Skip to content
#

dynamic-parameters

Here are 21 public repositories matching this topic...

Simple WiFiManager for Blynk and ESP32 with or without SSL, configuration data saved in either SPIFFS or EEPROM. Enable inclusion of both ESP32 Blynk BT/BLE and WiFi libraries. Then select one at reboot or run both. Eliminate hardcoding your Wifi and Blynk credentials and configuration data saved in either SPIFFS or EEPROM. Using AsyncWebServer …

  • Updated Oct 9, 2021
  • C++

Blynk and WiFiManager Library for configuring/auto(re)connecting ESP8266/ESP32 modules to the best or available MultiWiFi APs and MultiBlynk servers at runtime, with or without SSL. Configuration data saved in either SPIFFS or EEPROM.

  • Updated Oct 10, 2021
  • C++

Library, now using AsyncWebServer instead of (ESP8266)WebServer, for enabling GSM/GPRS and WiFi running simultaneously as well as configuring/auto(re)connecting at runtime GSM shields to Internet and Blynk and ESP8266/ESP32 WiFi modules to best or available MultiWiFi APs and MultiBlynk servers. Enable adding dynamic custom parameters from sketch…

  • Updated Feb 9, 2022
  • C++

Simple WiFiManager for Blynk and ESP8266/ESP32 (including ESP32-S2, ESP32-C3) with or without SSL, configuration data saved in either LittleFS, SPIFFS or EEPROM. This library, using AsyncWebServer instead of (ESP8266)WebServer, for configuring/auto(re)connecting ESP8266/ESP32 modules to best or available MultiWiFi APs and MultiBlynk servers at r…

  • Updated Feb 9, 2022
  • C++

Simple GSM shield Manager for Blynk and ESP32 / ESP8266 boards, with or without SSL, configuration data saved in SPIFFS / EEPROM. This library enables user to include both Blynk GSM/GPRS and WiFi libraries in one sketch, run both WiFi and GSM/GPRS simultaneously, or select one to use at runtime after reboot.

  • Updated Feb 9, 2022
  • C++

Simple WiFiNINA Manager for Blynk and AVR, UNO WiFi Rev2, SAMD, SAM DUE, STM32, Teensy, RP2040-based boards, with or without SSL, configuration data saved in EEPROM, FlashStorage_SAMD,FlashStorage_STM32 or LittleFS.

  • Updated Feb 9, 2022
  • C++

Library for configuring/auto(re)connecting W5100/W5200/W5500, ENC28J60 and built-in LAN8742A / LAN8720 Ethernet at runtime using Config Portal. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic pa…

  • Updated Dec 5, 2022
  • C++

Light-Weight WiFi/Credentials Manager for AVR Mega, Teensy, SAM DUE, SAMD, STM32, etc. boards running U-Blox WiFiNINA modules/shields. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. Now using WiFiMulti_Generic library

  • Updated Dec 21, 2022
  • C++

"Library to configure MultiWiFi/Credentials at runtime for Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano RP2040 Connect, RASPBERRY_PI_PICO), AmebaD RTL8720DN, etc. boards, using Generic WiFi (WiFiNINA, WiFi101, ESP8266-AT, ESP32-AT, etc.) modules/shields. You can also specify DHCP HostName, static AP and STA IP.…

  • Updated Dec 21, 2022
  • C++

Library to configure MultiWiFi/Credentials at runtime for Portenta_H7 boards, using built-in WiFi (Murata) modules/shields. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Cred…

  • Updated Dec 21, 2022
  • C++

Light-Weight MultiWiFi/Credentials Manager for RP2040W boards using built-in CYW43439 WiFi. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. Library to configure MultiWiFi/Credentials at runtime for RP2040W boards, using CYW43439 WiFi. You can also specify DHCP HostName and STA IP. Use much less memory compared to f…

  • Updated Dec 21, 2022
  • C++

MultiWiFi/Credentials Manager for RP2040W boards using built-in CYW43439 WiFi. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. Library to configure MultiWiFi/Credentials at runtime for RP2040W boards, using CYW43439 WiFi. You can also specify DHCP HostName and STA IP. Use much less memory compared to full-fledge Wi…

  • Updated Dec 21, 2022
  • C++

Light-Weight MultiWiFi/Credentials Manager for ESP32 (including ESP32-S2 and ESP32-C3) and ESP8266 boards boards. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. paragraph=Library to configure MultiWiFi/Credentials at runtime for ESP32/ESP8266 boards. You can also specify DHCP HostName, static AP and STA IP. Use mu…

  • Updated Jan 29, 2023
  • C++

Library using AsyncWebServer to configure MultiWiFi/Credentials at runtime for ESP32 (including ESP32-S2 and ESP32-C3) and ESP8266 boards. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Option…

  • Updated Jan 30, 2023
  • C++

Using advanced SQL techniques and Tableau visualization, this project explores workforce dynamics, managerial structures, and potential salary disparities within an organization's employee database. A flexible SQL stored procedure enhances the analysis, fostering a data-driven approach to organizational insights.

  • Updated Feb 20, 2024

Improve this page

Add a description, image, and links to the dynamic-parameters topic page so that developers can more easily learn about it.

Curate this topic

Add this topic to your repo

To associate your repository with the dynamic-parameters topic, visit your repo's landing page and select "manage topics."

Learn more