Embedded SHT Drivers for Sensirion Temperature and Humidity Sensors - Download the Zip Package from the Release Page

Repository for Sensirion humidity and temperature sensor support on Arduino

Sensirion SPS30 driver for ESP32, SODAQ, MEGA2560, UNO,UNO-R4 ESP8266, Particle-photon on UART OR I2C coummunication

Embedded SGP Drivers for Sensirion Gas Sensors - Download the Zip Package from the Release Page

Create your own Do-It-Yourself BLE enabled sensor gadget on the ESP32 platform.

An advanced CO2 Monitor/Meter firmware for ESP32 with Android and iOS App for real time visualization and charting of air data, data logger, a variety of communication options (BLE, WIFI, MQTT, ESP-Now) and many supported sensors.

Embedded SCD Drivers for Sensirion CO2 Sensors - Download the Zip Package from the Release Page

Arduino library for Sensirion SPS30

Embedded UART Driver for Sensirion Particulate Matter Sensors - Download the Zip Package from the Release Page

Embedded i2c Driver for Sensirion Particulate Matter Sensors - Download the Zip Package from the Release Page

Arduino library for Sensirion SCD4x sensors

Arduino library to work with Sensirion's SEN5x environmental sensor modules via I2C

Air quality modules with Nordic nRF52840. Thread network (OpenThread). TheThingsIO. Sensirion. SPEC Sensors. ST Microelectronics.

Embedded driver for the SCD4x sensor family.

Arduino Code Snippets for Raw Sensor Communication with Sensirion Liquid Flow Sensors

RaspberryPi driver for Sensirion SCD4x sensors

SPS30 PM Sensor I2C Driver for Python3

Python-based driver for Sensirion SPS30 particulate matter sensor. Tested on Raspberry Pi Zero/Zero W/3B+/4B.

C driver to work with Sensirion's SEN5x environmental sensor modules via I2C

Sensirion's Gas Index Algorithm provides a VOC and NOx Index output signal calculated from the SGP40/41 raw signals