide irrigation system which is automatic for the plants which help in saving water and money. The main objective is to apply the system for improvement of health of the soil and hence the plant via sensors. Appropriate soil water level is a necessary pre-requisite for optimum plant growth. Also, water …

This IoT-based smart irrigation system, utilizing ESP32 and Blynk, automates irrigation based on soil conditions. Remote monitoring enhances water management for efficient agriculture

In this Project, I will work with Smart irrigation System that has wide scope to automate the complete irrigation system. Here I will be building an IoT based Irrigation System using ESP8266 NodeMCU Module,Arduino Uno , Soil Moisture Sensor Module and DHT11 Sensor. It will automatically irrigate based on the moisture level in the soil, Temperatu…

An Arduino based Smart Irrigation System which sends Live Stats and Data Directly to Your Connected ID. Just Upload the Required Moisture Levels , select the Crop and you are Good to Go.

Interfacing a Soil moisture sensor FC-28 with Arduino. This sensor measures the volumetric content of water inside the soil and gives us the moisture level as output. The sensor is equipped with both analog and digital output, so it can be used in both analog and digital mode.

Smart Irrigation with ESP32 and Flutter Android Application

Codes for my academic project

This repo contains the files for the Final Project for my CSE360: Computer Interfacing course at BracU. Technologies used include Proteus, Arduino, LabView and Virtual ComPort.

GSM-BASED-SMART-IRRIGATION-SYSTEM

Project made for the Personified and Ubiquitous Systems course from Master's Degree in Informatics Engineering

This Arduino sketch utilizes an ESP8266 microcontroller to read temperature, humidity, and soil moisture values using DHT11 and a soil moisture sensor. The data is sent to the Blynk IoT platform for real-time monitoring. Additionally, the system controls a light based on soil moisture levels and sends notifications about water flow status.

This Arduino sketch utilizes an ESP8266 microcontroller to read temperature, humidity, and soil moisture values using DHT11 and a soil moisture sensor. The data is sent to the Blynk IoT platform for real-time monitoring. Additionally, the system controls a light based on soil moisture levels and sends notifications about water flow status.

Automated Irrigation System for Backyard and Kitchen gardens